To edit a cell, Numbers Help said to double-click on the cell
To change the contents of a cell, Numbers Help said double-click the cell to do the insertion point appears, then enter.
I can double click on a cell, constantly, but rarely the insertion point appears.
How can I make it work every time?
Try adjusting the double-click speed in system preferences > accessibility:
In general, I double click at a rate that is roughly 5 clicks per second. If you are double clicking too slow then numbers can interpret this as two simple clicks rather than a single double click event.
Tags: iWork
Similar Questions
-
Used Firefox (and Xmarks) for many years without problem.
Since the upgrade to the latest version of Firefox, I can't create new bookmarks. When I have a Web page 'star', it does not appear in the folder of Unsorted Bookmarks OR at the bottom of my list of unsorted bookmarks. I'm unable to 1) find my bookmark ANYWHERE and 2) double click on the star to change my bookmark.
Why am I having this problem? I spent too much time quite several times now trying to figure out what was once a task fundamental, almost blind.
Thanks for any help you can provide.You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?
Hi Rose
Refer to the troubleshooting error messages | CS5, CS5.5 bootstrapper
I hope this helps.
Thank you
Varun
-
When I double click the bookmark (star) button a window still down so I can change the bookmark or place it in the folder I want. Now, after the last update of FF13 (June 2012), I can click once and the page is a bookmark in the "home" folder, but when I double click nothing happens. (1) I restarted FF, did not help 2) I rebooted the computer, did not help.
You just click on the star once if the star is high already turned on to indicate that a site is bookmarked. Normally, you would click once to bookmark the current site, then click once, if you want to change the new bookmark. If you double-click and you open and close the pop-up edition.
After you enable hardware acceleration can cause problem with edit op - up doesn't work does not correctly, so in case of problems, you can disable hardware acceleration.
-
Hi after upgrading to the 2015 fall from first Pro CC edition I had the problem that the double click on an icon in the tray will not send the clip to the viewer more. Only endless clicking on, or jumping to another clip following returning to my original clip of choice and eventually will work. It of incredibly tedious and slows down editing big time. Y at - it a new feature, adobe has put in place that I'm missing or is it just a bug? (the phenomenon occurs on my PowerMac and much portable more recent) Anyone else have this problem?
Any help would be appreciated. Thank you!!!
This is on Mac? If so, it is a known problem that is being developed. Possible solutions: select the first clip, then double-click or disable Hover Scrub (in the options of the menu of the project burger/wing Panel).
-
Buy windows 7 from microsoft sotre online and downloaded to computer for about 12 hours.
Installation time can vary depending on factors such as the speed of the processor, memory and your data set (including your personal files, settings and installed applications that must be transferred during the upgrade. Some upgrades may take an average of 2 hours 25 minutes, but there has been cases of up to 20 hours.
Resources: Performance upgrade of Windows 7:
http://blogs.technet.com/chris_hernandez/archive/2009/09/02/Windows-7-upgrade-performance.aspxMy upgrade to Windows Vista Ultimate x 64 to Windows 7 Ultimate x 64 took about 3.5 hours, but I had a large library of applications (8 GB), and a set of data, which was about 68 GBs, so it was understandable
-------If installation still remains non-compliant, turn the system off, wait 10 minutes. Start it again and choose the option on the Boot Manager to restore the installation for Windows Vista, try the following steps below:
1 disable any security software before you attempt to upgrade or do a clean install.
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.
Windows 7 Upgrade Advisor:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7 try the upgrade againIf the problem exists, you may be able to do a custom installation:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
help me with double those of the removal
a table - ACCT_DETAILS
ACCT TRAN_AMT 1111 75 1111 -75 1111 75 1101 105 1112 15 I need to delete records with TRAN_AMT equal to but with the positive and negative sides. In this case, we have 1111 ACCT. I wrote a query to retrieve the desired lines as below (of course, we have DELETE statemet instead of SELECT for deletion);
WITH ACCT_DETAILS AS
(
SELECT 1111 ACCT,-75 DOUBLE TRAN_AMT
UNION ALL
SELECT 1111 ACCT, 75 OF THE DOUBLE
UNION ALL
SELECT 1111 ACCT, 75 OF THE DOUBLE
UNION ALL
SELECT ACCT 1110, 105 DOUBLE
UNION ALL
SELECT 1117 ACCT, 25 DOUBLE
)
SELECT * FROM ACCT_DETAILS HAS
WHERE A.ACCT IN
(
SELECT B.ACCT FROM
ACCT_DETAILS B
WHERE B.ACCT = A.ACCT
AND A.TRAN_AMT = (-1) * B.TRAN_AMT
);
Result:
ACCT TRAN_AMT 1111 75 1111 75 1111 -75 The problem is that I just need to remove 2 rows with positive and negative numbers accurate and leave a positive value. No matter how positive it must stay. The result should be
ACCT TRAN_AMT 1111 75 1101 105 1112 15 Thank you
Sam
SQL > select * from acct_details;
ACCT TRAN_AMT
---------- ----------
1111 75
1111 75
1111 75
1110 105
1117-25
5 selected lines.
SQL > delete
2 of acct_details
3 where rowid not in (select RID)
4 in (select rowid RID)
5 , acct
6 , tran_amt
7, row_number() over (partition by acct arrested by tran_amt desc) rn
8 of acct_details one
9 )
10 where rn = 1
11 );
2 deleted rows.
SQL > select * from acct_details;
ACCT TRAN_AMT
---------- ----------
1111 75
1110 105
1117-25
3 selected lines.
-
Because of the cut-off current, computer turned off and now I can't open torrent
Hello
1 did you receive an error message?
Method 1:
I also suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
If you still can not Utorrent.i, I suggest you to uninstall and reinstall and check.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
-
try to burn a cd put a new drive in as he said, but he told me the same thing
Not possible to burn a cd
Hello
Try to close all programs, then put a CD? Try different speeds and two Live and
Controlled formats. Sometimes, if you have installed several burning programs that they will compete
for resources against each other then uninstall (one or more) could help.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack.Then, work your way through these - don't forget the drive might be bad, could be a loose cable
or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.-----------------------------------------------
Burn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspxHow to burn a CD with Vista
http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/Burn a CD or DVD in Windows Vista
http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/Microsoft video - how to burn CD/DVD
http://www.YouTube.com/watch?v=0BwF60m05m8Excellent Forum for help with programs and CD/DVD problems
http://Club.cdfreaks.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Help! Double vision on the screen...
Double vision on the screen which is so bad I can hardly read what is ISO screen. I had this problem since March. I had to disabled my GeForce 9800 GT since the update of the driver is not good. I uninstalled Aero. The screen is normal for 5-10 minutes, then goes into ugly mode. Sometimes, the computer starts in double vision.
Thank you... JohnIt may not be the video card, it can be the screen itself. It may even be a problem with the hardware. You have another monitor, you can interact with to see if the problem moves - while we will have a good idea if it's the computer or the monitor. The same goes for the Videocard if possible.
You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you should do at least the monitor and video card at least all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.
If the above does not help, I think it is a material and not a software problem. I would take the system to a repair facility of the competent computeer for diagnostic, repair or replacement. You can also consider sending for service to the manufacturer. Compare the cost, schedule, guarantees, parts availability and cost and these things before deciding. The decision is yours.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
right... I just got a new computer, the vista Home premium 64-bit, and I use windows media encoder 9 series to stream live radio broadcasts... everything installs ok, but when I click mixer to sort my sound levels it gives me this error:
"the mixer"sndvol32.exe"application could not be started. the system cannot find the specified file (0 x 80070002).
I searched in google and microsoft, Web sites, I found a fix for vista, but when I try to install that he says theres a problem with this windows installer...
I tried to run in compatibility mode for xp sp2
Any help would be appreciated
Hi DJ_KingSize,
This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.
To resolve this problem, use one of the following methods to change the audio settings for a device.
Method 1: Use the order Volume of Windows
To use the Volume of Windows command to change the audio settings for a device, follow these steps:
1. right click on the speaker in the notification area icon and then click recording devices or reading.
2. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.
3. click on the levels tab.
4. move the cursor upwards or downwards to set the desired volume level, and then click OK
Method 2: Use the control panel
For control panel allows you to change the audio settings for a device, follow these steps:
1. Click Start, click Control Panel, click hardware and sound and then click sound.
2. click on the playback or recording.
3. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.
4. click on the levels tab.
5. move the cursor upwards or downwards to set the desired volume level, and then click OK.
For more information, see the link below:
You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
http://support.Microsoft.com/kb/930095
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
* Please HELP - unable to complete installation of the new flash player...
I've updated my operating system to Mac OS X Mavericks and went on youtube and he told me that my flash player is outdated (SAFARI). I followed the link to download the new version of flash player, which seems to be 11.9 and the process works very well. I reached this box...
and I am completely unable to click on anything whatsoever. When I drag my mouse on one of the three options, they highlight, as well as the button NEXT, but they won't let me click on. The only way out of the window then is to press Alt + Cmd + Esc to force me to leave the Adobe Flash Player installed. Please help me understand what is happening?
In addition, some pages (seems like most) Adobe's Web site won't let me not click on anything either, I do a right click on the links, then open them in new tabs to navigate their Web site.
Thank you in advance!
Download Offline Installer: Flash Player (Mac OS X)
Leave everything except the Finder.
Double-click on the DMG and let it mount & open.
Click with the right button on the installer and choose "view the contents of the package.
In the folder happy / Resources , double-click the Adobe Flash Player.pkg file and let it run.
-
I do not see one of my apps, I see everything on my desktop except the apps app! He said: download error, I need the new Prime Minister because I started to edit in my school where everything is updated. Help! I even tried to download from Adobe on the web but it brought him back to the top of the desktop application...
Please visit: CC help | Download error in the applications tab of Creative Cloud Desktop Application
-
Auto numbering in an editable table cell
I created a dynamic array with Add/Remove buttons line and the second column with text fields. The text field I mean first < enter task 1 > and < enter task 2 > and when the user click on the line button Add then it looks like < enter task 3 >. I tried the display of models but do not know how to get it to auto numbering. I also tried the formcalc script $ = Concat ("" < Task ', $. ") parent.index + 1, ">"). It seemed to work with automatic numbering, but then I could not actually edit the boxes. Any help on this would be greatly appreciated... Thank you.
You did the ReadOnly or protected field?
Also make sure where did you put your code? If it's in the event Calculate, the default value is "calculated - ReadOnly.
Place the code in the Initialize event could help.
Thank you
Srini
-
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
Thank you
PeterHello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.====================================
Or you can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Why Game Center on my device is unable to access the list of friends and the list of games
Game Center do not work. The only thing that works is the home screen. I can't change my message of player. For a list of friends and the list of games, there is a message saying that there are problems with the network. What can I do?
-
Access code will not work to reset iPad
An employee who retires gave his iPad. She gave me an access code and password to his iTunes account. I have reset the password, and you want to "Erase content and settings." I get the message that the password is incorrect. I tried the old pass
-
I can't remove DivUpdate exe to my computer. What can I do?
When I start DivXupdate keeps appearing even though I uninstalled DivX.I cannot uninstall using uninstaller of Windows defender. When I click on it in the control panel that I don't get the option to turn off. The name of the file is DivXUpdate.exe.I
-
No sound, how can I activate audio on in safe mode?
How can I activate audio in safe mode
-
Problem connecting Bluetooth C720
Bluetooth discovery working again AT & T merger 2 C720, but said then the password/PIN invalid Bluetooth C720. I find no way to access it or know what valid pin can be. Any response?