Interactive report - no research on all columns
HelloI have following question:
I have an interactive report based on a query that contains a column that displays data and an image:
Example:
SELECT Col_a,
col_b,
col_c,
"< img src =" #WORKSPACE_IMAGES #small_image.png ">" col_img "
FROM my_table;
In my col_img column properties I put the 'view Type' to "Column of report Standard", it will display the image.
But when I search in my interactive report for example the small Word, it will display all of the columns there are on each line the small word (from my small_image.png).
I already tried to set in the properties of the column col_img ' allow users to:' everything off. It works I can't search only on the col_img column. So, it's ok.
But when I choose in the field of research for 'Search on all columns' it also research the col_img column, what I want.
Is there a solution for this problem?
THX,
Davy
Hello
I have not fully tested this, but you could test.
Go edit the column and set the condition type "ask!" = Expression 1"and for the Expression 1, enter APXWGT
Kind regards
Jari
Tags: Database
Similar Questions
-
Can an interactive report cause more than a column of link?
I couldn't find a post here about this... I don't see any way to add a second column binding to an interactive report. Is there a way?usually just, I put the link directly in the sql statement. Example:
Select a.column1, a.column2, a.column3, ('
click me') "click me".
Table_name from oneThis will pull all the 3 columns as well as create a link on each line. The good thing about this is you can put instructions BOX on the link so that if you have conditions for the link, the case statement could possibly take care of this. By example, if you want only the link if a.column2 > 100, the CASE statement that allows. not sure if I answered your question exactly, but it may be useful somehow...
Noah
Published by: jakhawk on January 12, 2010 08:24
Published by: jakhawk on January 12, 2010 08:24
-
Interactive report, conditional display of the column binding
Hello
We have obligation to disable editing in case this field is 1 (1 = closed).
Is it possible to disable it on interactive report.
-case when status = 1 link in the column should be disabled (not visible) in order to prevent future changes on the payroll.
SELECT payroll_no, status
OF hr_payroll
ORDER BY payroll_no DESC;
I tried the link below, but it does not work in my case.
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
Request Express 4.2.2.00.11
Thank you in advance,
Best regards, FM
Status of the INCIDENT WHEN 'ACTIVE' = then
'
OTHER END null deactivate_employee.Of
EMPLOYEES
What exactly is the error you get? What HTML is displayed in the HTML source code?
Just by looking at it, I would say that you need to remove the "/" before the f? p
Don't forget not this way could cause problems if you start using the checksum, then you might want to look at the use of APEX_UTIL. PREPARE_URL to create your URL.
-
Interactive report, Apex 4.0 Compute column as a percentage
Just a question. How can format us a column to have a % at the end to sign in an interactive report? Tobias posted earlier this week a way to handle this in the standard (SQL-based reports)...
I would do it with a standard column, but right now I'm just calculating the % column against a column built in the query.
Apex 4.0, running IE 7 (yes I know... Its what the customer is responsible to immediately..)
Thank you
Tony Miller
Dallas, TXSimple! sorted now
Just change the jquery selector to match the header that begins by instead of check equal to
changed the code of
$('td[headers^="SAMPLE_PERCENT"]').append('%');
:)
Thank you
-
How to replace the interactive report '-' for null with white columns fields?
The reports interactive one places '-' for null column fields. In the classic report, column null fields remain just as a draft. Y at - it a setting to change how many interactive reports display columns null fields? I would prefer that it be display as the classic report and leave the fields to null as a draft column.
THX
Published by: jngoracle on July 24, 2010 22:43Hello
Will modify your report interactive report attributes.
In the paging section, you can change attribute "see the Null Values as".BR, Jari
-
Interactive report based on the hidden column cell color
Hello
APEX 5.0.1 used here.
How can I set the color of a specific cell (or column) based on a hidden column?
Seems the link that I can't use the built-in feature because I need the custom color returned by my request.
I tried to set the color with javascript by iterate over each line, by taking the value. text() of the color column and value
This color-specific cell. It works, but it requires the column is visible.
A column containing a hexadecimal value of the color does not look good...
I tried to hide / display: no column complete but this messes up the layout.
THX
the force says:
APEX 5.0.1 used here.
How can I set the color of a specific cell (or column) based on a hidden column?
Seems the link that I can't use the built-in feature because I need the custom color returned by my request.
I tried to set the color with javascript by iterate over each line, by taking the value. text() of the color column and value
This color-specific cell. It works, but it requires the column is visible.
A column containing a hexadecimal value of the color does not look good...
I tried to hide / display: no column complete but this messes up the layout.
Specify the color of cell required using the hidden column and a
data
attribute to the property Expression of HTML in the column:#VISIBLE_COLUMN_ALIAS#
Apply a static ID of the visible column to serve as a selector, jQuery, and you can access the invisible color value in your JS code in dynamic action to run the JavaScript Code using the
dataset
property. -
How to reposition the interactive report (IR) research progress indicator?
I would like to place this "turning circle" lower that it's now - or even in the middle of the screen.
IgorHello Igor.
The location of this spinning thing comes from this parameter in apex_3_1.css:
#apexir_LOADER left:48%; position:absolute; top:4px; }
You can override that by putting this code in your HTML PAge Header
Then the circle will appear somewhere in the middle of your page.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this response in marking it as useful or Correct ;-) -
Bug? Interactive report includes the column excluded research
Apex 3.1
I've created an interactive report with a query that includes a 'expensive' column (a function call). To improve performance, I want to exclude this search/filter column.
I unchecked everything under "allow users to"... (filter) on the column attributes page. The column is no longer in the drop-down list under the microscope in the interactive report, but the column ("element_groups" in my example below) is always included in the SQL that is generated when the user makes a search via the "All columns" option (default):
In my view, the column should be excluded from "All columns" research when the column was set to prevent the user from filtering on it.select "CMPCODE", "CODE", "NAME", "SNAME", "ACCOUNTTYPE", "ELEMENT_GROUPS", count(*) over () as apxws_row_cnt from ( select * from ( select ae.cmpcode, ae.code, ae.name, ae.sname, ae.accounttype, string_util_pkg.join_str (cursor(select distinct grpcode from accounting_element_group where cmpcode = ae.cmpcode and code = ae.code order by 1), ',') as element_groups from accounting_element ae where ae.elmlevel = :p852_elmlevel ) r where ((instr(upper("CMPCODE"),upper(:APXWS_SEARCH_STRING_1)) > 0 or instr(upper("CODE"),upper(:APXWS_SEARCH_STRING_1)) > 0 or instr(upper("NAME"),upper(:APXWS_SEARCH_STRING_1)) > 0 or instr(upper("SNAME"),upper(:APXWS_SEARCH_STRING_1)) > 0 or instr(upper("ACCOUNTTYPE"),upper(:APXWS_SEARCH_STRING_1)) > 0 or instr(upper("ELEMENT_GROUPS"),upper(:APXWS_SEARCH_STRING_1)) > 0 )) ) r where rownum <= to_number(:APXWS_MAX_ROW_CNT) order by "CMPCODE","NAME","CODE"
The same problem is reported here:
Is this a bug? Fixed some 3.2 Apex? Apex 4? No work around?
-Morten
http://ORA-00001.blogspot.comHello
Yes, it is a known problem.
It seems that it is fixed on the Apex 4.0.2.00.06
http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/402-patch-189110.html#CHDIHDIBKind regards
Jari -
Interactive report with Null columns
I have a user who wants to export an interactive report, and there need to some columns will appear on export so that he can fill the data later (there is an intermediate step, while we work on getting all the data they need in the database). I created the report query, and there are a handful of columns null or empty (to keep the correct order for export). When I try to add this query to the APEX, in an interactive report, I get an "ORA-00001: unique constraint (APEX_040000.WWV_FLOW_WORKSHEET_COLUMNS_UK2) violated" error.
Googling autour shows me that this happens because of the columns the same name, and the solution is to provide aliases for all columns. My report has alias on all columns, but I can't yet create an interactive report. I tried to change the columns null of empty strings, as well as encompassing the alias in double - quotes, but nothing works. However, I can use my original query to create a standard report, but due to export, this is not ideal.
I was able to create the interactive report with a null and then edited the source column of the report to add to the others. This had to be done one at a time, given that you are trying to add several null columns at the same time gives the same error even once. Unfortunately, when I try and you run the page, I get a ' ORA-20001: get_dbms_sql_cursor error ORA-00918: column ambiguously defined "error.
My original query:
Can someone tell me a way to create an interactive report with multiple null columns?select customer.customer_name as customer, project.name as project_name, trunc(project.estimated_end_dt) as due_date, project_status.project_status_desc as status, null as revenue, project.baseline_effort as baseline_hours, null as projected_cost, null as est_gain_loss, project.actual_hours as actual_hours, project.estimated_hours as projected_hours, null as projected_cost, null as projected_gain_loss, null as roi from project, customer where customer.customer_id = project.customer_id and project.inactive_ind = 0 and project.customer_id is not null and project.estimated_end_dt >= :DTP_P50_STARTDT and project.estimated_end_dt <= :DTP_P50_ENDDT order by customer.customer_name, project.estimated_end_dt;
Hi shimmoril,
The problem is probably that you have two columns aliased as 'projected_cost' (columns 7 and 11).
Hope this helps,
JohnIf you find this information useful, please indicate the 'useful' or 'correct' post so that others benefit. *
-
What is the best way to view an interactive report with 20 columns
Hello
I have an interactive report, given the number of columns (about 20).
What is the best way to view this report... by default to scroll horizontally to see all the columns.
I want to avoid horizontal scrolling.
Thank you
DeepakHello Deepak,
You mean apart using a smaller font size or a larger screen?
You can think to combine / wrapping columns (so more data in a column).
Or hide some less important data and show only on request.Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this response in marking it as useful or Correct ;-) -
Interactive report - display negative sum in red
APEX 4.0.2 RDBMS 11G R2
I have an interactive report (IR) that generates multiple columns in the report. Infrared, (FORMAT > AGGREGATION) I added some of these columns. On columns that represent monetary values, I would like to see all the negative values in red.
Using FIREBUG, I'm able to identify and inspect one of these values but cannot determine the best way to conditionally displays this value (when it is negative) in red.
Thanks in advance.Hello
When I run the page, sum 'A value' column shows <33.25>on the red letters.
If you change the number in S999G999G999G999G990D00 format there is no need to parse number of string in JavaScript.
Please note that separator decimal must be dot (.)Kind regards
Jari-----
33.25>
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
APEX 4: Dynamic Action to manipulate a search string in the interactive report
Hello
I have the following problem. I have an interactive report that shows a few columns and one of them has a barcode that has been saved as a numeric value for display in the column is something like ("123456789"). All works fine so far. If anyone 123456789 they will get the right line and all is well. Unfortunately if I scan in the barcode with a barcode scanner, he enters '01234567890'. I don't have nor the ability to reprogram the scanner BC and I can't change how the data gets displayed.
So I thought I would create a dynamic action that is triggered when the contents of the textfield object change. So, I've created a dynamic action, selected jQuery and entered .apexir_SEARCH and the Change event.
I then chose to run JavaScript and entered as cod:
var newsearch = document.getElementById ('apexir_SEARCH').value.replace (/ ^ [0] + / g, ");
var inputObj = document.getElementById ("apexir_SEARCH");
If (inputObj)
{
Update of the value
inputObj.value = newsearch;
}
So far so good. When I load the page and enter a value from a '0', it works like a charm and it removes the zero. But if I delete again on the page and the search filter, dynamic action will do nothing. I'm really confused, as if I just made a mistake in the JavaScript code or what is the reason, that the action runs only the first time. I have to reload the page and then it will still be to manipulate the string once, but the second time, it won't.
I'm very happy for any help you can provide!
Thank you
DennisHi Dennis,
The thing that comes to mind is to check that the scope of the event of dynamic action is 'live '. If it's on (default) bind, then when a partial page refresh occurs, action will not fire the first time. Direct fires each time.
Hope this helps
-
Hello
Is it possible to create a process that gives an interactive report that is display all of the original columns in the original order etc..
Thanks AndyHello:
The APEX_UTIL provides the methods below to achieve
procedure ir_reset)
-Interactive reports for application and current user session
-Identical to a reset of the user via the menu drop-down
-Reset recreates default filter, control breaks, display columns etc.
--
p_page_id number); -Valid number of page within the current applicationprocedure ir_clear)
-Erases an interactive report for application and current user session
-Remove the filters for an interactive report
-Clears all report filter, including the default filters
-Clears all interactive reports for a given application page
--
p_page_id number); -Valid number of page within the current applicationCITY
-
Insert a button Delete in an interactive report
Hi all
I just watched this series of tutorials with great interest and made the entire application:
http://apps2fusion.com/at/KR/391-Oracle-Apex-person-details-tutorial-02-delete-functionality
Now I'm wondering if it is possible to do the same with an interactive report. Basically, I want to create a button "remove and edit" into 2 separate columns (integrated in the report).
I add a column zero, but it does not work the same way... am I wrong? Is there another way appropriate to achieve this? I get a strange result (IE can not display the icon etc.)
SELECT NULL "Button", JJ. CD_PERM, LAST_NAME, NAME, DT_NAISSANCE, SEX, ANNEE_SESSION, CD_PGM, UNIV_ACCUEIL, INST_ABRG, DUREE_SEJOUR
OF DAF_COURT_SEJOUR_BOURSIER CLSD, GP GEN_PERSONNE, SD DAF_DICTIONNAIRE DAF_TB_INST DTI
WHERE
DD.NO_PERSONNE = GP.NO_PERSONNE AND
DD CD_PERM GROUP CLSD. CD_PERM AND
CLSD. UNIV_ACCUEIL = DTI. CD_INST
Sorry for my bad English!
Thanks for your time
Jeff.Hello Jeff,.
First an interactive report has a default link column in its properties. Simply go to the details of EI and section "link." From there on out, it will be easy enough to implement one of two buttons. For a second, we'll miss sections link. So for this one, you could do several things, such as the selection of the image of your sql query:
SELECT '' "Button", DD.CD_PERM, NOM_FAMILLE, PRENOM, DT_NAISSANCE, SEXE, ANNEE_SESSION, CD_PGM, UNIV_ACCUEIL, INST_ABRG, DUREE_SEJOUR FROM DAF_COURT_SEJOUR_BOURSIER DCSB, GEN_PERSONNE GP, DAF_DICTIONNAIRE DD, DAF_TB_INST DTI WHERE DD.NO_PERSONNE = GP.NO_PERSONNE AND DD.CD_PERM = DCSB.CD_PERM AND DCSB.UNIV_ACCUEIL = DTI.CD_INST
And just add a link in the column itself.
Greetings,
Rutger
http://rutgerderuiter.blogspot.com/
===============================================================================
You can reward this answer by marking as being useful or correct ;-)Published by: Rutger on May 14, 2009 13:41
-
Is this too much to expect in Apex 5.01?
I have an application which records people entering an area.
The idea is to scan badges and save time and the date of that entry.
This is accomplished with a simple form based on the table of the newspaper.
In a subregion of the form, I would have an interactive report that shows to all those who have entered sort by date and time entry descendant who visited today is obvious.
I join the attendant to be able to use the interactive report to be able to select a particular line that could be recovered and placed in the main form to change (a bit like the model of interactive report with a link to a form where updates can be made.)
I can create the report form and the subregion and that seems to work very well for journal entries, but I don't have a clue as to how I would go on the use of the report for access to update data in the form section.
I would be eternally grateful if someone could point me in the right direction!
Is this something that is hard to do in Apex?
Thank you!
Mason
Masong says:
Is this too much to expect in Apex 5.01?
I have an application which records people entering an area.
The idea is to scan badges and save time and the date of that entry.
This is accomplished with a simple form based on the table of the newspaper.
In a subregion of the form, I would have an interactive report that shows to all those who have entered sort by date and time entry descendant who visited today is obvious.
I join the attendant to be able to use the interactive report to be able to select a particular line that could be recovered and placed in the main form to change (a bit like the model of interactive report with a link to a form where updates can be made.)
I can create the report form and the subregion and that seems to work very well for journal entries, but I don't have a clue as to how I would go on the use of the report for access to update data in the form section.
I would be eternally grateful if someone could point me in the right direction!
Is this something that is hard to do in Apex?
Not at all. Try to use the wizard to create a Page to create a form on a Table with report based on the table of the newspaper (choose Normal for page mode and Interactive for the implementation of the report). When finished, separate report and pages of form will have been generated. Go to the report page and copy the region interactive report on the page of the form. The report page can then be deleted if it is not required.
Maybe you are looking for
-
Microtour HP 3500 Pro for Windows XP 32-bit drivers
Hello Can I ask you if it would be possible to help me in what concerns the location of Windows XP Home Edition (32-bit) drivers for Microtour HP Pro 3500 (F4Q49ES product number)? Portal of Support Center from HP I see only drivers for Windows 7 and
-
HP has too many 'UltraSlim Docking Stations.
I have a G1 EliteBook Folio 1040 on command.I want to buy a HP docking station. A. under "supplies & accessories. 1 UltraSlim HP docking stationB9C87UT, $149 Data sheet: 4 ports usb 3.0, 1 RJ-45 port, 1 VGA, 1 line, 1 line, 1 displayport Comptibility
-
ACS 1121 with v5.0 lost PAK
A customer bought a Cisco ACS 1121, it for more than a year. He was then unpacked and the PAK is lost, no. where to find them. Is it possible to recover the lost PAK? Need help very much.
-
How can I find the model of my hp laptop?
I can't find the name of comprehensive model of my HP laptop. I used the Qr code but it was even more confused.Is this just a g6 for laptop PC or IS IT more the model name? MJTS
-
@member (@nextsibling (Jun))?
I have everyone, I have a question which is, ao I can recover next month when I have the month June (in my article, it is a substitution variable that marks the actual period months in my aplication)? I tried to use the formula @member (@nextsibling