ACS 1121 with v5.0 lost PAK

Similar Questions

• restore the configuration of the cisco ACS 1121 ver 5.2 to SNS 3425 ver 5.6

  Dear all,

  We currently have Cisco ACS 1121 ver 5.2 in our production, then we will replace it with the new devices using SNS 3425 ver 5.6.

  Please good to want to help someone can tell you how to restore all the old configuration of devices (ACS 1121 ver 5.2) for the new Member States?

  Best regards

  Yudibagam

  Hello! You must upgrade the current device to a min of v5.4 for restoration work and be supported.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_control_system/5-6/release/notes/acs_56_rn.html

  However, if you're going to go through the upgrade problems then I would say that you upgrade all the way to 5.6 just to be sure :)

  I hope this helps!

  Thank you for evaluating useful messages!

• Replacement of the ACS 1121

  Hi people,

  I have a clarification associated with ACS 1121. Client needs a solution for the ACS function, rather than to invest on the basis of the ISE, is there any model exists in the form of ACS appliance only. In my view, ACS 1121 will be EOS and he said THAT SNS 3415 is the replacement model.

  I'm confused, it is an ISE, but also the ACS and it is separated from issuance of ISE (as a basic and advanced). What should I do, if I need to select SNS 3415 as ACS appliance? It is based, or should I need to add something more?

  Appreciate your help and your support.

  Kind regards

  SID

  You shouldn't base purchase and license in advance. You just buy the license of migration and it will work quite well for your existing users. For more details on this, you can see ordering guide attached ISE.

• 4.2 ACS profiles with Ganymede?

  Hello

  I use 4.2 ACS (device) with network access profiles. It's a very big problem that profiles only support the radius Protocol, I need to use the Protocol Ganymede with profiles. I need Ganymede for permission command. Is it possible to have such a regulation on ACS 4.2:

  -If the logging of NetworkDeviceGroup1 using RADIUS uses local authentication

  -If the logging of NetworkDeviceGroup2 using Ganymede use RSA securID (external Radius Authentication).

  Best regards

  Hello

  GBA 4.X NAP works only with the RADIUS.

  -If you want you can go to ACS 5.X, which is more flexible.

  run the IT role-based authentication / authorization and you can combine roles you need to be more flexible.

  Please visit the sites:

  1) http://www.youtube.com/watch?v=Xin98O-Q4JY

  2) http://www.youtube.com/watch?v=vOxcrEU_-Gw&feature=related

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/access_policies.html

  Kind regards

  Talal

  ==

  Remember responses of the rate that you find useful

  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• I need to get with the technology that I've worked with, I've lost the email with the details

  I lost the e-mail that microsoft technology sent me to return with him if the problem is still how to find him once again, I have the reference number

  Hello kicker1,

  You must use Windows Support Options to communicate with technical support technicians. You can follow the link below to contact technical support technicians:

  http://support.Microsoft.com/kb/295539

  Select your product and follow the instructions in the wizard. Contact them with the file number or your e-mail address. They will be able to shoot recording with the technical support professional you are working with.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Updated encrypted hard drive with Casper and lost my Office Activations

  My crypt company our hard drives with encryption of Symantec and bought Casper drive safe to copy the old hard drive to the new SSD. Everything installs without problem accept I lost my Office Activations. I am running Windows 7 and have the whole Office Suite including Visio and access. We run to Office 365. We changed support to my company and the new company doesn't seem to know how to give me activation which were loaded on my old hard drive information.

  I can return to my old hard drive and store activations against anything other than the serial number of the hard disk and copy the disc but I do not see how to move the activations.

  Please give me some advice. I love this new hard drive speed

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  You can also post in the following forum:

  http://community.office365.com/

• ACS authentication with Active Directory based on ad groups

  Hello

  I'm trying to integrate Cisco ACS 5.4.0.46 with AD and I connected successfully GBA to AD and I used as a successful AD authentication for network devices but my problem now is that anyone with an AD account can connect to network devices that compromises security. I created a group in AD that I would use and I added the group under users and identity stores > external identity stores > Active Directory > groups directory. I also chose source of identity for Default Device Admin as AD1 and under the authorization, an authorization policy that uses a compound condition that uses AD1 and the custom group. However after you have set all that I am still able to connect to the switch with a user not in the custom group. Based on what I have explained to you can someone tell me if Miss me a step?

  Thank you

  Derek Velez

  Thanks for the update and the fence wire. Set default default rules to deny access when user legimitate if does not match a rule set by the administration of the CSA he should get denied access. In your case, it has been updated a permit so that both type of users access (members and non-members of ad groups).

  The best way to resolve these issues is to look at the monitoring and troubleshooting > attempt user > magnifying glass. You will see how this user has been allowed access.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Passwords enable ISE device Administration (ACS) integrating with Active Directory

  I'm working on a standalone application ISE and running into a problem where the password to enable for a device is not shoot properly.  I have the original connection related AD and I policy conditions/results/sets all as they should be working.  My test run is a 2960 S.  I tried to set up ' group aaa authentication enable default Activate ', but the only way I could do a login enabled with which was if the user has configured locally in ISE identity management > identity > users.  Is there something that I missed that tie will enable passwords for a group active directory as I work for the initial logon?

  I see just a mistake with your failure to enable aaa authentication enable. You must specify the Group of Ganymede.

  Right now, I don't have access to my lab with ISE.

  Here's my config for switches used with ACS.

  AAA authentication login GANYMEDE-SRV Group Ganymede + local
  local authentication AAA Console connection
  Group AAA dot1x default authentication RADIUS
  AAA authorization exec GANYMEDE-SRV Group Ganymede + local
  AAA authorization commands 15 GANYMEDE-SRV Group Ganymede + local
  Group AAA authorization network default RADIUS
  AAA accounting exec GANYMEDE-SRV arrhythmic group Ganymede +.
  orders accounting AAA 15 GANYMEDE-SRV arrhythmic group Ganymede +.

  If you give me all out maybe we can understand why your GANYMEDE ISE works do not with the AD. I see no reason except a misconfiguration or another issue.

  Just to go to the mode, you need more aaa authentication command activate by default enable. This activation mode is pushed to the user if he gets the privilege 15. Your problem should be on the profile or politics. With the approval journal, we can see whether or not ISE pushes politics and why?

• How to configure ACS 4 with 802. 1 X

  Hay

  How to set up my ACS server to support 802. 1 X with PEAP.in to authenticate the me (PC).

  Thank you initially

  You can skip the part of the certificate.

• 4.2 ACS Cisco with Active Directory integration

  Hello

  I m new in the administration of the ACS, we have recently implemented on ACS version 4.2 Server

  to manage all the authorization of users in our network.

  We are in an environment with at least one Active Directory server, group, and users.

  Now, I m just able to create a new user in ACS and work with the switch of the customer, do I have to do, is to integrate my 4.2 ACS with Active Directory.

  to work with the user and group that a registry in my ad.

  Can someon help me please?

  Hello

  If you use windows server for CE 4.2 Installing you just need to do this the domain member server.

• ACS integration with Microsoft Active Directory Services

  Hi all

  I was responsible for developing the integration of GBA with MS AD. What I want to know is below assuming I have a software ACS or ACS device and the authentication protocol's RADIUS

  -What is the criterion of the announcement to integrate with ACS to device software

  -Should that AD hosted on the domain controller or not?

  -Otherwise, on what (DC, tree, forest, branch, flower, Fruit) the announcement must be hosted on?

  -What should I do to authenticate users logging into Cisco ACS Security Manager integrated with AD?

  -Are there other dependencies that I'll have to speak categorically in my description?

  Thank you

  Rishi

  First of all, I love the flower fruit one keep it up.

  If ACS is for windows, it can be installed on the domain controller or member server. For detailed information about installation tasks post must have full integration, please see the following link that contains fancy things you are looking for:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  If ACS is soultion engine then you need piece of software called remote agent to be installed either on the domain controller or member server, also check the following link for more details on how to integrate it with AD:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/Rawi.html

  I hope this was informative for you.

  -----------------------------------------------------------------------------

  Please ensure good answers to rate

• ACS Cluster with no identical equipment

  Hello

  GBA, is it possible to perform a cluster A/A or a/s with two devices not identical: a physical device and virtual ACS?

  Best regards

  I have this design work. the virtual is the main and the unit is secondary. trial where you make the config and newspapers, school making work difficult to authenticate.

  hope this helps

  Antero

• Integration appliance ACS 1113 with RSA-Urgent

  Hi Experts,

  I got the following steps to install the fix on ACS 1113 V 4.0 Box.

  Instructions on how to install the patch

  ========================================

  1 extract the ACS CSAuth.exe - 4.0.1 - RSA - SW -CSCsc12614- CSCsd41866.zip

  2 stop the CSAuth service

  3. locate \bin and save a copy of the current CSAuth.exe

  4. copy the extracted the zip to \bin CSAuth.exe new

  5 start the CSAuth service

  In step 3, it was mentioned that locate \bin and save a copy of the current CSAuth.exe (i.e. on device ACS 1113). Could someone help me with the steps to locate the ACS ACS 1113 unit dir.

  Thank you

  Smail

  Satish,

  These steps are for windows-based acs. For the steps of the device are different. You need patch for the device.

  Steps to download for device attached is patch

  You can download the patch from the unit of

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  Please note if assistance

  Kind regards

  ~ JG

• Hi I try to get assistance with a receipt lost and the fact that on the date of receipt, Adobe took twice the amount smame on

  Hi I had lost a receipt for October 17, 2013 that we could recover from Adobe however on the same date the same amount had been caught twice.

  I got 1 and it is very good but we need a refund on the second.

  
  

  Case 0218208111 of what we worked on.

  
  

  I sent the the information with a copy of the bank statement yesterday and I got a response saying the case had been closed earlier.

  
  

  Kind regards

  
  

  Ian Collard
  

  Please try to get the Bill next https://helpx.adobe.com/creative-cloud/help/print-receipt.html

  Concerning

  Stéphane

• Problems with Win 7: lost internet connection and downloads

  Hello

  I'm not sure that the two problems are related... I don't know what topic to choose.

  I have a custom, with Win 7 machine, and I install all required updates. But for a while (months? I turn it off every night) it says 15 updates are available every time that I reboot, and I see no updates installed (I search for installed updates today).

  Anyway, let them go all the way, and when I restart, I have no connection. It's happened several times (everytime I reboot). Maybe that I had the chance to solve the problem by restarting (and reinstalling :)) 15 updates, but today I can't. I am connected by wire to a modem. Our all other computers work.

  I have a job in the process and need my internet connection (easier to work on a desktop computer with large screen of a laptop) and I can't.

  In network and sharing Center, there is a cross between 'Several networks' and the internet. I have the message if I 'connect or disconnect' "no Internet access.

  I did ipconfig, and I get media disconnected. I did not unplug anything!

  I would be very grateful for your help.

  Thank you very much

  Hi Allwyna,

  Thanks for the reply.

  As you said, there are 16 updates that never completed the installation. There could be opportunities updates are at the origin of the problem. So before solve us the connection problem. We should go ahead and first to solve the problem of updates.

  I would like to know you have installed any Security Antivirus software on your computer, if so I first suggest you temporarily disable the Antivirus software install on your computer and check if that helps.

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  Try the methods.

  Method 1:

  I suggest following the steps listed in the article and check if it works.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 2:

  I suggest you to manually reset windows update components.

  http://support.Microsoft.com/en-us/KB/971058

  NOTE: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.