interface not registered error code ox80040155

Similar Questions

• When you try to change the designation in the car, I "interface not registered" error message

  When you attempt to change a drive designation in Vista Home premium, I get the error message "interface not registered". It's new. How can I fix it?

  Hello

  Register the Ole32.dll file. Follow these steps:

  1. click on start and then click Run. The Run dialog box is displayed.

  2. in the Open box, type the following command, and then click OK:

  Regsvr32.exe %Windir%\System32\Ole32.dll

  You receive the following message appears in the RegSvr32 dialog box:

  DllRegisterServer in C:\WINDOWS\System32\ole32.dll successful.

  3. in the RegSvr32 dialog box, click OK.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• so far would not instill error code 646

  so far would not instill error code 646

  http://support.Microsoft.com/kb/2258121 if this post answered your question, click mark as answer .

• System Restore does not work; error code 0 x 80070715

  System Restore will not restore an error occurred in the initialization of the program if the problem persists contact your system administrator. I tried 3 times still not work error code 0 x 80070715. Help, please.

  Hi margZX

  See if this post by Stephen Boots helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/how-do-i-fix-an-error-code0x80070715/c73c6aa1-0770-E011-8dfc-68b599b31bf5

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix it Center does not open error code 0 x 80092003

  Fix it Center does not open error code 0 x 80092003

  Hello Evertonia,.

  If this happens with a fixit tool, then you will need to request support via the link given by Diana D.

  Best regards

  Matthew_Ha

• Network path of the domain server not found, error code 0 x 80070035

  When iwas resumed my shared folder is the path of server domain user network not found error code 0 x 80070035 OS is vista

  Hello

  The question you have posted is related to the area and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• displaying a class not registered error when you call of duty 2 on winds 7?

  whenever I tried to run the game it displays class not registered error

  You said launch, so this may not apply, but apparently, it happens to some people when
  install the game and the fix is not not to use the Autorun feature during installation.
  Go to start-computer and Open the disc. Then run setup.exe from there.

  I don't remember having this problem with COD2. It can only happen if you install to the default location
  Program Files (x 86).
  The game runs without problems on Win7 with no compatibility required setting.

• Creating Office cloud could not update (error code: 1002)

  What is the problem to view this creative cloud desktop could not update (error code: 1002)

  Moving to the cloud creative download & install

  Hello

  Please see I get the error code 1002 when creative cloud tries to update. I'm on my windows desktop 8 and I get a 1002 error message when I update CC?

  Hope that helps!

  Kind regards

  Sheena

• Office of creative cloud could not update error code 2

  I get the screen that says I have an update.  When I click Update I get this message...! Creative office of cloud could not update (error code 2).   It did for several days.  Does anyone else have this problem?

  Bob

  Follow the procedure below:

  1) click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Trash Adobe Creative cloud from Applications Eh well.

  3)

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder.

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and trash folders named AAMUpdater and OOBE.

  4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and trash folders named AAMUpdater, Adobe Application Manager and OOBE.

  5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleaner oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/accordi Tool.zip

  6) click on the link below and download the creative Cloud configuration file and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• program not registered error 771

  I have a system of operating Vista home Premium and a dual tuner Hauppauge TV card digital HVR2200MCE allows you to get free TV. Often I have a problem when the scheduled recording does not start. I get the message, "(titre dele de programme) was not included." There was an unexpected failure. (Error code: 771) ».

  Failure happens most frequently when I record two programs at the same time. The system seems to "forget" that there are two tuners capable of recording simultaneously. If I reinstall the EPG system works for a while until it starts to play again at the top. I also put the Hauppauge driver CD in and downloaded the latest drivers from their Web site. The problem is still there. Three programs have failed to register today.

  Hauppauge say it is all the Microsoft Media Center and they do not have the answers. I hope you can help me.

  Concerning

  Colin

  Hello
  I would suggest you search/post this question in the community of Experts of Windows:
  http://experts.Windows.com/FRMS/default.aspx
  hope this helps,
  B Eddie

• ServicePack 2 KB9481332 not install error code 8007321 and security for windows vista updated it not install error code 8007321

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - F4GJK - KG77H-B9HD2
  The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =
  Windows product ID: 89578-OEM-7332157-00204
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010300.1.0.003
  ID: {1875E091-75B7-41D8-958B-843FB221316C} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_70AFE6BE-656-80070057_E2AD56EA-815-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {1875E091-75B7-41D8-958B-843FB221316C}1.9.0027.06.0.6001.2.00010300.1.0.003x 32*-*-*-*-B9HD289578-OEM-7332157-002042S-1-5-21-3856123575-3819749968-2084870378Dell Inc.. XPS M1330                       Dell Inc.. A12 20080708000000.000000 + 00032323507018400F804090409Eastern Standard Time(GMT-05:00)03DELL M08 1001002007 Microsoft Office system1236C3896821FDB0Cj14tOk8/me2hXF/W2AM1dxJcsw =89451-OEM-6672833-451754

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6001.18000
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500204-02-1033-6001.0000-2972008
  Installation ID: 002291501995125740168792437623497931990145071114719384
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: B9HD2
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current Hash HWID: OgAAAAEABgABAAEAAQABAAAAAwABAAEA6GEAhAqefPQSeei4YNEM8kaDuLdEnPL0mEaGdW4LrFZGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  SSDT PmRef CpuPm

  Hi crawlerpa,
   
  We have checked for Service pack 2 KB9481332 and the error code 8007321. Unfortunately, not found no information on this subject. We recommend you to cross check if the number you entered is correct and provide us with the exact error code.
   
  To download and install Service Pack 2, click download the Service Pack 2
  Learn How to get the latest Windows Vista service pack
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 build 7601 this copy of Windows is not genuine; Error code: 0xC004F00F

  After having my laptop HP running Windows 7 Home Edition, I've upgraded to windows 7 Professional for about 2 years and around a week ago I installed a

  "new version of Norton IS, I started to get the message" this copy of Windows is not genuine windows 7 build 7601 "at the bottom right of my screen. I have

  saw a similar post, but my screen is black and it lights up as soon as I start the computer. I also get a message for me to reactivate my windows home

  Office 2010.  I ran the diagnostic test and I hope that's what you need to help me with this problem. Thank you.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - 4J3VW - XVQK7-BWD2B
  The Windows Product Key hash: WcNHDwLv5paD/eefqvX5uUXoDRU =
  Windows product ID: 00371-618-3505251-85108
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {5784C0D0-4969-418A-AA89-A5A78B84B9A2} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130318 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {5784C0D0-4969-418A-AA89-A5A78B84B9A2}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BWD2B00371-618-3505251-851085S-1-5-21-657019066-3532337813-3506971876Hewlett-PackardHP G62 Notebook PCHewlett-PackardF.2920110407000000.000000 + 00091A73C07018400F404090409Time(GMT-05:00) Standard is03HPQOEMSLIC-MPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-618-350525-01-1033-7600.0000-0292011
  Installation ID: 019271555776321734386026126923856886019191222691852860
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: BWD2B
  License status: Notification
  Reason for the notification: 0xC004F00F.
  Remaining Windows rearm count: 2
  Trust time: 01/05/2013 18:59:59

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:9:2013 13:48
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: NAAAAAIAAQABAAEAAQACAAAAAwABAAEAln2I1E40gHbQSXiMXK7eiOpFWHJ065h/sssYeQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HP 1444
  FACP HP 1444
  HP HPET 1444
  START HP 1444
  HP MCFG 1444
  SLIC SLIC-MPC HPQOEM
  SSDT AMD POWERNOW

  Partial product key: BWD2B
  License status: Notification
  Reason for the notification: 0xC004F00F.

  Error code: 0xC004F00F

  The software licensing server reported that the hardware ID binding is beyond the level of tolerance.

  Norton products have the bad habit of playing with things, that it should not

  You must activate by phone

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.