Internal error: failed to expand shell folder constant "userappdata".

Similar Questions

• Error internal failed to expand shell folder constant userappdata

  Hello everyone.

  I have a big problem I can open only in safe mode with net working. Started getting the error message internal failure to open data constant userapp of the shell folders. has tried to fix ask .com did not work. $70,00 computer store envy I don't at this time can someone help me with please solve this, thanks to you all, otherwise I'll live with safe mode, until I can afford to have it fixed. Windows 7.

  Thank you all very much, I know that there are some brilliant mind out there help please

  C. Russell

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  As I see most of the users have solved the problem by trying the steps suggested by Mr. Dave_D Support Engineer from the following link. The procedure of link below contains steps for Windows Vista, but remains valid for Windows 7.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/internal-error-failed-to-expand-shell-folder/469b0600-9c3c-4E96-98E0-b4342c40df2c

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Post us the results after trying the steps above.

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• CS6 LR does not start, gives 2 error messages: internal error (failed to create the develop Presets; error has occurred the attempt to change the modules.

  I am running Yosemite (OS 10.10.5). Trying to open 6 LR, I get two error messages. (1) an internal error has occurred. Could not create the required folder: / Users/username/Library/Application Support / Adobe / Lightroom / develop Presets. (2) an error occurred when attempting to change modules.

  When I tried LR 5 running on the previous system, I got the same error module changing, but cannot find anything on the Adobe site and thought that maybe the program was not compatible with the system. But here again the same problem. I really want to stop using the old computer with LR 3 and use the updates, I bought.

  Hi Benjamin,

  You must change the permissions of the folder Adobe in two libraries.

  Browse to the location: ~/Library/Application Support/Adobe

  / Library/Application Support/Adobe

  CMD + click on the Adobe folder

  Click on Get Info

  Click the Permission & sharing

  Click on the padlock

  Unlock it

  Change the permissions of writing & for all users.

  Check the link and try the Solution 5: error changing modules

  Let us know if it helps.

  ~ Mohit

• Get the below question "internal error - failed to initialize the driver of the NLS in a load"

  
  Hi all

  in my project I use the odbc driver with the version as "11.02.00.01" with the 32-bit version, I use the oracle 11g. If I try to connect to my odbc driver, I get the point above.

  for the above, I tried the following, by setting the NLS_LANG in the variable environment, but it does not solve the problem.

  can someone let me know what Miss me?

  Thank you

  1388a329-e0f1-473D-8b00-83cab52824ea wrote:

  Hello

  Thanks for your reply.

  can you please let me know what is the root cause?

  Thank you.

  Why do you need ODBC to connect to Oracle?

  Do you realize that I'm not standing behind you.

  I don't know what you post.

  Actually, you said similar to below.

  my car does not.

  Tell me how to move my car.

  You have not yet posted version or name of the operating system.

  ODBC is misconfigured.

  No one knows if you have error of commission (doing something wrong) or error of omission (not doing something that needs to be done).

  What kind of error do you have?

• Internal error: failed to get the path of the file directory common 64-bit

  Help!

  I had the worst time trying to figure what to change my path to the registry to resolve this problem. What I discovered Google, I need to change the path to my shared files, it is currently

  C:\Program Files (x 86) \Common Files\

  (I added the------because I read somewhere it was causing problems with facilities)

  I have this problem with some keys:(que toute aide serait grandement appreicated!) plants

  Thank you all

  This is part of what I have listed in the register-

  http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current.jpg

  That matches your entries?

  Your currently connected user name can navigate at this location and records open to the breast?  They can create a .txt file empty which are there?

  C:\Program Files (x 86) \Common Files

  Is your current user have read permissions for this registry key?

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  Finally what programs you are trying to install?  They are compatible with Windows 7?

• "internal error: failed assertion ' when exporting via LR4

  I've never had problems with Lightroom 3, just upgraded to Lightroom 4 and I can't export anything. I can also post either.

  Please use this TechNote to move your presets Lightroom 4: http://kb2.adobe.com/cps/928/cpsid_92891.html

• Internal error during an installation of Musicnotes Suite

  I'm about to install a product call Musicnotes Suite and I get an error message: internal error: failed to expand shell folder constant "userdocs."    Help, please!

  Hello

  I suggest you to check if the program is compatible with Windows vista, here is the link for compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Also check out this link:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• PROTL-16: internal error - stand-alone Installation of Grid Infrastructure

  Hello
  I am facing a problem when I run root.sh a stand-alone installation of grid (11.2.0.2) using Linux RHEL 5 Infrastructure.
  
  output of root.sh

  Creating trace directory
  PROTL-16: Internal Error
  Failed to create or upgrade OLR
  Failed to create or upgrade OLR at /u01/app/grid/product/11.2.0/grid/crs/install/crsconfig_lib.pm line 6740.
  /u01/app/grid/product/11.2.0/grid/perl/bin/perl -I/u01/app/grid/product/11.2.0/grid/perl/lib -I/u01/app/grid/product/11.2.0/grid/crs/install 
  /u01/app/grid/product/11.2.0/grid/crs/install/roothas.pl execution failed

  Clues?
  
  Thank you

  Hello

  Do to solve the problem.

  With the root user.

  chmod 755 /etc/oracle
  
  ### Deconfigure failed root.sh execution 
  
  $GRID_HOME/crs/install/roothas.pl -deinstall -force
  
  Re-run root.sh
  

  Kind regards
  Levi Pereira

• I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "E Yes

  I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "So even if Lightroom CC is installed, it will not launch.  What should I do to allow him to launch?

  I had the same problem, just bought a new Macbook Pro (June 2015) and Lightroom CC had this error as well.  Here is the dialog box that I've had with Adobe, and it cures the problem:

  Adobe: Please click on the search option in your Dock at the bottom of the screen.

  Adobe: Then click GO on the MenuBar at the top of the screen.

  Adobe:, and then click GO to folder, and then type: ~/Library/Application Support/Adobe /.

  Scott: OK, I did

  Adobe: Control-click on the folder and choose read information.

  Adobe: Expand the section sharing & permissions.

  Adobe: Click on + icon, and check if the administrator select

  Scott: OK, I chose the Admin

  Adobe: Give read and write to the Admini

  Scott: completed

  Adobe: Click the gear icon and select apply changes to included items

  Scott: OK

  Adobe: In the Finder window, click GO and select GO to folder

  Adobe: Type in
  Adobe: / Library/Application Support/Adobe/ and press enter

  Scott: completed

  Adobe: Control-click on the folder and choose read information

  Adobe: Expand the section sharing & permissions.

  Scott: ok

  Adobe: Give read and write permissions to all users

  Adobe: Then click on the sign + and add the rest of the users from the list

  Scott: completed

  Adobe: Now, please try to use the Lightroom from your computer.

  Scott: Thank you - it works!

  Hope this helps others.

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• Installation NOR Configuration Portable 4.7.0 failed with the following error Internal error 2203

  Dear reader,

  some advice please, I can't find someone else with a similar problem on the Forums or I'm looking in the wrong place.

  I'm having problems with installing an evaluation version of LabView 2010 64-bit on Windows 7 Lenovo ThinkPad laptop. I tried three attempts to install and uninstall and I get different messages each time. I run as administrator and insured that no other software is running, with partial success. I got to the stage where the application looks like it is running, but after a message "installation failed." So I don't know what are the underlying issues there might be if I have to evaluate, I suspect that the installation is corrupted.

  The Update Service indicates that there is an update, but the Service is in a loop where the bar past green to almost 90% and then again about 10%, with a frequency of once every 8 seconds or more. Looking at my traffic on the Internet, I do not see evidence of any updates being downloaded.

  I have attached a few screenshots, I can add a little more if needed / given the chance to. Files to trigger an internal error during installation vary. For example 124f989.ipi with-2147287035; 2aa73f. PIP with-2147287035; and a448f2.ipi.

  I've also seen error 1310 with 1becbcb.msi; etsoutenirles NI Logos XT, installation failure; 2 error: cannot perform action License Manager Updating OS Compatibility.

  At risk of key players away from what could be the cause but for purposes of completeness, note that the laptop power saving has been initially set at 15 minutes before sleeping, then perhaps there were a few download / partial of installation problems.

  Any suggestions regarding the best solution please?

  Thanks, Alex

  I don't know if you have one or two problems here.  But the problem with the update service seemed familiar.

  Take a look at this link.  I would try first, and if you are lucky, perhaps that other issues will disappear as well.

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• PC Backup doesn't work no-internal error: Server execution failed - error Code 0 x 80080005

  Hello

  I use Vista Business SP2.

  I'm having a problem with Windows complete PC Backup. When I click on the "create backup now" trying to create a full backup of the computer, spends about 15 seconds and then this message:
  
  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)
  Please check the configuration of your system and try again.
  
  I click on ok, and the message appears once more.

  I'm trying to save on the same disk external I used for backups. Backup of the files on this drive works fine.

  Here are a few things that may be useful to solve this problem:

  1. I recently uninstalled and tried to reinstall Sophos Anti-virus, but I can't reinstall.
  2. My computer has been restored using the backup of the computer in the past. I have not saved since.
  3. I recently changed the permissions/owner on the external hard drive that I support up to.

  Thanks in advance.

  If you have replaced TrustedIstaller with something else, which could very well be a part of the problem.  It is a user of the system and it can be called by the name of some programs and if she isn't here so the program does not know what to do.  I don't know how to solve this problem - I don't think add that a new administrator account to the user with this name will do (because it will have a different code).  In my view, that a re - install is the only way to solve this particular problem.

  Here is an article on the fixation of 4201 event viewer error: http://www.vistax64.com/tutorials/110886-event-viewer-error-4201-a.html but I wouldn't bother with this if you have an Installation of Windows Vista genuine disc.  Come back if this disc does not (and I don't think it will be necessary).

  CONGRATULATIONS on finding a disk for Installation of Windows Vista SP2 genuine - I guess that it's 32-bit (like your system).  It is exactly what you need - a commercial version.  The OEM versions do not work because they include device drivers specific to their computers and those who will hose your system unless they have exactly the same system for (and I don't think you can do an upgrade by using the OEM versions - at least not all of them - just a clean install {although I found a HP and it has used to update my XP system crashed then) ({I was waiting the disc of real update that I bought from Dell - not exactly kosher but finally in compliance}).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side (by copy and paste if necessary even if you can't use the full backup feature). If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install.  What version of Vista do you have currently?  I think that the drive will work with any version of Vista (they contain probably all versions on them and that they install is governed by the Code of the product used - but I have never actually tried using a different version of disc - I only heard this said by people who seem to know what they're talking about).  The fact that it is SP2 means that you won't have to uninstall all the Service packs that is even better.  I REALLY hope it works for you.  Make sure you use the UPGRADE option or you're going to do a clean install.  If the upgrade option is grayed out, it means that it will not work (but I don't think that this will be the case).

  If the drive works (and after installing all updates), then there should be nothing to fix on your system - it should work like new.  You should be able to do your backup with no error message.  Have no other problems.  This will fix the problem with TrustedInstaller so.  I feel confident thiis will work.

  I mentioned that Acronis because first of all, it's the best backup software and secondly because there could be a workaround, because it does seem like there was another solution because you do not want to delete this special software (but now that you have the disc - which is debatable – although it is still the best software {even though) ({, as you say, it's not free}).

  As far as Windows7 goes, I refer you to the Windows7 Forum at: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where the people who specialize in installation, the upgrade, and activation Windows7 will be more than happy to help you in the process.  I have Windows7 (my computer is not compatible and it is too costly to update since it's several components that need to be changed and my other computers are even older, so he has no hope here - I just have to wait until the "I need a new computer" but strikes me to new, but that will probably not for one or two years).  To be honest, I wouldn't intentionallly update at this point even if I could because I always wait a while before installing a new OS (generally up to the publication of its SP1 and in the case of Vista its SP2) to let other people work the new bugs - and there are some despite what you see in the ads.  Spend time on Windows7 forums, if you don't believe me.  Out of the box, she seems to be better than Vista did (which was awful) but there are still issues that need to be addressed - I'll wait instead until it is more stable (and a bit of my software is not compatible and I don't want to have to go out and buy all these updates at the same time (, because it will be too expensive overall).  But if you want to upgrade, which is perfectly fine - thousands of others do (always, especially since Vista has problems after all this time) and I totally understand.  This is just my own personal bias and procedure - I don't recommend to my clients that I recognize it as being just a personal preference rather than one-piece objective advice.  Before installing Windows7, make sure that your system is ready with the Windows7 Upgrade Advisor to: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx - you should perhaps update or remove some software and may not even need to upgrade certain hardware - better know before you start (especially if you go x 64 which I assume that your PC is able to treat - mine isn't).

  I hope this helps and wish you all the best in your effort to make the repair/improvement of the system.  I hope it works.  Remember that you must use your own product key to activate the software if necessary.  If it does not automatically have to activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that you had a problem and you need to reinstall the OS but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get error 'Failed to verify internal {no context}' when using the suite of flow

  Hey guys, I'm trying to get some layer flow using stream suite, but I get the error 'Failed to verify internal {no context}' on After Effects cc 2015. but the same code works fine on After Effects cs6. Here is my code,

  Value AEGP_TwoDVal;

  A_Err err = A_Err_NONE;

  Flow AEGP_StreamRefH = NULL;

  ERR (_suites-> StreamSuite4()-> AEGP_GetNewLayerStream (_plugin_id, layer, AEGP_LayerStream_ANCHORPOINT, & stream));

  Val AEGP_StreamValue2;

  AEGP_StreamValue2 * sample_val = & val;

  AEFX_CLR_STRUCT (Val);

  ERR (_suites-> StreamSuite4()-> AEGP_GetNewStreamValue (_plugin_id, flow, time_mode, time, ignore_expression, val)); 'failed to verify internal {no context}' on this line

  val.val.two_d.x = value.x;

  val.val.two_d.y = value.y;

  ERR (_suites-> StreamSuite4()-> AEGP_DisposeStreamValue (& val));

  ERR (_suites-> StreamSuite4()-> AEGP_DisposeStream (stream));

  And the error code is "A_Err_PARAMETER".

  But the code works fine on CS6. Did you guys ever faced this problem?

  Yes, I think that the problem of thread is the case. I move the whole EI to the idle hook, and now things work correctly!