Internet access computer looking for a dialup connection everytime I try to log

Similar Questions

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• Hang up my Internet Backgammon when looking for players, how to fix?

  When I start Microsoft Internet Backgammon he connects to the server and then he hangs up when "looking for other players. Just before that, I was playing asset stings on the Internet and I pushed a player and shortly after I was "disconnected". I don't have the error code. I then launched Microsoft Internet Backgammon and that's where problems began. I tried to turn on/off (uninstalling and reinstalling) this feature of Windows. I checked that my internet speed is enough (more than 56 Kbps, mine was 54 Mbit/s). I tried to renew my IP address. I even tried a system restore to an earlier time. Nothing seems to work. How to solve this problem?

  Hello

  Do you have an error message when it disconnects?

  Try to solve this problem with boot.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Everything to open a computer looking for OS store install Media for machines with license

  Looking for OS install media for computers with valid license. As a computer compaq laptop with the license on a sticker on the machine. I don't want to use pirated OS. How can I handle this.

  THX

  Hello

  You can buy Microsoft Windows genuine from the Microsoft Store. Link to the shop is given below.
  http://www.microsoftstore.com/store/msstore/DisplayHomePage

• Problem with Internet access: local only for wireless in Vista

  Help, please.  I have a Dell laptop and a Dell desktop computer.  The other day, I pressed WPS on my router Netgear wireless, and since then, my desktop computer (Windows Vista Home Premium SP2) was not able to connect to the Internet.  The office is connected to my router.  My Dell (Win 7 Pro) laptop is able to connect wirelessly to the router and Internet.

  That's what I tried:
  (1) I bought a new wireless router Netgear WNDR4500
  (2) I bought a cutting mini USB wifi adapter for the desktop.  Install the driver.
  (3) reset winsock, ipv4, ipv6, dns
  -netsh int ip reset reset.log
  -netsh winsock reset catalog

  ipconfig/flushdns

  (4) order McAfee firewall
  (5) restarted several times
  (6) persons with disabilities wired and wireless enabled - I get signal green/fort
  (7) off active and wired wireless
  None of the above seem to work.  I keep getting 'Access to local only' on both cables and wireless.  When I ping yahoo.com, I get no response.
  My laptop, however, works very well in the connection to the wireless router and also to the Internet.
  Anything else I can try?  Help, please!
  KT

  Hello

  Thanks for sharing the information valid.

  In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• no IPv6 internet access. Help me please to connect ipv6 internet.

  I have access to the internet for ipv4. but I want to use Home Group so bad, because I had a week ago from mobile. I tried to connect their collective housing, but I couldn't. I saw a post that ipv6 must be enabled using Home Group option. pls help me. With that, I'll post my IPCONFIG and IPCONFIG\ALL .
  
  Windows IP configuration

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  IPv6 address:: 192.168.1.3.
  Link-local IPv6 Address...: fe80::1d55:c10:946 has: 2087% 11
  IPv4 address...: 192.168.1.2.
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:9 d 38:953 c: 85e:cb1a:8f78:31bf
  Link-local IPv6 Address...: fe80::85e:cb1a:8f78:31bf % 14
  ... Default gateway. :

  Tunnel adapter isatap. {2EE3B391-631D-478A-9044-5B8C1E10914B}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  and IPCONFIG/ALL

  Windows IP configuration

  Name of the host...: Delta
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8168B/8111 Family PCI - E Gigab b
  It Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-1F-E2-65-50-D7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  IPv6 address:: 192.168.1.3 (Preferred)
  Address IPv6 local link...: fe80::1d55:c10:946 has: 2087% 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 16 August 2012 10:58:36
  End of the lease...: Sunday, August 19, 2012 10:58:36
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 234889186
  DHCPv6 DUID customer...: 00-01-00-01-17-6D-6F-12-00-1F-E2-65-50-D7

  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:9 d 38:953 c: 85e:cb1a:8f78:31bf (preferred
  EXEs)
  Address IPv6 local link...: fe80::85e:cb1a:8f78:31bf % 14 (Preferred)
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter isatap. {2EE3B391-631D-478A-9044-5B8C1E10914B}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hello

  1. what version of Windows is installed on both computers (32-bit or 64-bit)? http://support.Microsoft.com/kb/827218

  2. you are trying to create a group of houses from the desktop or the laptop?

  3. which edition of windows 7 is installed on both computers?

  4. what security software is installed on both computers?

  5. what position you mentioned earlier to use the home group?

  Here are the steps to turn on IPv6.

  1. right click on the network icon.

  2. Select Open the network and sharing Center.

  3. in the window that appears, select "change the map settings.

  4. in the network connections window, select the 'connection to the Local network' for the interface integrated NETWORK, then "Change settings of this connection" or file > properties.

  5. in the connection properties page, check the box 'Protocol Version 6 (TCP/IPv6) Internet'.

  Check out these articles.

  Open the troubleshooter group living: http://windows.microsoft.com/en-US/windows7/Open-the-HomeGroup-troubleshooter

  Why can't I join a home group?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Home group from end to end: http://windows.microsoft.com/en-us/windows7/help/homegroup-from-start-to-finish

  I hope this helps.

• Support: You are looking for an audio connection PC (TV: 32W2333)

  Hello

  I just bought a 32W2333 LED TV and I tried to connect my computer.

  I need to do with a monitor cable PC and I bougth the TV because I saw there a slot of PC connection (RGB/PC connector at the rear of the TV).

  But I was unable to find the sound input for this connection slot. The TV can receive the signal from the PC and view the screen of the PC at the same time?

  Thank you.

  Javier.

  I also recommend the HDMI connection since the port/cable HDMI provides audio and video signals, allowing you to enjoy audio and music through the TV speakers.

• HP bac App trash tries to install itself and thus cannot block my computer looking for a

  A file that does not exist:

  I have this app tray did not and do not know how it got on my computer but I need to get rid of him. Problem is that I can't.  It comes in a search.  Anyone know how to empty this trash please email [Personal Information deleted]

  Yes, some of this might work. I'll try it.

   

  Thank you

• When I am browsing the internet using Safari and I'm looking for something like a plumber he gives met with responses from an area not my own.  How can I change this?

  When I'm surfing the internet using Safari looking for a product (like a plumber) all my suggestions come from the vicinity of Tyler, Texas.  I live much closer to Dallas.  How can I change that.  Thank you!

  You have location services? Are you allowing access from Safari to your location? You must check in the settings > privacy > Location Services > Safari Web sites. If she knows exactly where you are, then you can get these errors.

  I'm sorry, I just realized that you were referring to the Mac computer. My answer was for an iPhone. I can't help you with the Mac.

• No Internet access after restart on Windows 7

  Hey,.

  I have a HP Pavilion Dv6 with an Atheros AR9285 wifi adapter and it originally had windows vista installed. I just upgraded to windows 7 is a complete and the first format was fine, I could connect to the internet. After restarting my computer, I started to have problems of WiFi, it says I am connected to my router, but the network is unknown and there is no internet access. I am able to connect to the internet on the same router using my phone, my samsung laptop and none of my roommates have had this problem.

  After much research on google and search through discussions, I found that a lot of people have had this problem, but none of their solution worked for me.

  That's what I tried:

  • I have uninstalled and reinstalled my network card
  • I've disabled Hello, then went as far as uninstalling itunes
  • I have reset the TCP/IP stack
  • I do not have Metacaff
  • I don't have the service # Id_string (bunch of numbers)
  • I put my default gateway at the same address as my samsung that connects to the internet
  • I put my IP as shown in the following solution addresses

  IP address of 192.168.1.65 (does not etre.65)

  Subnet mask: 255.255.255.0

  Default gateway: listed on the bottom of your router's default IP address (for me: 192.168.1.254)

  -Click OK

  I does not require a reboot, you may need to.

  Nothing seems to work, so any ideas would be much appreciated!

  Original title: unidentified network / no Internet access after don't Reboot under Windows 7

  Hello

  1 did you do changes on the computer before the show?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• motion of excessive hour glass; slow internet access

  After Dec 2013 Patch Tuesday, I got annoying cursor activity in Firefox26.0, thunderbird and even a low rated at firefox25.  This Windows 7 after Service Pack 1.  I searched on the net without success.  However, this does not happen with Chrome.  I went to that temporarily.

  I would like suggestions.
  Also, not sure when occurred (patch or before) but internet access is slow - several minutes to connect even if Wi - Fi is enabled.  Is there any error logs that I can check?
  Thank you, Jack

  Hi John,.

  Thanks for posting your question on the Microsoft Forum.

  1. could you please give us the number of the update that was installed afterwards, you are faced with this problem?

  Steps to read the kb article.

  1. click on start.

  2. type windows update in the search box.

  3. now click View installed update.

  4 find the number that has been installed recently.

  2. What is the brand and model of your computer?

  3 are you facing other problems outside internet access slow after installing updates?

  I suggest you follow the steps mentioned in the link and see if it helps:

  http://Windows.Microsoft.com/en-GB/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please answer back with more information, and the result of the proposed suggestion, we will be happy to help you further.

  Thank you.

• No Internet access under Windows 7 VM

  Hello, I am trying to connect to the internet via the virtual from Windows 7 computer but I am not able internet access. It indicates that all connections are made to the Local network connections. I have internet access in the other virtual machines but not windows 7. Any suggestions for what may be the problem?

  Follow the steps in http://windows.microsoft.com/en-US/windows7/Change-TCP-IP-settings to change the IPv4 settings.

  André

• My computer always seeks a wired connection, even if I don't have a dial-up or ethernet connection.

  When I want to connect to a public wireless network, I often have a cannot display page opinions, with the ability to diagnose connection problems.  When I followed these instructions, he still thinks that it connects to a wired connection.  My computer does not have even a modem.  Is there a way to set the default connection to a wireless connection?

  Hi DAWickR,

  Thanks for posting. What exact error that appeared leading you to believe that it is looking for a wired connection? There is no way to set a default network connection, but disabling the wired network adapter is fairly easy.

  To do this:

  1. click on the Start button.
  2 click on icon from your desktop and select Explorer.
  3. in the window on the left side, right-click my network places , and then select Properties.
  4. here, you should see your wireless and wired network adapters.
  5. right-click the wired adapter and select disable.
  6. to activate the card again, click on the same card and select enable.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Devices to file my EA6350 network daily 1-2, but internet access is maintained

  Devices on my network disappear every day. Internet access is maintained for computers, but I can't see the other devices on the network. Is there something I need to change in my settings? DHCP reservations affect this? The situation is very frustrating because I have to reset the router everytime I want to print something or access to the my web cam. Thanks in advance for any help. KF6YU

  I'm not sure of the term of the lease to No Limit. I suggest that make you reservation IP instead or contact the Linksys Support for assistance.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.