Problem with Internet access: local only for wireless in Vista

Similar Questions

• Problem with access: local only for wireless in Vista

  A few weeks ago, we got a new router at home. It works fine, but a few days ago, my computer suddenly could no longer access the internet wireless on this subject. (He had been able to before). Other computers in the House can use it for the wireless, and my computer can get on the internet by cable. My computer can also access wireless to other places, but not at home, and more.

  So far, I tried everything what I found on the internet to solve the problem without success. I tried:

  1. the solution proposed on this page http://support.microsoft.com/kb/928233.

  2. make sure that windows is completely updated.

  3 disable IPv6 and IPv4 (although not at the same time).

  4 turn off the power management feature that allows the computer to turn off the wireless card.

  5. disabling and re-enabling the network card.

  so far, nothing has worked. Can someone, please?

  Hello

  In most cases, this problem is created by the problem with wireless security.

  Try to connect with the security temporarily turned off.

  Or firewall blocking local traffic.

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Problems with internet access, troubleshooting, Windows 7 does not work.

  Hello, I have recently started up to Windows 7 on a partition of Windows 10, because a game wasn't working properly on Windows 10 system (has notified downgrade after a one hour session troubleshooting).

  I don't know if the game is causing these issues or anything else, but my internet connection goes away, even if the internet bar shows that it has internet.

  Right now, I'm typing this, it says I have a problem.

  

  Also, I have troubleshooted a lot of times, with the answer is:

  

  This happens at random, or whenever I join a game for Minecraft.

  Does anyone know the solution to this problem?

  Other images:

  

  Hello

  You can see the answer given by Arya S Asok by mentioning the problem with adapter or wireless access point

  Let us know how it goes.

  Kind regards

• Problem with Internet connection - connect only after you turn off allowing then again.

  It is a recent problem that unfortunately I have very little information on. In other words, after months be happy and connection to the internet when you start the computer has decided he won't d more, instead he wants to deactivate and then activate the connection to the local network before it will connect.

  There is no error message and the convenience store could not find that something wrong then directed me here! I tried to diagnose too but didn't know what was wrong either. There are two computers connected through a router and the other is fine, ISP technical support assures me it's nothing to do with them either.

  It left me speechless. I tried the system restore, I crossed the two diagnoses available in internet options and I called ISP support. Although this isn't a direct threatening problem, it's one of those little niggles you want just leave.

  If anyone has any ideas on how to fix things, I'd be grateful.

  * Acer Revo running Win 7.

  Hi tmaxwell83,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. What is the type of internet connection you use?

  This would happen if the NIC driver is corrupt or needs to be updated.

  I suggest that you install the updated drivers for the network adapter on the computer by visiting the network card or the computer manufacturer Web site, the check if it works fine.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with internet access point

  Hello, I saw that this question was asked before, but has never seen a solution to my problem, I will explain:

  I have like 5 months with this problem. I have a TP-LINK 300Mbps Wireless N Router, model No. TL-WR841ND. The fact is that when I plug in my router to the Modem, my wireless network seems to work fine, but when I try to connect to my computer or any other device to the network (mobile phones, playstation 3, tablets, etc.), I am unable to do so. On my laptop, I get the message: 'Problem with wireless adapter or access point', but the most confusing thing is that sometimes I can connect to the Internet via my network wireless without any problem.

  This time I decided to post my problem, because I'm tired of it. Sometimes it happens, sometimes it doesn't. Right now, I have two days without Internet connection (Via router), because my modem works properly.

  PS: I have another router (Linksys) and I can connect to this network, but I want to solve my problem with the TP-Link because the signal is stronger. Help!

  See links.

  How to install a TP-LINK wireless routers (Recommended)?

  http://www.TP-link.com/LK/article/?faqid=92

  Why can I not access the Internet after connecting the TP-LINK router to my modem.

  http://www.TP-link.com/LK/article/?faqid=138

  TP-Link FAQ.

  http://www.TP-link.com/LK/support/FAQ/?keywords=TL-WR841ND

• Problems accessing internet, access "Local only" our network connection

  I have a Compaq laptop (bought in 2008) under Vista Home Premium.  Recently, I was unable to connect to the internet.  The connection to the router is successful, but it says Local access only.

  Frustration, I re-charge the full operating system today.  No difference, unfortunately.  (And, now that the summer is reset, I don't have the updates of Windows, etc..).

  I tried a few things on the internet but you had no chance.

  Suggestions are appreciated!

  Thank you

  Lynne

  Hi, Lynne:

  If your laptop is a model of Atheros AR5007 wireless card try this update of the driver.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Continue to be "access: local only" on a laptop from windows vista Home premium.

  After about a year of just always connect with an Ethernet cable, I decided to solve the problem.

  First of all, I bought a new router and even a net-book with her. (net-book [windows 7] connected with ease), after a week of trying to get it to connect, I gave up.
  Second, I went through the trouble to find the recovery CD supplied with the laptop and restored to its default value of the plant. Despite this, it shows "access: local only.
  The system that I have a problem with is a Toshiba Satellite A135.
  Thanks in advance for anyone who can help you.

  The link below should help you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/fix-problem-local-only-when-connection-is-across-a/0949042d-074e-43ab-ba95-3c06cc2aa6be

• Adobe will open not downloaded aliant bell bills no problem with internet explorer, but I do not use it

  Adobe will open not downloaded aliant bell bills no problem with internet explorer, but I do not use it

  The current versions of Firefox have allowed a built-in PDF Viewer that has all of the features that other PDF as Adobe Reader readers have or can not work properly otherwise.

  You can change the action for Portable Document Format (PDF) to Preview in Firefox to use Adobe Reader software or set always ask in "Firefox > Options/Preferences > Applications.

  You can set the pref pdfjs.disabled true on the topic: config page to disable the build-in the PDF Viewer.
  
  You can also check the value of the plugin.disable_full_page_plugin_for_types pref and remove the part application/pdf, if any.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/view-PDF-files-Firefox-without-downloading-them

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.

• Where can I find as the screenshot I captured of a pop-up that is causing problems with Internet Explorer?

  I took a screen shot of a pop-up, so I me advise about this pop up, but now I can find it. Where can I find the screenshot? I looked in my documents as well as photos, but he isn't here? I need to find the screen shot to get help with it because I had big problems with Internet explore all day today and this pop-up started yesterday.

  Thanks for any help I can get.

  Linda

  Original title: screenshot

  I took a screen shot of a pop-up, so I me advise about this pop up, but now I can find it. Where can I find the screenshot? I looked in my documents as well as photos, but he isn't here? I need to find the screen shot to get help with it because I had big problems with Internet explore all day today and this pop-up started yesterday.

  Thanks for any help I can get.

  Linda

  Hi Linda

  Take a screenshot in Windows 7 requires several actions.

  1. press the Printscreen key. This operation copies an image of the screen to the Clipboard.

  2. open an imaging program such as MS Paint and paste the screenshot.

  3 save the screenshot image in a folder of your choice.

  Concerning

• Problem with the Access toolbar buttons

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hello

  Those who are not traditional icons they are symbols that belong to the Segoe UI police.

  See the following Web site for an excellent tutorial to solve this problem.

  [SOLVED] Unknown character or vertical Rectangles are appearing in place of metro icons in the Windows 8 start screen and login screen - tweaking with Vishal:

  http://www.askvg.com/fix-unknown-characters-or-vertical-rectangles-are-showing-in-place-of-Metro-icons-in-Windows-8-start-screen-and-login-screen/

  Let us know if it works for you.

  Concerning

• My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please

  My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please

  Hello

  Thank you for using https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html > and all the steps in "troubleshooting connectivity issues.

  If necessary, and for any other question, click on through http://helpx.adobe.com/contact.html and so "open" Please use the chat, I to can I part had the best experiences. An employee of Adobe Preran I quote: the chat button is enabled as soon as there is an available to help agent.

  Hans-Günter