Internet does not work after you set up parental controls.

Similar Questions

• Satellite L300-11V - Internet does not work after you remove software

  Hello

  Internet my brother no longer works. We believe that it is because he took off a bunch of software/programs to free up space.

  He said that the problem is
  ... "There are problems of hardware or driver with the network card"Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)"on this computer".

  Can someone please tell me how to solve this problem, or what to download?

  The laptop is a Toshiba Satellite L300D-11V

  Thank you

  Hey Buddy

  This error message is that you need to reinstall the driver for the network card. You can get this driver on Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you have installed the latest version of what the Internet should work again! :)

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  I downloaded the former driver of windows 7 touchscreen and it worked

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Cascades - Vertical alignment does not work after you add a higher container

  Hi all

  I am facing a problem with vertical alignment... Trying to play and to imagine a way to transfer my apps to BB10, I wanted to create a page layout and Center my components in the center of the screen. I created the necessary containers and things, it worked, but then, my baggage was obviously only in the center of the screen too.

  So I decided to add a top-level container that would hold only the background. But then, my content is not centered (in the container for the child). I do not understand why and I don't know I'm missing something.

  Here is the structure:

  {Page}
  content: container}
       
  layout: {StackLayout}
  }
  background: Color.create ("#555555")
  {Of container
  layout: {StackLayout}
  }
  horizontalAlignment: HorizontalAlignment.Fill
  verticalAlignment: VerticalAlignment.Center / / DOES NOT WORK
              
  {Of container
  horizontalAlignment: HorizontalAlignment.Fill
  layout: {DockLayout}
  }
  {Label
  text: "save location".
  horizontalAlignment: HorizontalAlignment.Left
  verticalAlignment: VerticalAlignment.Center
  textStyle {}
  Base: tsd1.style
  }
  }
  ToggleButton {}
  horizontalAlignment: HorizontalAlignment.Right
  }
  }

  Anyone have any idea on this? Is there a simple way to have centered on the content with a background full screen? I tried a lot of different ways, but none gave me the result I wanted (except setting a padding but that is not as I wanted).

  Thank you

  Add an empty container with spaceQuota 1 down. It will take all of the remaining space.

  Container {
    layoutProperties: StackLayoutProperties {
      spaceQuota: 1
    }
  }
  

  If you want to Center controls, adds another container empty in front of them.

  Also try to play with preferredWidth: Infinity / preferredHeight: Infinity and modes of different adjustment (filling or Center).

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Laptop does not work after you remove the virus win32/winfixer

  Original title: win32/winfixer

  I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

  Hello

  1. what exactly happens when you start on the desktop?

  2. you get any error message?

  3. is your laptop work fine in safe mode?

  4. What are you trying to download?

  5. How are you trying to download?

  6. What is the full error message do you get?

  7. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• S7-392: touchpad does not work after you connect an external mouse

  I plugged my Logitech Performance Mouse MX my S7-392 yesterday and since then the touchpad doesn't work anymore, not even when I disconnect the mouse. I used another front (wired) mouse, and there is no problem with touchpad. I tried to reinstall the driver from the Elantech touchpad, which did not help. Also started Windows in safe mode, but the touchpad still does not work. I'm on Windows 8.1. Maybe somebody has the same problem?

  Hello...

  On the top row of the keyboard, thr wil b a button with the symbol 'a helping hand on the touchpad. Locate this button (probably the 7 key). Press and hold down the FN key and then press this button. This wud help.

  Hope it works...

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• sound does not work after you reinstall

  Original title: I had to reinstall xp on my computer after doing so, I can not speaker working

  can anyone help, I can't get my speaker to work after reinstalling Windows xp, because they don't have any softwear with them

  Perhaps, you resorted to reinstall windows because your computer has become unstable because of a faulty hardware, such as a system driver or faulty hardware under sound.

  in all cases, you should try to re - install all software and hardware drivers on your computer directly from its place of origin.

  In addition, it is unclear if you do or you don't have a card its pci added to your motherboard at the moment.   But if you do, then you will need to re - install the software and drivers of its place of origin.

• LOV cascading does not work when you set the value of the parent LOV with DA

  Hi all

  Using APEX 4.2.2.

  I have tow LOVs

  LOV parent article is: P50_TYPE

  Child element LOV is: P50_PROJECT_ID

  In other words in the attributes of the element P50_PROJECT_ID, we have:

  > Cascade LOV Parent article (s): P50_TYPE

  > The items to show page: P50_TYPE

  > The list of values definition: something similar to:

  Select * from mytable where type =: P50_TYPE

  I use DA as run of the JS code to set the value of the P50_TYPE element

  something similar to:

  > $('#P50_TYPE').val (2);

  After doing this, the P50_PROJECT_ID element does not get updated when the P50_TYPE value changes. Namely, P50_PROJECT_ID remains empty, unless the end user manually changes the value of P50_TYPE.

  Any help please?

  Kind regards

  I had a similar experience, he expected a change event, so you can extend the jQuery to be included

  $('#P50_TYPE').val (2) .changes ();