Internet Explorer take s 10 minutes to load up

Similar Questions

• Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Hello

  I suggest you check out the link to Linksys support:

  http://homesupport.Cisco.com/en-us/support

• Backup of images in the error message: "Windows Internet Explorer: an attempt was made to load a program with an incorrect format.

  When you try to record images to the picture library, I get the message: "" Windows Internet Explorer: an attempt was made to load a program with an incorrect format. ""  I was able to record images before now without any problem.  Thank you!

  I tried your suggestions, but none seemed to fix my problems.  I was advised to remove the picture library, and then restore that brought me success.  Thanks for having me on the right path.

• Firefox takes two more minutes to load, the apparent clash with Norton Internet Security

  Today, I tried to start Firefox in the Norton Support menu, it took more than two minutes to load. After that, it takes two minutes during restarting. When he finally he directs all Web sites a quick clarification, with the exception of Norton, which is very slow or not at all. Three sessions with norton support cat have not improved anything, and after the troubleshoote of Firefox, including resettlement are not resolved either.

  I just finished a chat session with Norton who showed me where them exclude things Autoprotect and Firefox loads like greased lightning now. I enclose a document spirit a screenshot of the settings. Thank you for your support.

• The new 36.01 SW has not yet fixed the bug that makes firefox take over a minute to load.

  He started a week ago when v36 came out (and I did refresh)

  Hey, other users have reported that this problem has been caused and can be solved by adjusting the parameters of their norton running affected systems software: https://support.mozilla.org/en-US/questions/1048938#answer-696520

• Problems with Internet Explorer... Continues to stop.

  Send a message every two minutes that Internet Explorer closes down.

  While you wait for answers from the section of Internet Explorer, take a look at the following tutorials...

  Internet Explorer has stopped working

  Some tutorials for you to try:

  1 Internet Explorer does not start or stop responding
  http://support.Microsoft.com/kb/926449
  Note: It has an auto FixIt application. Use it.

  2. Internet Explorer Add - ons problem when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
  Note: there also an Fix It self.

  3. to resolve network connectivity problems in Internet Explorer
  http://support.Microsoft.com/kb/936211

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My preloader will not work in the latest version of Internet Explorer.

  I am designing a site for a friend who has just upgraded to the latest version of Internet Explorer. Now the preloader to load his site will not work, and it stops right on the number of '0 '. Here is the code I use. The code is displayed on the first keyframe and the site is on the second keyframe.

  Stop();

  Preloader

  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  function updatePreloader(evtObj:ProgressEvent):void

  {

  container for the progress of the site (download)

  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);

  preloader_txt. Text = % + '% ';

  If (p == 100) {}

  nextFrame();

  }

  }

  When my friend right click directly on the charger, it has the ability to 'play' flash and loads site. I would like to find a clean and elegant way to him load his site.

  
  

  I'm puzzled. Everyone knows about this problem? What I can do to fix this problem or should I right just a warning on the page?

  Thank you very much!
  

  Try to take a different approach (better) to preload...

  http://www.gotoandlearn.com/play.php?id=85

• Satellite L450D - Internet Explorer is slow

  TEMPRO VERSION V3. SATELLITE L450D.

  I bought this phone 5 days ago. It has windows 7 installed. My problem is in internet explorer, it is so slow to load web pages, what happens to expired. I have a router n high-performance belkin.

  Any help appreciated

  Have you tried another browser like Firefox? I prefer it because it s faster and you get a large number of useful modules.
  Check this box!

  If it doesn't work you have to upgrade your WLAN/LAN driver and disable your firewall. Also update your AntiVirus program.

• My icons on my desktop are missing and in the start menu, my files are missing (ie itunes) as "internet explore runs without any add ons.

  Last night my computer says something about a hard drive failure

  Hi Jazmin123,

  1. you remember to make changes to the computer, after which the issue started?

  2 are all the desktop icons and lack of start menu?

  3. what version of Internet Explorer is installed on the computer?

  4. do you see iTunes under installed programs? You are able to open iTunes in the program files directory navigation?

  Try the following steps:

  Step 1:

  Due to Internet Explorer, take a look at the link to the following article:

  Internet Explorer 8 will start in "no Add-ons" mode when you use the desktop icon to start Internet Explorer

  Internet Explorer Add-ons: frequently asked questions (Applicable to Windows XP)

  Step 2:

  If all the desktop icons are missing then try the steps from the following article link and check if that helps:

  Your desktop icons are missing in Windows XP

  I hope this helps. Can't wait to hear back on your part.

• Internet Explore 11 and Flash on Windows Server 2012 R2

  I used Windows Server 2012 R2, which built it contains Internet Explorer version 11.  During the loading of a web site that has content Flash he invites me to install Flash, but when I navigate to the Flash Download site it says that I must allow it because it is already installed.

  After reviewing the instructions for how to turn on the Flash, directions and not void because they do not match the screen I see.

  QUESTIONS RELATING TO THE:

  1. IE Version 11 has Flash built in or not?
  2. If If does, how can I turn on the Flash?
  3. If not, how to install Flash?

  Please don't tell me to load a multimedia web site and click on 'Manage Add-ons' and activate Flash because Flash enable command does not appear.

  Do you have to intall it? If this is not the case, go to Server Manager-> manage-> add roles and features-> Select here the server you want to install the feature on and under the User Interfaces and Infrastructure select Desktop experience. After installing restart your server functionality. After that, you should be able to view the flash in the browser.

  HTH

  Gavin...

• Acrobat PDF reader for Internet Explorer may be unloading/neoconservative custom plugin

  Hello

  My question is basically to understand what is happening in this situation, so that I can find out where is the problem and how to solve it.

  We used Acrobat 6.0 SDK to develop our custom plugin. This plugin is basically a wrapper for a few basic tools (note, stamp, text) etc... provided by Acrobat 6.0 SDK. We have also developed a PDFViewer.dll to display the PDF document in Internet Explorer. So when the user load the document on our Web site this PDFViewer loaded with custom plugin and allows the user to these tools.

  We install this plugin under < Acrobat X > /Plug_ins/ < company name > / MyPlugin.API.

  In our website, we give the list of the documents and when the user clicks on a document, it will load the PDFViewer and custom plugin. We are loading Acrobat.exe in advance so that we can load quickly.  Now, the problem occurs when the user open any other PDF in different tab or an instance of Internet explorer. ? How?

  Account for a user of internet Explorer connected to our web site, and then they can see we're going to say 10 documents. 1.PDF, 2.pdf, 3.pdf, etc...

  Now when the user select document 1.pdf we are loading that PDF in IE within our PDFViewer plugin with custom. (Here I saw that behind the scene Acrobat.exe is responsible in the transformed by using the Task Manager) / if right now if the user opens another instance of Internet Explore or another tab and open a PDF document, it opens PDF in the standard Adobe Reader PDF Viewer for Internet Explorer resides in (C:\Program Files\Common Files\Adobe\Acrobat\ActiveX).

  If at this moment, the user goes back to our site and tried to work on 1.pdf our custom plugin works fine, BUT if the user opens another document (say 2.pdf) the card no longer works basically looks like it is not loaded.

  This issue only happens if the user opens a document in another instance tab or internet Explorer and opens PDF which led to open Acrobat Activex for internet explore. If the user opens a PDF document alongside Internet explore it does not create any problem because at that time that ActiveX is not loaded.

  So my guess is that something happens when the ActiveX for PDF is loaded in Internet Explorer.

  I want to know more what is happening and why it's happening. Because of this behavior, the users of our web site cannot use any other web site that opens PDF documents because then they disconnect and reconnect our web site.

  Please we need immediate assistance.

  I'm open to provide more details with screen capture.

  Thank you

  Twinkle

  So you have Acrobat and Reader is installed on the same computer?

  What version of Adobe Acrobat is used?  Which version of Adobe Reader is involved?

  You don't mention what/how your PDFViewer.dll called Acrobat?  Can you comment more about it?

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Internet Explorer 9 does not load desktop H8 - 1080t

  I have a HP H8 - 1080t of office running Windows 7.  I was not able to run Internet Explorer 9 (installed at the factory) for several months. When you try to access with IE9, I'd get a blank white screen.   I've been using google chrome to access the internet.  I was on the phone yesterday with a HP representative for 2 hours and 20 minutes to try to solve this problem, without success.  The given solution was perhaps my IE 9 has been corrupted and maybe I need to do a system restore to factory settings. If I do a system restore and the software is damaged, will not yet be corrupted after restoring?  Please, is there another alternative.  We tried IE9 deleting and reinstalling without success.  Now when I try to load IE9, nothing happens. My icon just flashes. Help! PLEASE, I BEG YOU.  Thank you.

  We tried the Windows Update yesterday, but I'll try one more time before making a recovery.

• .HTML does not load in Internet Explorer

  I have DLd among those free Flash templates. http://www.flash-templates-today.com.   It opens fine in my Flash CS4 and plays the swf perfectly. However, when I publish the .html, it opens in Internet Explorer but remains on the first frame of the preload.    ".. 0% of loading.    A noise occurs to tell me that I must allow Active X, which I do, but the HTML never play forward or end the preload. Here is a screenshot of the ACE on frame 1. Any help would be appreciated. Gene TY

  http://screencast.com/t/ZmE3MzBmM

  TY Kglad so. It was my first time to download on the server and it seems to work pretty well. TX again.

  You are welcome.

  Also, do you have an opinion on my next problem. This site, like the East, takes about 25 seconds to load. I have 8 .jpgs in the Gallery, and they average 50 KB a piece.  I also used about 6 pictures in my library that were HUGE, but I turned (transform tool) them to the size I needed. This hurts me to use this method instead of re import the photo image of reduced size to use in various pages (not the photo gallery).

  Yes.

  Or is - this NOT important since Flash will reduce them as it exports the swf file?

  This is important.  You should re-import images resized to save swf kb.

  Also, I see the action "compact and save" in the file menu. I should do? This is what helps to reduce the file size and faster loading?

  Compact and save resizes your fla file (if you have deleted library items, for example), not your swf.

  My .swf is 4000KB. Is - too big? Here is a link to the site if you choose to watch. www.eddievasquezelectric.com

  It is large, but not necessarily too large.  Certainly a preloader, however.

  Also, I see that I can publish an index.html off Flash directly and then use this index page to send to the server. However, index WHICH was justified to the right, page had a margin around it and a black background. It looked very ugly, but it WORKED. I decided to leave my Dreamweaver CS4 and I have started a page and imported swf file. I used my VERY limited knowledge of DW to adjust the background, margin, and centering. I managed, but operates in the dark. I then used Filezilla to charge and what you see is the result. Has used the methodology appropriate here? Any opinions would be greatly appreciated. Gene TY

  I don't use, so I'm not a good person to opine on this dw.  I started using dw there are many versions and had trouble with a page just like I wanted.  so, I've learned html and have always coded my html files in a text editor.

  If your flash works well with all browsers in your dw html page, leave it alone.  But what I see in the flash forums, looks like a lot of people are struggling with a browser or another when you use a dw generatred html file to integrate flash.

  p.s. Please mark this thread as answered, if you can.

• Flash animation does not correctly load in Internet Explorer only

  I have a simple flash animation which through text and pictures. I have a (AS3) preloader on frame 1, which sends the playhead to the frame 2, once the film is loaded 100%. For some reason, in Internet Explorer, the preloader bar will load completely, but fail to move the playhead to the frame 2, so it will just stay here with prestressing bar to 100%. However, this does not happen every time. For example, at the present time, the flash animation will play when I initially on the site, but when I click on another page, the same flash header (same swf on each page) just goes to show the preloader bar but will not play the rest of the film. Didn't help not reload the page. Close the browser and reopen it don't help. Clearing the cache of the browser did not help either. Thus, the flash animation will play correctly on the first page of the site I'm going to (be it the home page or another page) but then when I go to any other page that has flash animation, he won't play, he's there with the preloader bar showing. And then when to return to the original page, I entered the site, the flash movie play there anymore, either. I have not seen this problem in another browser than Internet Explorer (6 and 7). I checked in Firefox on Mac and PC and Safari on Mac. I use flash player 10.0.22.87 on my Mac and PC. The flash animation was made in Flash CS3, flash player 9, actionscript code 3.

  So to see the problem, here in Internet Explorer: http://demo.matthewpavkov.com/adairsolar . Wait for the movie to load and start playing. This works. Then go to one of the other pages and you will see that the same swf will not play. Go to the homepage, the swf file does not play.

  Here is the preloader code:

  import flash.display.*;
  this.stop();
  
  this.loaderInfo.addEventListener(ProgressEvent.PROGRESS, PL_LOADING);
  
  function PL_LOADING(event:ProgressEvent):void {
      var pcent:Number=event.bytesLoaded/event.bytesTotal*100;
      lbar.scaleX=pcent/100;
      lpc.text=int(pcent)+"%";
      if (pcent>=100) {
          this.gotoAndStop(2);
      }
  }
  

  , If I remove the preloader ActionScript flash animation plays correctly. You can see it here: http://demo.matthewpavkov.com/adairsolar/no-preload

  The .fla is available for those who want to take a closer look.

  mjjp,

  Can just that in IE, the ProgressEvent never triggers - because your content is already cached.  See what happens if you add the following lines again (end of the sample code):

  this.stop();
  
  this.loaderInfo.addEventListener(  ProgressEvent.PROGRESS, PL_LOADING);function PL_LOADING(event:ProgressEvent):void {  var pcent:Number=event.bytesLoaded/event.bytesTotal*100;  lbar.scaleX=pcent/100;  lpc.text=int(pcent)+"%";  if (pcent>=100) {    this.gotoAndStop(2);  }}if (this.loaderInfo.bytesLoaded >= this.loaderInfo.bytesTotal) {  this.gotoAndStop(2);}
  

  See what's happening?  In this way, even the Manager ProgressEvent never triggers, you always compare the bytesLoaded, bytesTotal property property.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."