Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

Similar Questions

• Firefox takes two more minutes to load, the apparent clash with Norton Internet Security

  Today, I tried to start Firefox in the Norton Support menu, it took more than two minutes to load. After that, it takes two minutes during restarting. When he finally he directs all Web sites a quick clarification, with the exception of Norton, which is very slow or not at all. Three sessions with norton support cat have not improved anything, and after the troubleshoote of Firefox, including resettlement are not resolved either.

  I just finished a chat session with Norton who showed me where them exclude things Autoprotect and Firefox loads like greased lightning now. I enclose a document spirit a screenshot of the settings. Thank you for your support.

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• Internet Explorer take s 10 minutes to load up

  When I first turn my computer on the internet explore takes about 10 minutes to load until I can go on the internet

  When it worked before?

  If you can go online, try to download Superantispyware free superantispyware.com and run a spy software on the pc and see if there is any possible infection.

  Also try to reset the options of Internet Explorer from the Control Panel, network and Internet, Internet Options (vista) or control panel connections network and Internet, Internet Options when the window opens go to the Advanced tab and click on reset and put it back again and wait, click close and restart the pc.

  See if it works.

• How you stay connected on my accounts on sites like reddit and gmail? I changed my settings to allow cookies, but I still need to login each time.

  How you stay connected on my accounts on sites like reddit and gmail? I changed my settings to allow cookies, but I still need to login each time.

  Websites to remember you and automatically log you in are stored in a cookie.

  • Create a cookie exception permit to keep such cookies, especially for sites Web secure and if the cookies expire when Firefox is closed.
  • Tools > Options > privacy > Cookies: Exceptions

  In case you use "clear history of Firefox closing:

  • do not delete Cookies
  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception to allow.

• Don't understand why can't listen to videos on the web sites ie HULU and ads. Using Vista + Adobe Flash player.

  Don't understand why can't listen to videos on the web sites ie HULU and ads. Using Vista + Adobe Flash player

   

  Hello

  1. what happens when you try to play videos on the mentioned website?

  2. you use Internet Explorer browser to play videos on the mentioned website? If so, which version?

  3. are you able to play videos on other websites like YouTube, etc?

   

  See the following article: If you use the Internet Explorer browser.

  The video problems when you use Internet Explorer:

  http://support.Microsoft.com/kb/2532294

• Hello. Why have I not once the upgrade has changed the menu in Russian?

  Hello. Why have I not once the upgrade has changed the menu in Russian? I want the English as I had initially. The menu has only Russian. What should do?

  Photoshop CC2015

  Cloud creation help / solve the installation language. Creative Cloud applications. CCM-

  http://helpx.Adobe.com/creative-cloud/KB/change-installed-language.html

• Windows 7 takes a long time to load the desktop after login

  Hello

  I am using windows 7 on my HP 530 laptop. My friend who installed and activated, but I think that it has installed the cracked version. After installation, it was really perfect. but after a while when I connected to the internet, some updates have been installed, and then when I logged in the windows, he invites me that you are using a pirated version or something like that (I don't know more actually). then I restored to my previous state and then everything was fine. After that I stopped the automatic updates, but these days my startup window is having a few problems. After entering the password, its taking a long time to load the office and its keep on the list "loading, please wait...". »

  I'm so sick of that, also, I have to restart my laptop by pressing the power button, and after the reboot, it works fine. But I need someone to answerwhy its taking a long time to load the desktop...?

  Also, please give me some advice to solve this problem, keep this idea in mind that my computer is virus free and got a good processor and RAM. I installed my windows in the C drive, and in my C drive only almost 2 GB of space is left (or almost). and there is no program running auto in msconfig, other than gtalk, Skype, etc.

  I'll be really grateful if someone please give me the solution.

  HP would have provided your preinstalled laptop with win, they would also have provided a way to recover your laptop to the specifications of the factory, either through discs of recovery or a hidden restore partition that you need to access in order to make recovery disks. How do you access a recovery partition is an option of HP, is not dealing with a MS - visit the HP website, specific to your model for more details on how.

  If an illegal win7 version has been installed, or you have to buy version of win7 you need, or you need to recover your laptop provided that the factory provided, by doing so, you lose everything on the phone, if you have lost or that you can not do the restore cd and then telephone HP support they would usually provide records for a small fee.

• Firefox 7 takes a long time to load the first web page.

  After I have connected to my Windows XP SP3 laptop, it must time for Windows to finish loading and explorer.exe to become sensitive and let the start menu.

  Once the start menu works, I start Firefox, which opens, and it loads the tabs that were last open, which is correct, but it is there and turns his wheels for about 2 minutes, doing nothing except showing the hour glass icon and research as it tries to load the Web page, but no status messages appear in the status bar.

  Why does it is spinning its wheels and do nothing so long?

  I have 2 extensions and active 1 plugin:

  Extensions:
  User Agent Switcher 0.7.3
  Add to Amazon Wish List button 1.7

  Plugins:
  Shockwave Flash 10.3.183.10

  See you soon.

  Also these?

  Java Quick Starter 1.0 false [email protected]
  Microsoft .NET Framework Assistant 0.0.0 false
  

• Vista symptom-was unable to connect-event log unav... - error-could not load the dll of the firewall intall cd

  Hello, once again!-the permanent problem's for a while when the system starts at length made a chkdsc solve problem of security and started a journal rewrote the security set of default computer files (it happened before I could do anything and I have prior devulcanization, but is not this time), then narrowed office and failure to connect to a service windows appeared - are looking for Event Viewer , he is too error-unavailable check running - and the same.etc wall of fire etc. I ran the chkdsk again and I tried clean boot, reinstall os from cd to find any DLLs cannot be read, all with no success. The system configuration was last place, I was in (memory and forgotten the reason) but placed in this area has been the recommendation at the time to fix something and rebooted to undo changes and that's where newspapers changed. My user profile is also something questionable-. Fixed UAC from the Office to the previous, but the sidebar does not work. I'm sure there is a way to get back to that, but I can not see where or how--to help. (this just before a full backup has been in do so) sys restore is never out anything here. I don't have a picture from earlier and that you would like to know the number of license/registration even if other images uploaded to a new os and numbers is a question they compete somehow.eg P2V on a different HARD drive. Thank you. Oh... a program compatible for xp had red warnings about its pilots and it was loaded and uninstalled just before all this. (MSI tv tuner USB pvr)

  Hi 1 year perateth.

  In order to solve the problem, I would suggest that you backup the data present on the system then format the hard drive and reinstall Windows Vista.

  Note: In a new installation, existing data on your computer are deleted. These data include data personal, settings, information about the hardware and software drivers. After installing the operating system, you must also reinstall all programs. Make sure that you back up data personal disks or other external storage devices before you perform a new installation.

  You can check the following items to install Windows Vista.

  Installation and reinstallation of Windows Vista

  Formatting disks and drives

  Hope this information is useful.

• Firefox will not connect to any Web site. Chrome and IE work fine.

  I use Firefox as my main browser for years without any problem. A couple of days without reason apparent, is no longer connected to ANY Web site. The tab displays indefinitely 'connection '.... "with the circle of rotation. I can use IE and Chrome without any problem. I rechecked the Options-> advanced-> connection to the proxy settings and tried all options but nothing helped. I also started using the safe and still nothing. Also tried uninstalling and reinstalling several times. I'm on version 42.0

  Surely, there must be a way to debug this to understand.

  I use another firewall, so I don't know how operation windows.
  I called the big players to help you. Good luck.

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select network.
  Search for configure how Firefox connects and then press the settings button.
  If you use a proxy server, make sure that these settings are correct. If there is no
  proxy, first use No. Proxy. If there is a problem, then try Proxy system.

• setting the time & date on the router or Web site atomic time (to synchronize times)

  Is there a program that will perform the same function as this file control breaks:
  NET TIME \\[local pc name or an ip] / set yes

  But instead of the parameter to another pc on your network will put it to your router (Cisco Linksys WRT110 in my case) or an atomic clock Web site?

  I know VB, I can write my a program to do? If so, what would be the code to remove this date & time of my router or a Web site?

  Time Windows synchronizes on a time server NTP [S].

  The sequence of commands that I used in the past (as admin) is:
  NET time /setsntp:192.168.1.1
  w32tm/config /update
  w32tm/Resync /rediscover

  Where "192.168.1.1" is replaced by the time server NTP which synchronize you to.
  Not sure if the Linksys routers include a SNTP server.

  Microsoft replacement instructions are here:

  "How to configure a time server authoritative in Windows XP"
    <>http://support.Microsoft.com/kb/314054 >
  Jump to halfway down to the paragraph "the time service Configuration Windows to use an external time source.

  HTH,
  JW

• I recently updated my computer (the thing has changed since the problem) and now my LAN is enabled at startup, even if I turn it off before you stop. Why? And how can I stop this?

  Since my last update, that is the only thing changed on my computer since it began, my lan port is always on at the start of Vista (Ultimate).   I'm on a laptop that has a LAN on board.  I have not had this problem NEVER before and have owned the laptop for about two years now.    The only thing that has changed on the computer's windows updates.

  I spent the length of a deactivation of the adapter before you turn off the laptop and tried to load a page that is not in the temporary memory, and get the usual page cannot be displayed.  I scanned for virus using AVG and Bell Internet Security scanner online McAfee.   I also ran Windows MSRT and found nothing unusual.   I also checked to see if the BIOS has been changed somehow, and nothing has changed.   Boot to LAN is disabled.   So I can only conclude that I have a virus has not been detected (but have no slowdowns or anything different in the security under gpedit.msc logs), or the more recent Windows Update changed some settings.

  But weak and this is every time I start up the computer from the local network is enabled.   If I let the cable disconnected at startup, it does not reconnect to the modem cable after rehabilitation and I have to disable and then re-enable the LAN to access the internet.

  Please let me know if anyone else has this problem or have heard of this and know a solution.

  Thank you.

  Leqs D.

  Hi Lequarius,

  ·          You receive an error message when you restart?

  Method 1

  I suggest that you download and install the updated drivers for the network adapter on the computer by visiting the card manufacturer or computer manufacturer website manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I would suggest that temporary you disable the security software installed on the computer and check if the problem persists.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

• After sending an efax, how can I get a hard copy that the fax has been sent? cc = us

  1. product name: Photosmart 7510

  2. operating system: Windows 7 Home Premium

  3 Error Message: No.

  4. the changes made to the system before the problem has occurred: no

  After sending an efax, please submit instructions on how to copy a paper reflecting the date and time that the fax was sent. Thank you.

  What you can do after wearing the efax menu on the printer display panel, press the icon

  "Settings". From there you can turn on delivery confirmation. This function will display a page that contains information such as the completion date and time for the number of attempts to send the fax, the fax and the number it was sent to. It should look like this:

  

• FlashGot suddenly causes FF hang after closing. Takes about a minute to stop the execution. Why?

  During 2 days, I noticed that FF does not close the output. The process continues to run for about a minute, using up to 100% of my resources. After the suite Mozilla troubleshooting guide, I found the culprit to be Flashgot. I can run ALL my extensions and plug-ins and don't have this problem. But at the point where I have activate Flashgot, this problem occurs. What is strange is that I've been running FF and Flashgot for a year with no problems. Even after updating both versions the latest, everything was fine. It was only a problem in the last 2 days. In addition, exactly the same thing is happening on my wife's Office, as well. Once again, that in the last 2 days. I tried uninstall/reinstall the two FF and Flashgot, but to no avail. What is going on?

  Create a new profile and delete the old one seemed to solve the problem. Why the problem occurred in the first place is beyond me. But after creating the new profile, restore all my favorites and reinstall Flashgot, everything seems to be a behavior wonderfully. For anyone else having similar problems, I recommend that you create the new profile. It is easy to do, as long as you save your old, then you can copy all of the files required to restore your preferences and bookmarks.