Internet OK wireless access in public libraries, but not at home with Telus V1000H

Similar Questions

• G560 wireless connects to other networks, but not my home network

  Hello

  Got the 560 yesterday and set up was smooth. First thing I did was try to connect to my home wireless network, but it wouldn't connect. I checked the network password several times but it doesn't connect at all.

  All my other devices at home can always connect to my network. And the 560 connects to the network of my neighbour without problem.

  So I think that this is not a problem with the radio doesn't work.

  Tried to restart the connectivity and the computer several times, but has not made a difference. Does not resemble ReadyComm is installed on my machine.

  Someone had this problem? Is there anything I can try?

  FYI my home router is Netgear and is set up with WPA - PSK.

  Thank you.

  Update:

  Discovered the Atheros drivers were from 2009. Looked around the internet and found a newer version (although not later).

  Updated the drivers manually and its working fine now.

  PS: The pilot of the lenovo Web site download section is horrible... awful.

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• Toshiba Satellite A665D-S5175... wireless works fine on AC, but not on battery

  Satellite A665D-S5175... I loaded windows 8 preview... I was really in LOVE... Afterwards, I had to reformat back to the original "out of the box" due to windows 8 not to recognize seagate hard drive (even if the compatibility check does not list)... Since then my wireless internet works fine when on the current but will not work on battery... my battery works fine and wireless works fine on all my other wireless devices... can't help but to think it's some type option to power supply but I can't find it to save my life... Help! Toshiba wants to much $$ to ask me this? their staff... I don't HAVE a big $$$ LOL! Thanks to anyone who can shed some light on this...

  Hello

  Change the power setting on default battery for the wireless network adapter. Configure the wireless network adapter to use the maximum performance setting when Windows Vista or Windows 7 is configured to use the balanced power plan or the power saver Power plan. To do this, follow these steps:
  1. click on start
  2 type Power Options in the start search box, and then click Power Options in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. click on change settings for the plan under the management of the diet that is selected. For example, if the balance is selected, click on change settings under balanced plan.
  4. click on change advanced power settings.
  5. in the Power Options dialog box, expand wireless adapter settings, and then power saving Mode.
  6. in the list that appears next to a pile, click performance, and then click OK.
  For more information, see the link.
  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point
  http://support.Microsoft.com/kb/928152

• I can't get on my hotmail account - internet connects to all other Web sites, but not Hotmail. Any ideas?

  I got in trouble for the week when you log in to my hotmail account. Internet connects to all other sites Web but Hotmail. You have any suggestions to solve this problem. It's really annoying. Thanks adrienne

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• WRT54G - Internet connectivity failure - everything seems to work, but not online

  I have a WRT54G V8 router, who is 18 months old. Its used by 3 laptops to connect to the Internet (Wi - Fi all). All 3 laptops unable to connect all of a sudden. Steps are taken to solve the problems, still no luck. Please suggest if something else can be done.

  1. first test was to remove the router and connect a computer directly to the modem via a LAN comcast cable. Internet is available

  2. I have hard reset the router and configured again. No luck

  3. check the connectivity to the Internet through ports 1 to 4, no luck

  4. I can see the available signal and connect to the network, but not internet connection. I see the cell as shown (all dynamic) IP address obtaining

  5. I upgraded the firmaware to 8.0.6 version and and not set up once again, no luck (same as step 3 & 4)

  6. removed the WEP security, does not

  7 soft reset on the router (via the admin page reset to factory settings), no luck

  LED status

  Power - on and yellow

  Cisco - on

  WAN - SUITE

  Internet - ON and flashing

  Lights of port - when a laptop is CONNECTED

  I see the excellent signal strength and all laptops can connect to the network, but cannot go online. Google chrome shows a message hosting "solve" until timeout. Laptops show a 192.168.1.XX IP address. 4 ports are also not connect to Internet (mobile one GETS IP address via the ports as well)

  I have no other options left. I've seen a similar thread here (http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2288), but no response. Please suggest what to do next.

  Okey, I finally found the problem. His Modem.

  Router is not able to get the IP address of the modem if the modem is started first and then I plug the internet cable to the router. But if I keep the router and modem connected and then reset the modem while keeping the router powered on, the router receives an IP address.

  And in both cases, if I connect the laptop with the modem directly, computer laptop can connect to the Internet.

  I bought a new router (WRT54G2) thinks that the problem is with the router, and I can reproduce the same behavior with both routers constantly.

  Make sure you modem is Motorola surf.

• Restrict access to the PROD, but not DR.

  I use version 11.2.0.3.0 Production. I have questions.

  1 Prod DB is frequently asked by developers and QA guy with intensive queries of resources resulting in production down? So we intend to restrict access to these users of prod and don't give access to functional users. And for the developer/qa guys, give them access to Dr. (stand-by). So, how do I restrict user to prod but not the doctor (copy of Prod), how can this be achieved? Or any other way to do this?

  2. our production DBAs, complain that they are facing a problem (mighyt be performance related) because of sessions connected for long hours with the inactive state of developer/qa people. But my understanding was, he simply eats low memory (much lower), but will not set any CPU load, so need advice of experts, how session idle could cause problem?

  Use of theSERVER_HOST environment variable.

  See SYS_CONTEXT in the doc of the SQL language.

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions184.htm

  The host name of the computer on which the instance is running.

  SELECT SYS_CONTEXT (' USERENV', 'SERVER_HOST' ') FROM DUAL;

• HP Officejet 4500 G510n-z Wireless connection print Windows Vista, but not from Windows 7

  Printer HP Officejet 4500 G510n-z seems to be connected to my Dell laptop with Windows 7 on HP Solution Center page, but does not print. Documents just get stuck in QC. It was printing then it wasn't so that's when it wasn't. The printer works when I print from a laptop more old Vista. The last time this happened, I uninstalled and reinstalled the HP software and that doesn't seem to help. Then, for some inexplicable reason, impression began to work. It has now stopped working again. I can scan the Windows 7 laptop but not print. I tried all the troubleshooting tools that I could find without success. Thanks for trying to help.

  Hello-

  It could be caused by a couple of things:

  1. firewall on PC or router.

  2 interference (microwave, cordless phone base @ 2.4 Ghz)

  3 distance from router

  4 corrupted printer driver.

  Turn off the firewall you have and you move anything that can cause interference to router.

  If none of the above solves the problem, I'll have to install a different printer driver.

  Click Start.

  Go to devices and printers.

  Click Add a printer.

  Add a local printer. Create a new Port, then choose "Standard TCP/IP port.

  Click Next.

  TypeRegeditdans in the box 192.168.1.12 IP address or host name. (uncheck the box 'Interrogate the printer')

  Click Next.

  When the printer list opens, click windows update. (it takes a few minutes)

  After the box appears, choose HP (not Hewlett Packard) on the left and choose "Deskjet 990c" on the right.

  Click Next, the default value and end.

  Try to print using the printer Deskjet 990c.

• Laptop detects the neighbouring network but not my home network?

  My problem is the following...

  My Hp Pavilion dv4 1225dx Vista SP1 computer laptop works very well on our router WRT160, computer laptop Dell Inspiron 8600 XP SP2 from husbands can detect the neighbouring network but not ours. Any suggestions, I searched the forums for answers with no luck.  Thanks in advance!

  Change the channel and SSID or.

• Cannot resolve IP # so unable to connect to the internet on my laptop. Can diagnose, but not repair. Why?

  I have windows xp on the desktop & windows vista on computer dell laptop. For some reason unable to connect to internet on laptop, I took it on vacation.  I wasn't able to get on the internet for 2 weeks at the home of parents therefore had to use his laptop with his internet connection.  I have locked up something on my own.  Office IP #192.168.1.1 but phone's IP #192.168.1.0. What can I do? Thank you

  Hello Bamzplaces,

  Thanks for posting in the Microsoft Answers forum! The IP address of your laptop must be assigned by DHCP through your router. Proceed as follows to make sure that your laptop computer to obtain an IP address automatically:

  ·          Open network and sharing Center via Control Panel or by double-clicking on network control and select Properties.

  ·          Click on to view the status of

  ·          Click on Properties

  ·          When Windows asks your permission to continue, click continue .

  ·          Select Internet Protocol Version 4 (TCP/IPv4) , and then click Properties

  ·          Verify that the obtain an IP address automatically and DNS server obtain an address automatically are selected.

  ·          Follow the same steps for the connection of your Internet Version 6 (TCP/IPv4) Protocol

  ·          Click OK and exit to the desktop.

  I would then recycle your adapter to disconnect manually for 10 to 20 seconds and then reconnect. Your connection once we connected is displayed, try to connect to the internet.

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• JavaScript must be enabled when you access certain Web sites, but not on others

  When I go to some sites Firefox Web allows Javascript to run. On the other is not what causes not to display menus and site access account to see 0000. I updated the Javascript code to the latest version and went the subject: config to make sure that the toggle Javascript is enabled. I am running Firefox version 26. How do you know that if javascript is enabled for a particular site and how I turn it back on for Web sites where it is turned off.

  I finally found the problem. I have a program call Adguard that blocks pop-up windows. When I disable the program sites is displayed correctly. I sent Adguard to see how to adjust their program to fix the problem.

• HP Laser Jet 200 MFP: HP Laser Jet 200 prints wireless, scans of the printer, but not scan to the computer

  I can print wireless from my computer.   I can directly scan from my printer for paper output.   What I can't do is to scan from my computer (IE Word, HP SCAN...) in a document.    I was able to do a few weeks ago and know nothing of this happned to make change.

  Hey @AnnieCTX,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the problem that you experience when you try to scan wireless since your color HP LaserJet Pro 200 M276nw MFP to your computer Windows 8.1. There are a few different things that can cause conflicts sweeping. There may be one occurring problem of connectivity, software, or between your computer and your printer driver. Therefore, when first troubleshooting I have to run the HP print and scan of the doctor tool. This tool will help us identify the problem and fix this scan. Can I please you follow the steps below.

  Can I have it please click here to download and run the HP print and scan of the doctor tool. This tool will run on your computer and 'set scan' questions for you. If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test scan using the HP scanning software to confirm if the problem is resolved.

  The issue of digitisation should persist, can you please clarify exactly what happens when you try to scan via the HP scanning software (error message, nothing opens, etc.)?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Access to ad groups, but not to users

  Hi all

  Users and groups are kept in separate OUS in our Active Directory.

  It seems that vCenter Server accesses only the OU with the group, so I can only assign rights VM to groups.

  Is there any solution to access more then an ORGANIZATIONAL unit in the ad?

  Thanks in advance,

  Andreas

  Hello

  VC does not access a single ORGANIZATIONAL unit. To do this, a query ldap for all users and groups. So, it could be a permissions problem.

  The user starts the service VC cannot have the read permissions in the ORGANIZATIONAL unit in which your groups are located. ?

  Have you tried to search in the permission 'assign '?

  Lars Liljeroth

  -