Internet TV missing from Windows 7 Media Center

Similar Questions

• Windows xp Media Center from windows xp media center for windows 7

  I have windows xp media center 11.  I need to have windows 7 to be able to configure the USB tv tuner to record/watch tv programs

  Hi Bevtravel,

  Windows Media Center on Windows XP, like Windows 7, can use external USB TV Tuner to watch/record TV. Make sure that external USB TV Tuner is compatible with the version of Windows Media Center that you have on your computer (2002, 2003, 2004, 2005, etc.).

  Access the link to learn more about recording TV in Media Center.

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/record-TV/default.aspx

  Besides the link above, you can also access the following link to see what all is possible in Windows XP Media Center against Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/products/compare?T1=tab20

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP entertainment center z558 - upgrading to windows 7 from windows xp Media Center.

  When booting with the Windows XP Media Center operating system on z558 Entertainment Center, before the display on the unit's "WELCOME to HP ENTERTAINMENT CENTER" scrolled to show a constant 'TIME OF DAY' afer complete the boot sequence.  After the upgrade to Windows 7 before the device display remains with a scrolling "WELCOME to HP ENTERTAINMENT CENTER" and does NOT change to a 'TIME OF DAY' constant to the completion of the commissioning.  Y at - it a solution to make the front display of Windows 7 on the starting unit sequence act as the boot sequence for Windows XP Media Center front screen?

  Please try to install the following hotfix:

  FTP://ftp.HP.com/pub/softlib/Software7/COL13725/PV-38498-2/sp26654.exe

  NOTE: Please ignore any warnings during the installation of this hotfix.

• Windows XP Media Center 2005 cannot connect to the Internet

  Dear all,

  I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.

  You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.

  Thanks for your help and your time

  Martyna

  Hello

  Sorry for the question but what modem did you mean?
  A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
  If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automatic

  You should also check that you firewall settings.

• I have upgraded to Windows XP Professional and now Windows XP Media Center won't play DVD - component missing.

  Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please

  Thank you for your help. Here are the answers your request:

  "Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
  Complete error message: "Missing Component - required component Media Center is.
  missing. Please contact the manufacturer of your hardware.
  KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
  The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.

  This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.

  Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.

  The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.

  Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120

  Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.

  Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.

  PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).

• Windows 7 Media Center Security Upgrade need to download audio books from Overdrive

  Build of Windows 7 Media Center 12 blocked all my old music files, and I can't download audio books from Overdrive. In the Media Center, I have a pop-up with a link towards an upgrade of security about protected files, but when I have a link to this page, the upgrade button is gray.  Microsoft says it's a prob of OEM and contact the manufacturer. EMachines says that it's probably my Norton blocks.  He tried to disable the firewall and Norton and still could not get the update for the Media Center.  What gives?

  Hi pamelals2u,

  I suggest you follow the steps provided by Naman R in this link: http://answers.microsoft.com/en-us/windows/forum/windows_7-sound/upgrade-button-is-greyed-out/5a4ac404-ed00-4a4e-920b-91e5e5decb5b

  I hope this helps.

• Units (Windows 7) media center impossible compleate the next option every time that I "click" or choose it from the menu option within the center of Meduia

  Whenever I "click" or choose it from the options menu in the center of Meduia units (Windows 7) media center impossible compleate the next option.

  Whenever I select the option, "more", all I get is a splashbox that says simply, "" INVALID APPLICATION, cannot start. "" This option is located in the general Menu of the Media Center in the submenu 'tasks' .

  Thank you...

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• When loading Windows XP Media Center Edition 2005, my Lifecam Webcam from Microsoft HD turns on and starts recording.

  Original title: Okay, I bet no one has ever heard of it...

  At the Media Center 2005 Rollup 2 loads, my Lifecam Microsoft HD Webcam turns on and I guess that starts recording. WHAT? What is happening with this? I have Windows XP Media Center Edition 2005, SP3.

  Hello

  -Did you change on your computer due to which the question has begun?

  I recommend you to start your computer in a clean boot State and turn off Microsoft Lifecam Webcam to run at startup HD.

  Note: Don't forget to restart your computer in normal mode by following the steps described in the article.

• I have Windows XP Media Center 2005. The Media Center is missing. Help, please. Thank you...

  Windows XP Media Center 2005 will not open or load the file Media Center.  My computer does nothing but
  freeze the other programs.  The only way to close Media Center is to go to the Task Manager.

  Hello Beckymyers,

  Thank you for your message.  Let's try the following:
  Click "Start" > click "Run" > type cmd and press "Enter."
  At the command prompt, type the following entries and press "Enter" after each of them
  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  After you run these commands, restart your computer and test the Media Center.  Please let us know the result.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Media Center plays audio from VOB, no video. However, the VOB files play fine in Windows Media Player 7. What gives?

  I have VOB files in a VIDEO_TS folder.  Windows 7 Media Center will generate a thumbnail for them, but when I play them I'm audio but not video.  However, when I play in Windows Media Player will play without any problem.  Can someone help me solve this problem?

  Hello Pinkled,

  Just got out how we can get video of .vob files play correctly:

  It's pretty simple, just add the folder to the library of MOVIES instead of VIDEOS. It is true that videos, just listen to the audio, but no video appears during playback.
  Once you add to the movie library, W7 Media Center it will read "like a DVD" then you will also be able to navigate through menus.

  Hope that works for you also.

  Kind regards

  Miguel.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Windows 7 media center tv guide planning lost .dll

  My anti-virus found a .dll suspect something like a regular planning. I deleted the .dll file and it seems that it was necessary for the update to Windows 7 media center tv guide (now displays the available data). I have reset media center several times with no luck. Unfortunately, I can't restore to an earlier date or obtain the file from my Recycle Bin. I still have Windows 7 64 bit upgrade disk if I can find the name of the file and know where to copy it in.

  Thanks for your help,

  jqh947

  Hi jqh947,

  1. you remember which dll file has been deleted?

  I would say Mr scanner SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Media Center can't find my DLNA certified DMP (an LG BD390 Blu - ray player model network).

  I have a Player LG Blu - ray wireless connected to my home network.  Configuration of the network connection to the format Blu - ray says it is successful, and it is capable of downloading movies on the shared internet connection.  My management software from the network router (WRT610N model) Cisco Linksys® Network Magic Pro displays the Blu - ray player on its network card device.  LG Blu - ray player is a certified DLNA DMP (digital media player) device and the software supplied LG Nero MediaHome 4 (Server DLNA media graduate) successfully concludes the LG Blu - ray device when it starts.  So far, I've been unable to get the Windows 7 Media Center (supposed to be a media graduate DLNA server) to find my network Blu - ray player.  But the problem is more than just that the Media Center do not find my network device, even the 7 network and sharing Center window is not this network device when I select «View full map»  When I go to printers and devices on Windows 7 and select 'Add a device', it does not find my device of network Blu - ray player that passes by the Cisco Network Magic software and Nero MediaHome 4 software.  So what prevents the network of Microsoft Windows 7 software and Media Center software to my LG Blu - ray network player?

  Media Center Extender technology owns and uses any DLNA.
  I don't know why Umesh from Microsoft Support thought it was possible. You
  will not be able to set up your Blu Ray drive as an Extender. You CAN use
  Windows Media Player READ ON technology and streaming technology. You will not be
  be able to use your new drive LG Blu - ray network as an extension inside the
  Media Center interface.

  On Tuesday, 22 December 09 23:09:50 GMT, Gary Henn wrote:

  So why Microsoft Media Center processes to detect a 'Media Center
  Extender"requires the manual step of reading a 8 digit number displayed at the
  DMP device during the process of detection of a DMP device (this is the step that)
  fails with my Blu - ray player, it does not display a number of 8 digits on my HDTV
  connected to it)? The Nero MediaHome program does not require this manual step
  It performs detection automatically.

  Barb Bowman www.digitalmediaphile.com

• Satellite A100: Need drivers for Windows XP Media Center Edition

  Hi there, hoping someone can help me, just bought Windows XP Media Center Edition, had home installed, installed a new and I'm missing some drivers (Ethernet controller, mass storage controller, network controller, PCI device and video controller VGA)

  I have a satellite A100 PSAA9E and I was wondering if there is no driver for this edition of windows yet or if there is no alternative that is pro XP drivers should work?

  Thank you
  Andy.

  Hello

  On this page of Toshiba, you will find drivers for different units.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Win MCE drivers are not available for Satellite A100, only Win XP.
  Jasmin said, you can try to use the Windows XP drivers as the Win MCE is a WinXP with additional features.
  Check it out

• Zune on Windows XP Media Center Edition 2002 software

  Is there anyway to get the Zune software to work on Windows XP Media Center Edition 2002?

  Hi Balram,

  If you are looking for Windows XP Zune application, you need Windows XP SP3.

  You can download the software from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=27163

  If Windows XP SP3 is not installed, you can download it from this link

  http://support.Microsoft.com/kb/322389/en-us