Interpret the works of sequences well pre8 but NOT pre9

Similar Questions

• Pavilion G7-1260us: 3 responses to the previous question were well intended but not useful. Video recording palette failed

  Apologize to publish new same problem but to reaffirm for clarification. The computer works fine with default (poor) VGA graphics, but stops almost immediately when using Intel HD 3000 graphics. All the equipment tests pass including the motherboard, but the test of component for video control palette fails.  I guess that it is the graphics card Intel chip but I don't know if it can be repaired or replaced... or anything else will cause the described problem? I have a problem almost identitical with a Macbook Pro with Intel High Res graphics card. Works well with the low-resolution graphic aps and I fear it's an insoluble Intel so stir the question.

  Finally 'pass' on all the tests.  After replacing the CPU, Windows 7 started many, many updates to loading. I downloaded the HP Vision Hardware Diagnostics for additional verification, and that's all right. Graphics card Intel HD 3000 works with 3D Open GL tests.

  Thank you.

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• LifeCam HD-5000 works fine in other programs, but not in the Lifecam software accompanying

  My Lifecam HD-5000 works fine in other programs, but not in the Lifecam software that comes with it, I get "There is no camera connected to this computer." I tried to restart and uninstall then reinstall the software.

  Hello

  LifeCam HD-5000 - Support and warranty (3 years)
  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-5000/7ND-00001#support

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  http://www.Microsoft.com/hardware/en-us/support

  Product Solution Center
  http://support.Microsoft.com/hardware

  MS material takes in charge and recourse in warranty (90 days support of)
  the date of the 1st call).

  1-800-936-5700 or 1-800 Microsoft (642-7676)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do I programmatically load and show the façade of a vi but NOT run it?

  Is it possible to load and display the front panel of a vi but NOT run?  I start with the AsynchronousCallAndForget.vi from the example finder and inserted a node invoke with the Open FP method call before the starting node the asynchronous call. The vi that I'm loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thank you!

  

  Why do you use the asynchronous call? If you simply open the VI reference, then call the FP. Open method, it works very well. You can then call the VI run method which wait until is set to false if you want to execute asynchronously, it is how we did in ye olde days before we have this fangled tricks "Start Asynchronous Call.

• My DVD works on our television screens, but not on some of our friends in televisions

  My DVD works on our television screens, but not on some of our friends television screens.
  He plays a photo then restarts and then plays two photos then restarts then plays three photos then restart etc etc..
  What is a parameter when creating the video to digital photos or a parameter on television of our friends?

  It has nothing to do with the connected TV!
  It s is the DVD drive!

  Some players can't handle all CD or DVD! Which is one reason why the created image DVD does not work with the friend (s) disk drive.

  You will need to test various DVDs of different drive manufacturers. Some discs are more compatible as other drives

• yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

  Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon.

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this?

  Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this? I am writing an essay and I know I misspelled words it contains, but the red line will not work. What should I do about it?

  Hi Brittany,

  You use Microsoft Word?

  If you use Microsoft Word, you can post your request in the Forum Office for assistance.

  Microsoft Office Forum

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

• Question about media queires working in FF, and CR, but not IE

  Hello

  I'm trying to understand why my meïdia queries work in FF and Chrome, but not Internet EX 11.

  The page here: http://skeeterz71.com/auto/dealers.html

  The form at the top of the page, the pictures and information must be centered on the page to these: If someone has the time to watch, I would appreciate it.

  @media (max-width: 775px) {}
  .bold-product-title {}
  text-align: center;
  }
  .product-image-left {}
  text-align: center;
  }
  {.dealer-title
  text-align: center;
  }
  {.dealer-location
  text-align: center;
  }
  {.dealer-phone
  text-align: center;
  }
  {.dealer-information
  text-align: center;
  }
  {*.search city
  text-align: center;
  }
  . Search-of-city-select {}
  text-align: center;
  }
  }

  Thank you

  P.S. I use Bootstrap, but don't know of a bs class that will focus in Tablet and phone discovers only.

  Too bad. Don't have a closing tag on the right to request above this one... I went on the css so many times trying to find the problem and do not see it until about the 10th time. Probably should call it a day.

  I noticed in the element inspect it is to say, he doesn't yet see the request of media at all. Which clued me and should have been my first thing I should in fact...

  FF and chrome seen the request and IE is not. Strange, but IE was right in this case. FF and chrome gave me a lot of slack :)

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• Hi there, when I drop my photo in photoshop it disappears, it shows in the layers that it is there, but not in my screen

  Hi there, when I drop my photo in photoshop it disappears, it shows in the layers that it is there, but not in my screen?

  Hello

  May I know if you use mac or a window.

  If you are using windows, please check the color profile assigned to the monitor, it could be because of the corrupt color profile.

  • Right-click anywhere on the desktop, and then choose the screen resolution
  • In the resolution of the screen the dialog box click the parameters in advance
  • The graphics card settings box will be the opening upwards
  • Go in the color management tab and click on color management

  

  • Click Add at the bottom, if this button is not highlighted check the option 'use my settings for this device'

  

  • In the next screen, provide you a list of the color profile. Scroll down and choose "sRGB IEC61966 - 2.1"

  

  • Click ok in each window.

  Restart Photoshop, and then try again.

  Thank you

• Expiration of my subscription of the CC, I bought a new but not be able to use again. He's trying to use the free trial version at the same time, but after installation of app still redirects me just say renew subscription and won't let me open. Help, ple

  Expiration of my subscription of the CC, I bought a new but not be able to use again. He's trying to use the free trial version at the same time, but after installation of app still redirects me just say 'Renew subscription' and won't let me open. Help, please

  Contact adobe support, https://helpx.adobe.com/contact.html

• a new datastore iSCSI (disk/lun) appears in the inventory. Warehouses of data, but not availble for quick vMotioning...

  Hello

  We have added the new datastore iSCSI (disk/lun)

  This new data store appears in the inventory. Warehouses of data, but not availble for quick vMotioning or the creation of a new virtual machine.

  did we miss a step?

  Ty

  r

  The reason is that the data store is not presented to all hosts in a cluster. When you create the VM in vCenter Server, only warehouses of data visible to the host on which the virtual machine is created are displayed.

  Make sure the presentation on your storage system is correct and rescan your hosts.

  To check the above, take a look at the Configuration-> Storage for guests.

  André