Error 1327 on installation of c309g photosmart printer - "invalid drive c:\.

Similar Questions

• Error blocks the installation of the HP printer driver: slbcsp.dll sccbase.dll, gpkcsp.dll, and Enum.

  Original title: installing software with Vista Home Premium HP printer successfully, but does not using Vista Ultimate operating systems in a Dell computer.

  I am trying to install the HP software for the printer all-in-one HP Photosmart 3310 my new Dell 'renovated' which has Vista Ultimate operating system. This software worked on my last replacement of Dell 'renovated' who had the Vista Home Premium operating sytem but will not install with Ultimate.
  I get a message that what follows is blocking the installation:
  Slbcsp.dll
  Sccbase.dll
  Gpkcsp.dll
  Enum
  Any help would be appreciated. Thank you.
  Pequeno Penny

  Try these methods to solve the problem.

  Method 1: Re-register the following .dll files

   

  a. Click Start, and then click on run

  (b) in the Open box, type cmd, and then click OK.

  c. the prompt, type the following lines, pressing ENTER after each line:

  § regsvr32 slbcsp.dll

  § regsvr32 gpkcsp.dll

  § regsvr32 sccbase.dll

  d. click OK the message DllRegisterServer in filename succeeded.

  e. Type Exit, and then press ENTER.

  Method 2:

  Prior to remedial action, ensure that there is only one copy of slbcsp.dll sccbase.dll files in your C:\Windows\System32 folder. Create the following two subkeys:

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider\Schlumberger
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography | Defaults\Provider\Infineon

  To do this, follow these steps:

   

  a. go to the start menu and click Run.

  b. type regedit in the Open box, and then press ENTER.

  c. find the following registry key
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography | Defaults\Provider

  d. Select the provider key.

  e. then, click the Edit menu in the Registry Editor window, select new and then click key.

  f. name the new key as Schlumberger cryptographic service provider.

  g. Repeat steps d and e. This time, name the new key as Infineon SICRYPT Base Smart Card CSP.

  h. then select the first key that you created, which is the Schlumberger cryptographic service provider.

  i. now, right-click on an empty area in the right pane of the Registry Editor window, select new, and then click String value.

  j. right click on the new string value that you created, click Rename, and then rename the Image path value.

  k now, right click on the string value, path of the Image and click on edit in the box under value data write C:\WINDOWS\system32\slbcsp.dll.

  l. click OK.

  Mr. then select key Infineon SICRYPT Base Smart Card CSP.

  n. Repeat step i and j.

  o then, right-click the string value, path of the Image and click on edit in the box under value data write C:\WINDOWS\system32\sccbase.dll.

  p., click OK.

  q. even once, select the key from the Service Provider Schlumberger cryptographic.

  a. right-click on an empty area in the right pane of the Registry Editor window, select new, then click DWORD value and rename it to SigInFile.

  s. again, right-click on an empty area in the right pane, select new, then click DWORD value and rename the value type.

  t. then, right-click on the value Type, select Edit, and in the box under value data, type 1. You can select hexadecimal or decimal Base.

  u. click OK.

  v. then select Infineon SICRYPT Base Smart Card CSP key in the left pane of the Registry Editor window.

  w. repeat r, s and t.

  x. click OK.

  See how it goes.

  Regarding enum error, see the steps in this link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/Photostmart-C4400-Problem-Enum/m-p/88615

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Adobe Acrobat Reader Installation Error 1327: invalid drive mapped to a user folder

  Try to install Adobe Acrobat Reader on Windows 8 so that I can make the PDF Renseignez form (which doesn't seem to work with the default player Win8 app). I get the following error in the installation of Adobe:

  Error 1327.Invalid Drive: P:\ mapped to a user folder. The drive does not exist or could not be connected. You can disconnect the drive or reassign the drive letter. For more information, see http://kb2.adobe.com/cps/404/kb404946.html

  I have P:\ drive mapped to a folder on my corporate network offline indeed. Following the instructions on the web site indicated always is not allow installation.

  Any ideas?

  David

  I know this post is very old, but it is the top google result when searching on this question, so I thought that a useful response would be in order.  I also had this problem, but I discovered the problem in the way I had my place set for My Documents, my pictures, etc..

  Short answer, you must use UNC paths for mapping.

  Longer answer - like you, I have a House (in my case sup) drive connected to my network of the company.  So, I can navigate to U:\Documents.  I had put the location of my documents (and other user files) to U:\Documents, well it worked most of the time it's really not the right way to do it.  If you open your drive mapped in file Explorer, the window title bar will show you the UNC patch.  It will look something like this: yourUsername (\\servername\home$).  Set the location of your My Documents, etc. to match - for example, to \\servername\home$\yourUsername\Documents

  Note that you can not change just the My Documents - you must fix all of your user files that point to a network drive letter (C:\Users\blah bla... is fine) in the format of a UNC path instead.  Then re-run the installation of acrobat and you should be golden.  If the foregoing makes no sense to you, or you do not have the required privileges on your workstation, talk to your resource and they will be able to sort it out for you.

• Error 1327.Invalid Drive: G:\ during installation of the software

  Original title: I'm trying to install Microsoft WSE 3.0.msi and I get error 1327.Invalid Drive: G:\

  A program I had on my computer wouldn't work the other day when I tried it.  Help on software site says he uses Microsoft WSE 3.0 runtime and to make sure it was on my computer.  It wasn't that I downloaded and tried to install it and got the same message I have original received at the start of this process.

  Hey Bill,.

  Try the steps of Miller - technician technical support of the http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1327-invalid-drive-g-when-i-try-to-install-a/ccb3a5bf-9d38-4b1c-8f33-d6a53b1c1a36 link and see if that helps.

  If the problem persists, try changing the drive letter G:\ to some other letter as a work-around.

  a. press the 'Windows' and 'R' at the same time and type "diskmgmt.msc" in the prompt to run it to open the disk management window.

  b. right click on the drive G:\ and select "Change Drive Letter and paths".

  c. to change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click OK.

  d. restart the computer to ensure that the changes are applied.

  Reference: http://windows.microsoft.com/en-in/windows7/change-add-or-remove-a-drive-letter

  You can also try the steps in the KB Microsoft http://support.microsoft.com/kb/327763 article which has worked for some users with the installation of the software.

  Note: The steps from the link will work for any installation of software/program that uses a disk. Because the steps deal with the registry editor, we recommend that you take a backup of the registry before performing the steps. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Let us know if this information useful.

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Photosmart 7525e: print error message on the monitor, but PDF print OK

  W10 64 bit Office current with Windows updates.

  HP7525E connected via USB.  Current with updates from HP and exploit the full package of driver HP

  When I click to print a PDF file, I get a message popup Windows that quickly disappears, but the part of the message says «Error printing...» «or ' unable to print on...» ».  But the page prints OK anyway.  I have today when it appeared has clicked to print a Groupon in mode 2-sided but also chose to print only the current "page (and in my opinion, there is only 1 page).  Do not print in color, btw.

  A ran HP Print & doctor Scan that found no problems.

  Do not restart.

  Close the browser (Edge).

  Launch of the new browser and returned to Groupon.

  This time the same groupon (in monochrome) of printing simple face mode or mode 2 faces, that the error did not appear and the PDF printed fine as before.

  I have seen the error several times before but have not been studied.  I know I saw him several times when printing PDF files.  I don't remember if I saw it when you print other things.

  Completely uninstall Acrobat Reader on your system.  Now, go to Adobe and download and install Acrobat Reader DC.  Try now.

• Reinstall the premier 11 elements after the original installation disk has failed. Error 1327.Invalid Drive

  I'm trying to reinstall Adobe Prime Minister 11 elements of DVD on a 64-bit Windows 7 system.  The player who welcomed my original instance failed.  It was installed on a secondary drive, E that, unfortunately, is no longer with the system.  In the resettlement process I'm removing the original instance, as seemes to be mandatory, but I enconter error "Error1327.Invalid Drive: E:\'." "

  How can I get Adobe Prime Minister 11 items on my system?

  Note: A similar problem with Photoshop Elements, except that none of the errors are detected, it just will not start as he seems to have pointers to the failed drive.

  I used CCleaner to clear up any reference registry for two installations of problematic items, and I reinstalled the.  There was a lot of entries, but they were all marked as problems by the tool, as they were easy to find.  Thanks, Mylenium.

• Photosmart printer

  I use my laptop via a router. I added a new router and now my 310 all-in-one a not print and the blue wireless light flashes.  What can I do?  My laptop uses Windows 8.  My office uses XP and is also not printing, even though it is directly connected.

  Your XP desktop computer is directly connected to what?

  Most probably, you use a wifi connection for your printer and the installation of the new router has resulted in the printer is automatically assigned a new IP address that is different from the IP address configured in Windows when you initially installed the printer.

  Is there an error message on the LCD of the printer? If so, please provide the full text.

  What you need to do is to configure the printer to use a static IP address and then re - install the printer on both computers so that they have the correct address.

  If you need detailed instructions on how to do the above, please start by providing the following information:

  FIRST PART

  1. is the printer connected by USB cable to do anything?  If so, what is it connected?

  2. What is the brand and model of your new router?  Please, look at the label on the back or the bottom of the unit and include any version of material that could be mentioned.

  3 follow these steps on each computer (use the one which lets you post your answer here).

  Open a command prompt window *.

  • In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  • In the opened Notepad window, click Edit > select all (or press CTRL + A) and then click Edit > copy (or press Ctrl + C)
  • In the body of your Question, right-click > paste (or press CTRL + V) the data of the Notepad window
  • Close Notepad and remove ipinfo.txt from your desktop

  * To open a XP command prompt window, click Start, and then click Run.  Type "cmd.exe" (without the quotes) in the "Open" box, and then click OK.

  To open a command prompt in Windows 8 or 8.1, see http://pcsupport.about.com/od/windows-8/a/command-prompt-windows-8.htm

  SECOND PART

  In addition to the ipconfig information, print a Network Configuration Page using the controls on the front panel of your printer.  For instructions, see--> http://support.hp.com/us-en/product/HP-Photosmart-Premium-e-All-in-One-Printer---C310a/4023238/model/4231204/document/c02788951

  Please include in your response the IP address of the printer and default gateway "Configuration Source" as shown on the Network Configuration Page.  For a more detailed explanation of the information on this page, see--> http://support.hp.com/us-en/product/HP-Photosmart-Premium-e-All-in-One-Printer-series---C310/4023238/model/4231204/document/c02790693/

  THIRD PART

  On the XP computer:

  • Click Start, and then click on 'printers and faxes '.
  • Right-click on the icon for your e310a and select 'properties '.
  • Click the "Ports" tab
  • Position your mouse in the header line between "Port" and "Description" that the mouse pointer turns into a two-headed arrow.  Click and drag to the right to increase the width of the column 'Port '.
  • The information in your response that is in the column 'Port' of the line checked and updated.
  • Click 'Cancel' to exit the printer properties dialog box

  On the computer that Windows 8:

  • Use "search" and type "Printers" (without the quotation marks) and then click on the link for "devices and printers".
  • Right-click on the icon for your e310a and select 'printer properties '.
  • Click the "Ports" tab
  • Position your mouse in the header line between "Port" and "Description" that the mouse pointer turns into a two-headed arrow.  Click and drag to the right to increase the width of the column 'Port '.
  • The information in your response that is in the column 'Port' of the line checked and updated.
  • Click 'Cancel' to exit the printer properties dialog box

• Photosmart Premium C410a: driver installation fails repeatedly wins 10

  Network printer on the local wifi network.  Became the busy error scan after reclassification of Win7 to Win10, did not know that was a problem known to HP, so uninstalled the printer drivers and downloaded the latest version of the driver, went to reinstall.  It happens on the screen "I agree", and when I click Next, it flashes "Remove HP software" and closes.  Tried several times.  Checked if it has been set to the private network, it is.  Tried the HPPrinterInstallWizard, it downloads the same driver, take me up to that point, and when the installation fails it curls back and begins to do the same thing everywhere.  Tried the HPPrinterandScanDoctor, it does exactly the same thing.  And of course, HP don't talk to me because my printer is not new.  I even tried the old software CD (2012), it loads and says: "Welcome Back! Click here to exit. »

  Hi @pgd1,

  Welcome to the HP Forums!

  I see that you have trouble to install the printer HP Photosmart Premium c410a on Windows 10. And I'm happy to help you!

  To check the printer hardware is functional, are you able to make copies using the printer scanner glass?

  You see error messages on the display of the printer?

  How is the printer connected? Wireless, Ethernet or USB?

  In the meantime, try the following steps in the following order:

  • Uninstall the software. Uninstalling the printer software. (Only do it if you think that some software are always installed.)
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows.

  Hope that these aid measures and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• Photosmart printer 7520

  Bought the printer 7520 week last as a replacement for our Photosmart Premium C310. When we go to print anything, the list of options is so small, I wonder if there is an error in the installation of the software. We used to be able to select from about 5 different printing processes, select 2 faces automatic printing or not and in levels of gray or black print without having to go into the Advanced tab. He was there in the preferences. Can someone let me know if I made a mistake in installation or is it that 7520 fundamental?

  Hello

  It's much more simple default configuration and users can change if necessary for a particular job. Please use the preferences under the HP printer Assistant:

  (a) double-click the desktop printer icon.

  (b) click on set preferences.

  (c) click on advanced

  d select options to print to default ea,

  (e) click apply/Ok

  When a particular impression, you can override the default values. In many cases, the printer going more like deafault said without borders but you want to print duplex on plain paper.

  Kind regards.

• Impossible to uninstall several programs in Control Panel. Error 1327: Invalid Drive.

  Using "Add/Remove Programs" in Control Panel, I'm trying to uninstall several programs from my portable computer and everyone gets massage "Error 1327.Invalid Drive E:\. I click 'OK' and receive another message: «Fatal error during installation»

  My laptop was connected to a network and I used an external backup drive; is no longer connected to one, but could be.

  original title: Error 1327. Invalid drive: E:\__

  Hi Tuxedocat,

  Thanks for posting. Please, try the following.

  Press start, run and type Regedit

  Find the following folders from the shell of the Explorer\User HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\

  In the pane right - see if there are any entries which has a F or all other letters in addition C (your OS folder) change data of C:\

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows updates fails, get "Error 1327 Invalid Drive/M" error when trying to install updates by using the stand-alone packages.

  Original title: I deleted the files from automatic update and windows update keeps trying to install

  I've done an update for a long time on an old computer unused spare XP and Windows Update said that he had to update a large number of files, so I have left to download and install.  Once the 45 updates completed, I rebooted as instructed and proceeded to clean a lot of old data.  Apparently I deleted (7) files for Office M/S that must be installed, because the Winows Update icon in the status bar telling me I had 7 sto update to install.

  Now Win Update always tells me that the files should be updated and starts the process, telling me that they are already downloaded, but it fails every time because they are not where they should be, as I deleted them without meaning to.  How can I do the update for these startup files, or where can I get the appropriate files to allow the update work properly?

  Yes, I know it was stupid, but this is the frist time that I asked for help from Windows 3.1, so I don't feel too bad.

  I have download the individual Ko * .exe files support, but get an error 1327 Invalid drive / M error whenever I try to install one of them.

  Thank you

  Paul

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  Have you ever used registry cleaners?

  Notes in my old an assignment by Peter Foldes (long ago)-

  '0 x 80070643 error '.

  Use the following fix below. Please post back with results

  subkeys to rename 1 Office

  Note: Remove the following registry keys may reset customized user
  settings for your Microsoft Office programs.

  1. close all applications.
  2. click on start-> run, type regedit, and click OK.
  3. Locate and select the following registry subkeys:

  HKEY_CURRENT_USER\Software\Microsoft\Office\11.0
  HKEY_LOCAL_MACHINE\Software\Microsoft\Office\11.0

  4. right click on 11.0 and rename them in Old11.
  5. close the registry editor.

  2. detect and repair Office 2003

  1. on the Windows taskbar, click Start, point and click Control Panel.
  2. double-click on Add/Remove programs.
  3. click on change/remove programs in the left pane.
  4. Select Microsoft Office Professional Edition 2003 in the right pane, and then click on edit.
  5. Insert the correct CD version when she needs.
  6. Select "Reinstall and repair" and click Next.
  7. Select "detect and repair errors in my Office installation".
  8. click on install and wait for the process to end.

  3. install the updates
  --
  Peter '.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Error 1327 Invalid drive: message E\?

  During the attempt to re - install my printer PSC to my HP Pavilion 305 w with Windows XP, I got the error 1327. Invalid drive: Message E. What can I do?  Thank you.

  Hi CarlaBrowning,
   
  Here's a similar post on this issue. Check the answer given by "Shawn - Support Engineer" and follow the steps proposed by him to solve this problem.
   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the windows below support article.

  How to back up and restore the registry in Windows

  Error 1327. Invalid drive: E:\__