Satellite L50-B-235 psktge - ACPI\TOS6205 running Win 7

Similar Questions

• Extremely slow start of satellite L50-B-235

  Hello
  My laptop takes up to 4 hours to set market, when he actually decide to turn.
  I press the power button, the button lights up, I hear the fan starts working, but the screen remains black. After a few seconds, the fan calms down and that the power light, it is completely "dead" until after several hours, it starts suddenly starting. Initially this after 10 minutes or so, but its worst got to the point that most of the time it was never even starts. Please can someone help! I am in desperate need of my laptop for work!
  Thank you

  Hello
  When my laptop starts up, it takes several hours, but most of the time it doesn't start at all.
  I press the power button and the button lights up. I can hear the fan start, but after a few seconds he would calm down even once.
  The screen remains black, until he comes to life after several hours, but as I said, most of the time that it is never the case.
  Please can anyone suggest how I might solve this problem, because I am in desperate need of my laptop for work!
  Thank you

• Disk error hard satellite L50-B-235

  Laptop stopped recognizing Bluetooth, so restarted, but when you start it says something to check a disk and repair the hard disk, which then laptop crashed before completing. Would not start once again, it is:
  1 past age on the toshiba screen then tell no boot device
  2 load the login screen, then past ages in front welcome saying windows preparation and loading a temporary profile. When he made a mistake shows saying Windows detected a hard disk problem. Back up your files to prevent loss of information and then ask the computer manufacturer to determine if you need to repair or replace the disk. It will then crash after 10 to 30 minutes and the blue screen with my critical_process_died error, which restarts always shows described in 1.

  I have Windows (updated 8) 10 and the laptop is less a year. I've tried various searches on google and fixes, including:
  Update of system drive where Windows is is locked
  Check disk either from the start menu or the command prompt in the temporary profile
  Changed the boot order and then back again
  Several reboots
  Open to the top of the unit and removed, then replaced the hard drive

  Nothing worked, I do not have the recovery media and not really means for the moment. This could be a real hard disk problem (it heats up during boot ups) which would mean it needs to be replaced? If Yes is that these can be purchased with Windows installed on it?

  While I update to windows 10 I have a probem with the use of the hard drive because he moved to the use of 100% and the laptop just crashed.

  I search in the Admin Panel and I discovered that I have a service called host system: local system (private network). I tanslate it Spanish which is the language was my laptop.

  Also I have a problem whit the video card because systems always use the graphic istead intel video card (AMD one). I tried to solve this problem in istalling the graphic control of AMD program, but the program doesent work better because the use of the hard drive is always more 100% and the experience of the computer laptop full length.

• Satellite C850 - 19(d) - unknown device ACPI/TOS6205 Windows 7

  I am a unknown device in windows 7 on a toshiba Satellite C850 - 19(d).
  The hardware ID is ACPI/TOS6205.

  Suggestions of Al in the forum and the net did not work:

  It is not bluetooth: the two drivers in the drivers download page, none has solved the problem:
  [t 72426]

  HDD/SSD Alert Utility and PC Health Monitor installation because of the suggestion that he had a problem with HDD Protection Utility:
  [m 201203]
  [t 53498]

  Can anyone help with this?
  Thanks in advance

  Hello

  The ACPI/TOS6205 seems to be the Bluetooth device.
  Satellite C850 - 19(d) was equipped with a Realtek RTL8188CE - VLSA WLan / Bt combo card.
  That's why I m sure its BT device.

  You said that you have installed the driver BT but it didn t work.
  I think that you did it wrong.

  The point is that WLan / Combo cards needs a filter driver BT package.
  IF you need to install: Realtek WLan driver, then driver Realtek BT filter package and, finally, the battery Toshiba BT.

  Welcome them

• Bluetooth missing: ACPI\TOS6205

  Hello Forum,

  I'm missing the Bluetooth feature. In the device manager is an unknown device listed: ACPI\TOS6205. All other devices are identified.
  My laptop is a Toshiba Satellite L50b PSKTQE, I'm on Windows 7. Link to drivers

  I have already installed stand 'Packages Bluetooth Filter Driver' Atheros and Broadcom. But no Bluetooth. I read that the Bluetooth feature is actually part of the apparatus of 3160 Intel AC, so I installed the "Intel Driver Update Utility install". This tool downloads drivers for Bluetooth and Wlan (Wireless_18.11.0_s64.exe) (WP - BT_17.1.1504.01_S64.exe). But after installing the drivers still no Bluetooth.

  Then I restored windows to a Quick Restore Point where only the Chipset Intel driver have been installed. Here, I installed driver to stand for the Intel AC 3160, once again, but not Bluetooth.

  Can someone give me a clue what I need to do to get the Bluetooth running?

  Thank you

  Peter

  The ACPI\TOS6205 driver - it is Bluetooth Stack for Windows by Toshiba
  Go to download this driver to
  http://www.support.Toshiba.com/sscon...tentId=4007183

  It works. I tried this.

• Satellite L50-B-192 with Linux, no compatibility issues?

  Hello world

  I would buy a new PC, almostly Toshiba Satellite L50-B-192.
  In fact, I heard that a lot of people found that it is difficult to install linux, and many could she!, any body have had such an experience?
  Would you recommend buy me this model. I'll use for some applications, graphics, programming and development.
  Any advice will be highly appreciated.

  Hello

  I think that you will have a good experience in running a late version of Linux on this model. Just trying to get a 4 core...
  The biggest problem I've seen with L50 - B, it's that the maps non - Intel WLAN don't work under Linux yet.
  But your model appear to have an Intel WIFI card, so you should be fine.
  If you download and install the kernel 4.1 I think even shortcut keys can behave very well.

  Tom BR

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Satellite L50-C-22 - update of victory 10 home win 10 Pro

  Summary: I have a new Toshiba laptop, pre-installed with 10 Home X 64 Windows and want to update, as simply and not destructive as possible to 10 Pro Windows.

  I bought my Toshiba Satellite L50 - C - 22 L last month and, overall, I'm very happy with it. He moved in with MS Windows 10 (X 64) running on 8 GB of RAM and works well. I have a couple of other machines running Windows 10 Pro and missed some additional features, so I bought a Pro product key. I had assumed that I would go to the settings screen, choose the 'Activation' option and then click the button change the product key. My new key would be accepted and the system should perform an upgrade in-place to Windows Pro 10.

  Which has proved to be a little ambitious.

  The process failed with the message "the product key you entered cannot be used to activate this edition of Windows. Please try a different key. I spoke to Microsoft and they have confirmed the key that it is authentic, but suggest it only works if I rubbed and rebuilt laptop computer with a new installation, registering the new product key to a suitable place in the build process. (This raises the question of what the "Change product key" button is a commercial copy of the OS, but that's another story).

  My question is, can I follow the instructions to create a recovery on the laptop media to recover a version of the PC factory reset, but change to include the key product Pro Win 10? If I understand correctly, if there is a WIM file as part of the recovery media, it contains all versions of Windows 10 32 - bit and 64 - bit. Installed the final version is 'unlocked' by the product key. This depends, however, how Toshiba packaged installation of recovery files and if they can be twisted this way.

  Of course, there may be a more obvious way to achieve the same goal I'm missing completely, so any other suggestions gratefully received.

  Thanks for reading,

  Steve

  Bump - no response in 3 months. Isn't anyone have suggestions?

• Satellite L50 - B - 1DV Win8.1 - Windows Update error 0 x 80070057

  Hello

  Toshilba Satellite L50-B-1DV my son has not run successfully a Windows Update since last October - I only discovered this yesterday.

  When I had a look at the updates and pretty nearly any type of troubleshooting, I try, fails with the error message "0 x 80070057. I have rooted online but can not see any patches, obvious.

  We would prefer to solve ourselves, but that machine is that six months our next step is to take it back to John Lewis for repair - which would be a shame because he uses his laptop everyday.

  Thanks in advance for any help you can provide!

  Mark

  Hello

  You mentioned the error 0 x 80070057 during installation of the update.
  This error occur due to several reasons and that's why it s not easy to say why this happens exactly. But the most common cause can be the missconfigured or damaged registry system reserved partition.

  My recommendation for the workaround:
  Try to repair the system and the registry using CCLeaner. You can use this freeware software for cleaning the registry and to remove the garabage system.

  If this is not enough, try to repair the operating system using the own options of the system.
  The "automatic repair" option tries automatically to diagnose and resolve problems that may cause Windows 8 not at the beginning or have different behavior of evil.
  Auto repair starts automatically when Windows cannot start properly. If it finds problems, it will automatically try to fix it, but it can also be started manually.

  Access to the auto repair located on Windows 8 start screen. Now "Advanced" in the search box. When the search results display, click on the category of "settings".

  Now, click on the "advanced boot options" option and you will see the screen "General PC settings. Look for the option "Advanced startup". Click the restart and Windows 8 will restart your computer to directly access the advanced boot menu.

  Click the "Troubleshooting", then on the button 'Advanced Options '. Click on the option "automatic repair". Your computer will now reboot and Windows is preparing the auto repair. When it's done, you log on to an administrator account.

  Click on the "Continue" button to continue the auto repair. Automatic repair will now start and attempt to diagnose the problem with your computer.

  During the process of auto repair, your computer may restart. It is a normal behavior. Once completed the automatic repair process, he will let know you if she has been able to repair anything. If this isn't the case, you will see a prompt asking you if you want to stop or use other tools.

  If your computer is still unable to start, you need to click on the 'Advanced Options' button, then select "Troubleshooting" and finally "Advanced Options." For an auto repair failed, please try the built-in windows 'System restore' using the recovery media or the option "Reset".

• Satellite L50 - A - 16 Q - problems after upgrade to 8.1 windows

  Hi all

  I have a problem with my Toshiba Satellite L50 - A - 16 Q.

  I decided to update my laptop to Windows 8.1 Win8, unfortunately, it was really bad decision.
  After that my computer is very slow. It takes forever to push the power button to be ready to use browser. Even Chrome does not work correctly. Before the update, my computer was big, fast and stable.

  Is there anyone who had simillar problem? Is it possible to go back to Windows 8 without destroying my C: drive?
  Maybe I should install something more?
  All drivers or another update?

  I just install Win 8.1 update and nvidia drivers graphics.

  Hello

  To be honest, I put t understand the decision to return to Win 8.
  Win 8 contained many bugs that have been fixed with Win 8.1

  Two days ago, I upgraded my new Satellite M50 - A Win Win 8 to 8.1.
  It took some time but finally win 8.1 run on my laptop and its great!

  First of all, you must update the 8 8.1 Win win recommendation of Toshiba:
  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/
  All Toshiba drivers, utility tools must be updated!

  With regard to the starting time:
  You know the hybrid mode? Default (Win 8) did not stop you probably know other systems like Win 7 offshore. The 8 winning performed the closed hybrid that allows you to boot up the laptop faster. But this has been closed not real mode.

  Here is a good description how toggle this mode:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• Satellite L50-B-166-build-in webcam is not recognized in Skype

  Hello

  A week ago, I bought a laptop Toshiba Satellite L50-B-166. After a few days everything was fine for about three days, neither Skype nor the device built-in photo active again. The driver in Device Manager, work correctly and I have two rooms: a Webcam Toshiba HD and a SCPO82.

  I have Windows 64-bit of 8.1.
  Who can he help me, please?

  Try to reset the initial configuration.
  To run the recovery process, switch on and press F12
  Then choose HARD drive recovery

  More details and get the step by step instructions here:
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  I assumed that everything should work again start Notepad with the settings

• Toshiba Satellite L50 - A battery load but remains at 0%

  Hello!

  For the last two weeks, I had problems with the battery of my Satellite L50.-a. It remains at 0%, although it will load. If I remove the power adapter, the computer continues to operate for a period of time. Now, here's the odd part. If the laptop has been in charge for a while, it stops. If I remove the power adapter it will start again and show always is at 0%, but now it works for about 1.5 hours before the battery is actually empty.

  So I use my laptop without power until it stops, then I charge for a few hours and then it stops and we start over.

  Someone has an idea that I could do to fix this?

  I tried:

  • It loads from one day to the next without using the laptop
  • Several drivers update
  • Disconnect the battery, start with power supply adapter, stop and reconnect the battery

  Hello

  Have you found a solution? I have a similar problem and cannot run the laptop with the power connected.
  I have a warning message that the battery needs to be replaced and if I do that it does not start even if the replacement battery has been charged.

• Satellite L50 - A - DTS IDT audio driver for Windows 10 required

  TOSHIBA should update drivers IDT DTS Sound for Windows 10
  It is impossible to listen to the audio without it, the program itself works, but there is no change when I move the sliders, it's the same clear sound basis without any bass...

  I use windows 10-64 bit, TOSHIBA Satellite L50 - has [P6K...]

  Tags: audio sound dts, dts, toshiba satellite, l50 - a

  I had the same problem with my Toshiba A 1j1 c50. My DTS sound with the equalizer did not work as well. First, I tried to reinstall the driver dts but that did not work. What DID do the work is the following: download the latest version of the driver IDT audio (not the dts driver), run it and click on repair. After you restart your laptop, you should be able to change the sound settings dts and again hear a big difference in the sound. I hope this will help you.

• Re: Satelite Pro - 1 5 - C850 peripheral unknown - ACPI\TOS6205

  Hey people,

  I bought a "new" satellite pro c850 - 1 d 5.
  It came with win8 (pooooh) and I installed 32 bit win7 with all ms updates and toshi.
  everything works fine - until a little thing:

  unknown device - ACPI\TOS6205
  help Google and I found that it should be the 'cpu to pci bridge'.
  on another site was recommended to install the toshi driver "tc00474200k.exe".

  tadaaaa: bluescreen ;-)

  restore the last working config, ok.

  and now? advice or a suggestion?

  thxsalot
  Mike

  This unknown device is bluetooth laptop adapter. You can download the right driver from http://aps2.toshiba-tro.de/bluetooth/

  Check it out.

• Satellite L50-A-160 does not start after the Bios Update

  Hi, first of all, this is first post.

  I have 2 satellite L50-A-160 with bios 1.1

  Problem: seems to go to sleep after a few minutes, even working on them (even with both)

  So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
  In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

  What is the problem with these computers?

  Besides; very poor battery, always shows 0% available and not charging...
  Does anyone have a solution?

  Best regards
  -always in the hope.
  GT

  Have you tried to change in Power Options?

  See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

  

  and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

  what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
  He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

  have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off