Invalid Private Key Alias - AEM Mobile Signing Tool - Android - p12

Similar Questions

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• DPS App signing tool Fehler

  Hallo ihr Lieben,

  ICH habe ein kleines problem. Und zwar möchte ich meine erste Android App vertreiben, die geschrieben und ich das Zertifikat .p12 wanted Testapp ist mit dem DPS App Signing Tool signieren. HAB mich auch an eine sehr gute Anleitung gehalten.

  However out ich eine Fehlermeldung (DerInputStream.getLength (): lenghtTag = 109, too big) und nicht ganz a tun soll ich weiss.

  I had erst gedacht der Dateiname oder der Zertifikates waren zu lang, aber auch keinen Unterschied brachten Lavaggio name.

  Anbei ein kleiner Screenshot von der Fehlermeldung.

  ES Schön wenn ihr mir site konntet ware.

  Ganz liebe Grüße, Andrea

  

  Hello Andrea,

  Given that the keytool command uses a type of default store that are not the same on every computer that you must specify.

  Please, use the following command will generate a valid P12 file:

  keytool - genkey - v de.autohausthomsen.broschuere2014.androidkey - keystore. P12 - stores pkcs12 - alias alias_name - keyalg RSA - keysize 2048 - validity 10000

  If you want to generate a valid key file, you must use the following command:

  keytool - genkey - v de.autohausthomsen.broschuere2014.androidkey - keystore. keystore - stores jks - alias alias_name - keyalg RSA - keysize 2048 - validity 10000

  Kind regards

  Mihai

• The private key is not in the file sigtool.csk

  Hello

  I am trying to install new keys to sign my application with. I use the Eclipse plugin, and when I downloaded the key, I put them all in the same directory as specified in the instructions. When I tried to install the new keys, I got this error: the private key is not in the sigtool.csk file.

  I then tried to put the keys in the same folder as the sigtool.csk file. Same error

  All ideas

  I have it figured out. The file sigtool.csk is empty for a reason, but I had one old one where else stored. If I replace the empty file, it worked.

• Copy a GBA machine's private key?

  After is you create a self-signed certificate (SHA1, 1024bits) on a unit of ACS (v4), possible to get a copy of the private key the device? We want to do for DR purposes, but have not yet been able to find a way?

  Any help, much appreciated!

  Thank you

  Rich in...

  Hi Rich.

  Its possible to export the self signed certificate and the private key to a FTP server.

  http://www.Cisco.com/en/us/products/sw/secursw/ps5338/products_user_guide_chapter09186a00805e87ce.html#wp327462

  I hope this helps.

• Impossible to import a private key RSA 2048 bits for Cisco SG500 SSL certificate,

  On a Cisco SG500 - 52 Small Business switch, I generated a new 2048-bit RSA private key and generated a Certificate Signing Request to submit to a certification authority. I received the new certificate of the certification authority and tried to import it to the switch SG500-52. (1.2.7.76, boot 1.2.0.12 firmware version)

  It is not possible to paste the text obtained certificate in the import box. the area of importation is limited to less than characters than the length of a certificate for a 2048-bit key...

  Catch-22, anyone? (Or maybe better to say, wrestling-2048?)

  Is there a solution to do this, perhaps in a more recent version of the firmware? It is possible to the CLI instead of the web interface?

  Thank you

  Hi Jay Libove,.

  You can also try with cli. Telnet or ssh to the switch, then

  terminal #configure

  Crypto (config) # certificate import<1-2>

  It gives you a prompt

  Please copy - paste the entry... etc.

  copy and paste the certificate and at the end add a point (.) at the end.

  See if this work. You must have the certificate and the private key, but the copy of the certificate request does not work.

  Let me know if I can help you further.

  Thank you

  Prithvi

• Cisco ACS 5.6 generating the CSR, the private key file and PK file

  Dear,

  I'll install the trusted certificate of 3rd party, they ask the file CSR, I know i need a key private in order to generate the CSR, actully I don't know where I can find the private key or the private key file.

  Hello OER.

  You don't have a private key to generate a CSR. The private key is actually created during the process of generation of CSR. The CA provider needs a signed certificate for the CSR for you. Once you get the signed certificate you will be 'link' with your CSR to the ACS.

  I hope this helps!

  Thank you for evaluating useful messages!

• ISE error 'private key is unprotected.

  I have two nodes ISE PSN I import certificates DigiCert ID on.

  On each node, it worked as it should, but on the other, I get:

  "" Private key validation failed: the password is invalid or the private key is not protected ".

  This is a certificate SAN for CSR is manufactured in OpenSSL from .csr and .pvk EHT.

  To make sure that I had not messed up the password, I generate a new CSR in OpenSSL, and the password is correct.

  What is the meaning of 'the private key is not protected '?

  What could be the certificate?

  I have check the certificate in OpenSSL with

  OpenSSL x 509 - in ise01digi.crt - noout-text

  Tanks

  Mikael

  Hello

  I met the same problem with private being badly protected key.

  I solved it by encoding the private key to the DER instead of PEM format.

  the command would be similar to:

  OpenSSL rsa - in [-pass pass:]-outform DER-des3-out [-passout pass:]

  I encrypted my private key with a password. That's why passin'/passout arguments are enclosed in brackets.

  And to make sure that I don't get an error again once I also used on the key 3DES encryption.

  HTH,

  Patrick

• Man, it's painful... Followed the videos... I'm at the window Adobe publish App Signing Tool

  Man, it's painful... Followed the videos... I'm at the window Adobe publish App Signing Tool... Need help to find a Mobile provision: _ and then certificate: ______. Don't know where to find these?

  

  Hello

  I know this can be difficult. You can watch the following video which helps you configure your ios developer account and get the files you need assistance: set up an ios developer.

  -Klaasjan

• Private key does not match cert.

  Hello

  I just bought certificates to an authority important cert for my area of work poc, but when you try to install them on the Configurator in the SSL part I get a "private key does not match cert".

  I got three files of digicert (DigiCertCA.crt - TrustedRoot.crt and mysite.com.crt)

  I have them open with notepad and copy all the content in a text file in the order of trusteroot mysite - digicert. This stuck in the part of the SSL certificate and copied the REA does for demand in the private key part, but it fails with this error.

  also tried downloading the cert as a pem file but the same error.

  If anyone knows what I'm doing wrong?

  See you soon

  SEB

  Solved.

  In fact, I feel really stupid but who knows that someone else could sit and scratch your head like I did so as usual better sharing where it can benefit and spare some time.

  Reading here and there (I really feel like a fool...) I figured out I was entering my CSR to enter my private key. But then, where is my private key?

  I generated the cert with the tool of digicert. Filled in all the fields so I end up with my cert and my csr... No private key

  In order to get the key of a bit of research on Google as usual and think about it.

  Add to export the certificate with the private key using openssl and managed to recover the key

  Export the private from the pfx file key file

  OpenSSL pkcs12 - in filename.pfx - nocerts - out .pem

  Export the certificate file in the pfx file
  OpenSSL pkcs12 - in filename.pfx - clcerts - nokeys-out cert.pem

  Remove the password for the private key
  OpenSSL rsa - in .pem-out server.pem

  Chained all three CERT downloaded previously into one. It stuck in the SSL section. Copied content of server.pem in the private key part and TaDaaa here goes green

  See you soon

  SEB

• "password incorrect provided to decrypt the private key"

  The keys that I generate on my Mac are unusable. Still, I get "incorrect password provided to decrypt the private key". In this case, whether or not I generate with a password.

  This is the process I use:

  ssh-keygen - t rsa-n mypassphrase f my_id

  Generate the key pair public/private rsa.

  Your identification has been saved in my_id.

  Your public key has been saved in my_id.pub.

  The fingerprint of the key is: etc etc

  Then to check:

  ssh-keygen - y f my_id.pub

  Enter the password: mypassphrase

  Loading key 'my_id.pub': incorrect password supplied to decrypt the private key

  Anyone have an idea what is wrong? Thank you.

  Turns out I had wrong instructions to the admin of the server I tried to connect to. He wanted me to use the .pub file when connecting via ssh. So what I tried to solve the problems. But that is never going to work, because the password is used to decrypt the private key, not the public key. So when I change my test to "ssh-keygen - y f my_id ' it works fine. Should have tried first. DOH.

• I need to create public and private keys for the security certificate and I can not find the certificate. Where is he?

  I bought a security certificate, and the site tells me that it has been installed successfully. I need to export the certificate so that I can create public and private keys, but I can't find the certificate to do so.

  Firefox (Firefox Orange) > Options > Options > advanced > Certificates > authorities > export

• Can I use the "Private browsing" mode on mobile?

  Can I use the "Private browsing" mode on mobile?

  Firefox for mobile has not yet a private browsing mode integrated. However, you can make the navigation in a separate or temporary, profile by running "fennec Pei" in app the N900 Terminal, or by using the Profiles Mobile add-on.

• 'stop private browsing' and 'clear history' under Tools is gray and cannot be verified.

  Problems:
  -"stop private browsing ' and 'clear history' under tools are grey and not verifiable
  -often, not always, I get a message that I can't surf the web because I'm offline; but work offline was not checked and I've never worked offline
  -on several Internet sites, such as ESPN and others, print it on a single line straddles printing on the next line, and the impression of the bottom line cannot be read

  • You're in private browsing mode, if you see "tools > stop private browsing", possibly gray
  • You enter private browsing mode, if you select: Firefox > Preferences > privacy > History: Firefox will be: "don't forget the story ever.
  • To view all the history settings, choose: Firefox > Preferences > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.

  See also:

  • Always start Firefox in a private browsing session

• Digital installation of certificates with the private key

  I installation of digital certificates in three servers, each of them with Windows Server 2012 R2 Standard but just in one of them, the private key information remain available after installation. The purpose of these servers is to secure the communication with an instance of SQL Server that is installed on each server

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.