Invalid SSL certificate

Similar Questions

• ACS 3.3 invalid or corrupted SSL certificate installed

  Hello

  I installed a new SSL certificate to replace the old one which was about to expire. After this update of cert, I can access is no longer the ACS server for admin purposes. I get the error "cannot establish connection cifered because the certificate presented by is invalid or damaged. Error code:-8101 "or something similar that the message is in Spanish.

  I tried to restart the CSAdmin service without success. I also watched ath the different CS tools but none of them does this nor is the Guide to GBA.

  Is there a way to remove the certificate from the command line or other?

  AY help would be appreciated because I don't want to reinstall/rebuild the server.

  Thank you

  Niels

  If the EC is 3.3.4 or below then it can be disabled through the registry. 4.x do not have registry settings to tweak.

  For 4.x

  A possible workaround we have is that if a GBA backup taken prior to activation of the HTTPS is there, we can restore the same and work around the problem.

  For 3.3.x

  To restore access using http on your server, you must change the registry setting

  to disable the https. Here's the location of the key "reg":

  HKEY_LOCAL_MACHINE \SOFTWARE \Cisco \CiscoAAAv3.2 \CSAdmin \Config \HTTPSSupport

  Change this value from 2 to 1.

  Kind regards

  ~ JG

  Note the useful messages

• How can I get Firefox re - check the websites ssl certificate? It gives me a message saying that my site's ssl certificate is expired at the time where it is not.

  My side ssl certificate has expired, but it was renewed a few days later. For more than a month it was renewed, but I still have Firefox users, the error of statement.

  This connection is Untrusted
  Technical details:
  Eng.fanpageengine.com uses an invalid security certificate.
  The certificate expired on 31/01/2013 15:59.

  This is a link to a 3rd party site that verifies that the ssl certificate is current.
  http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=HTTPS%3A%2f%2Feng.fanpageengine.com & Protocol = https

  I need the steps they will need to do Firefix update of its registration.

  Additional information.
  This isn't the effect everyone visiting my website using Firefox. It does seem that effect people who visited the site, although the ssl certificate has expired. However the clearing the cache and cookies have no effect.

  Thanks for the help.

  Thanks for all the help. I found a solution. =)

  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Firefox wrongly think that my site is using an invalid security certificate... clues?

  I recently installed a security certificate on my site.
  I tried different controllers of ssl and certificate seems fine.
  Firefox, however, don't like him and displays a warning page that says:

  www.Academi.pl uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is not approved.

  (Error code: sec_error_untrusted_issuer)

  This happens on Windows, Mac and Linux computers in my office.
  I also received a number of reports from users of the site who are experiencing the same problem.
  It seems that the problem does not occur in firefox 7.x, but I have to check properly.

  Anyone know a solution to this? I tried to remove the certificates manually in preferences, but it did not help.

  It worked for me! I had given up everything, but when I received this reply in my inbox this morning. I was skeptical at all first, think something so simple could not possibly solve all my problems... He did! Sometimes simple is best. Thank you all for the answers and help for this problem!

• Impossible to get websites to use respective SSL certificates

  Mac OS 10.10.5

  Server 5.0.15

  I have a question where the default web site ("Server (SSL) Web site" ") is in conflict with the SSL certificates for my three other SSL sites.

  The configuration of my website (Note: server IP is 192.168.1.100)

  • Web Server SSL (all IP addresses) site - cert for domain1.com (work)
  • Domain1.com (192.168.1.10) SSL - cert for domain1.com (work)
  • Domain2.com (192.168.1.20) SSL - cert for domain2.com (cert draws for domain1.com, invalid identity)
  • Domain3.com (192.168.1.30) SSL - cert to domain3.com (cert draws for domain1.com, invalid identity)

  My DNS records:

  • Primary area - Domain1.com
    • A: Domain1.com 192.168.1.10
    • NS: Domain1.com
  • Primary area - Domain2.com
    • A: Domain2.com 192.168.1.20
    • NS: Domain2.com
  • Primary area - Domain3.com
    • A: Domain3.com 192.168.1.30
    • NS: Domain3.com
  • Reverse zone - 1.168.192
    • PTR: 192.168.1.10 Domain1.com
    • PTR: 192.168.1.20 Domain2.com
    • PTR: 192.168.1.30 Domain3.com
    • NS: Domain1.com
    • NS: Domain2.com
    • NS: Domain3.com
  • Reverse zone - 100.1.168.192.in - addr.arpa
    • PTR: 192.168.1.100 server.domain1.com
    • NS: server.domain1.com

  Whatever the cert is selected for the default Web site apply to all SSL Web sites. The only way I can force everyone to use their respective certificates is to set the IP address of the Web site to be the same as the IP of the server (in this example 192.168.1.100). It works, but which prevents the work Profile Manager.

  I'm 99% sure that I have my DNS configured correctly (right now all a records point to 192.168.1.100 as a temporary solution), but I'm willing to take another look, if someone has a suggestion clearly and concisely. Ideally, each DomainX.com would have an IP de.10.20 et.30.

  So how can I do all three Web sites use different IP addresses AND their respective certificates? Is this possible?

  (I appreciate any suggestion at this stage. This question is impossible to find an answer anywhere on the internet after about 9 months of research).

  Solution for someone who comes looking for this problem!

  After talking to the Apple Enterprise support:

  The site services will assuming that you only have one certificate for all Web sites. Unless you want to really roll up your sleeves and get down and dirty with the Apache configuration files, you must have a valid certificate for all areas, you use AND give each site its own IP address.

  When configure you your certificate, the host name must look like this:

  Server.Domain1.com (this is the name of your common)

  *. Domain1.com

  *. Domain2.com, etc..

  I used a StartCom certificate class 2 IV SSL ($ 59 / year).

  Then, assuming you know how to import a verified certificate, use it for all services that need and all the websites you want course (why wouldn't you use https, anyway?)

• Failure of the conversion due to SSL certificate problems - can work around this problem?

  I began the process of migration of a collection of virtual machines in an environment of KVM to an existing cluster of vSphere and try to use the converter (5.5) do a dynamic conversion/migration of a Ubuntu box, but it does not reason create the virtual disk on one of the hosts because of the SSL certificate, and I found no other messages or articles specifically on this (looks like most associated with SSL include improving speed)

  In the worker newspaper, I can see that:

  • The converter is able to successfully create the target VM
  • The attempt to create the virtual disk is defective for the certificate SSL is not invalid (all systems in the cluster appear to be using default certificates from VMware).  In the log file of the worker:

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL_IsVerifyEnabled: failed to read the registry value. Falling back to the default behavior: verification on. LastError = 0

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL: SSL unknown error

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL: connection failed

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: The certificate of the remote host has these problems:

  ->

  -> * The host certificate chain is incomplete.

  ->

  -> * unable to get local issuer certificate

  2014-08 - 07T 09: 35:13.947 - 07:00 [info 06620 'Default'] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  • The goal of the virtual machine is removed.

  Is it possible to simply disable the validation of certificate for this process?  In the newspaper, it looks like a registry key that it would control, but I have not found any information on this subject (or guessed correctly).  Or can I import this certificate on the local Windows system running converter to get around it (I could not with this approach, but either)

  It's really not clear to me which system validation.  While the worker log shows it connect to the vSphere host, there is no such line indicating it connects to the host where the target VM is located, and it looks like this is the host with the certificate which is considered not valid.   Validation occurs not on my local system running the converter? (the parameters of the vCenter server shows that the box 'vCenter requires a verification of certificates SSL host' is unchecked already)

  Thank you

  Scott

  You might want to take a look at Re: an error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination and let me know if it works for you.

• View ssl certificate problem

  Hello

  I config the view to connect the server of ssl certificate, I have config ssl with the kb certificate

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1008705

  but when I configed the ssl certificate, I opened IE, open connect with https server.

  certificate is issued is not disabled certificate.how do?

  When I use the customer display to connect the server to connect, he invites "the host name in the certificate is invalid or does not match to.

  My way

  1. Add keytool for the path of the system:
  a. in your host server view connection or security, right-click workstation, and then click Properties.
  b. click on the Advanced tab.
  c. click on Environment Variables.
  d. in the Group of system variables, select path and click on modify.
  e. type the path to the JRE directory in the Variable value text box. For example,.
  < install_directory > \VMware\VMware View\Server\jre\bin.
  

  2. open a command prompt and run this command using keytool to generate a key file:

  keytool - genkeypair - keyalg 'RSA' - keysize 2048 - keystore keys.jks - storepass secret

  keytool - certreq-file certificate.csr - keystore keys.jks - storepass secret

  3. I asked the certificate with my CA certsrv in the field. I asked for the advanced certificate and copy the text file

  for example

  -----BEGIN NEW CERTIFICATE REQUEST-
  MIICrDCCAZQCAQAwZzELMAkGA1UEBhMCY24xCzAJBgNVBAgTAnNoMQswCQYDVQQHEwJzaDEQMA4G
  A1UEChMHdm1jbG91ZDEQMA4GA1UECxMHdm1jbG91ZDEaMBgGA1UEAxMRVk1DT04udm1jbG91ZC5j
  b20wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCNEbwcZeW + 5PNsRgk65lB4NQ1AMMTb
  HbtGRwQIbaBLgvUxZlfNucu7nckC6bdg3brXDRIbZp3vjQCpZLsHjNPmRGkoVRhwikEaOoou9UWA
  b + 0HScCMFZShkULCrAJV2nKuPuUl5JO3lRBecRBKiRm37yf53c9HYmh + nexQaz0dX + jfOm4M3fcg
  Ujfl + UAky9KOjMrHQ5MJjoTqZCV2uMpiGOaG8h/8kruEyISiSn89KOAgmA90Iq32SItA09pJG/V5
  GWbIUXSE5JUF70ZemdXN31dajmwXH0ML + SLEQfUjQeH1vGZ/v0nG51wIf5QOJTJ7pJ2aKEsaNcBz
  6PvjWcdpAgMBAAGgADANBgkqhkiG9w0BAQUFAAOCAQEABnjFSmKYINAvBJ4S1Hy5rnPdunaVcsQA
  y5WkVf7ouRIm7Zew2tjzr4KN2Xt41alJlLUtfpGfw5xqGSvZBxuxVltW5dEYRitf84trysdeQAuB
  t103qAchdBpziPAOumu2mk/PjW + kt/t0o5CuZ81vCD8/KB9KX94YW9vB83Q9B7Mkg3g3G7Clzyim
  Ogwq/VVErAu0udbW30Bp0RuSkj9CBwofpYsC + sdcVeduXV1vjpl4 + Fo + BWt1JkrT2aLkAJ4uhvzw
  V7vPmYlqpuauS79iZowU + uXir3F75GBxKYsWRXia5D/AiDRd/xLS9K62o2QnVjV7qpshIlv6IIzN
  MOLDzA is
  -NEW APPLICATION FOR CERTIFICATE OF END-

  I copyed the text in my ca server asked for the catificate

  4. when the certificate was requested, I download the certificate chain and export the certificate and the ssl certificate

  5 keytool - keystore viewcs1.jks - storepass password - importcert-alias rootca-folder rootca.der.cer

  6 keytool - importcert - keystore viewcs1.jks - storepass password - keyalg 'RSA' - trustcacerts-alias viewcs1-file viewcs1.der.cer

  7 copy the jks and the certificate of "\VMware\VMware View\Server\sslgateway\conf".

  8. create locked.properties and set the keyfile property

  keyfile = Keys.P12
  KeyPass = MY_PASS

  shops = jks

  9 restart connect services

  What is the problem? I'm doing this. I don't know the step that I did wrong.

  pls help me solve the problem.

  thansks much

  This problem is puzzle me long.

  I hope someone can provide the video

  My email: [email protected]

  When you created the certificate did you use namesake who would use people accessing VDI?  For example, if people acecss VDI with https://vdi.blank.com , then you would have to create your certificate using the same.

• Firefox for Mac does not recognize a valid SSL certificate

  Firefox for Mac does not recognize the SSL certificate that is valid for this site, I got: https://www.georgeglazer.com. It gives a warning "not reliable." However, the Firefox for Windows does not give a warning. This happens even if I clear the cache and it happens in the Mavericks and OS of Yosemite. The certificate is up-to-date and with Comodo. Firefox for Mac is now the only browser producing these errors (v. 39, put updated) - Internet Explorer, Safari and Chrome are not. Our hosting provider has said it's probably a browser issue, perhaps having to do with intermediate certificates in Firefox being obsolete. I really hope you'll solve the problem, as it's annoying for us when we're going to do right by our customers and pay for the SSL certificate. I have attached a picture of the warning and the other from what you see on a PC: a pop-up that says it is a verified SSL certificate and gives details about the issuer, the period of validity, etc.

  COMODO should you sent a link to download the file 'bundle' containing the intermediate certificates. Who needs to go in the same directory as the certificate of your site. If you are using a control panel, your host can probably help with this process. And if you bought through them, shame on them for not taking care of this for you already!

• How to accept a new ssl certificate in Thunderbird?

  7.15.15
  I can't get or send emails on my cell phone two days ago.
  - Neither the "Configuration Options for certificates" worked to bring in the certificate that I use that allows you to send and receive e-mail. Under the "Digital Signature" or "Encryption" when I press "Select" to select a certificate, I get the pop-up message "Certificate Manager cannot locate a valid certificate... ». When I press 'View certificates' certificate that I use is listed under 'Servers' and the 'authorities' and is up to date.
  -In addition, under Tools - Options - Advanced - certificates for: "when a server requests my personal certificate", I selected "Ask Me every time" and left "query OSCP responder servers to confirm...". ', the box is checked.

  I think that this problem is bound to accept a new ssl certificate has been recently renewed. I've never had this problem before. How to start accepting a new certificate?

  Thank you.

  No you can not communicate with the server using a common product of Mozilla. In a short while you will not be able to co interact with it with any product. The operator/administrator of the server needs to fix their server to issue certificates 1024-bit or better. Or stop using TLS.

  The best explanation of this change and it's because I've seen is here https://weakdh.org/
  (right at the bottom of the page is what you need to do stuff)

  In essence, that the server does not have a security flaw serious patched and Mozilla products have been modified to not interact with servers that have not corrected the vulnerability. Vulnerability leaves you open to man in the middle attack on piracy.

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• Thunderbird does not recognize a self-signed SSL certificate

  Dear support,

  I have a very strange problem that I don't understand.

  I run a server ISP offering IMAP and TLS/SSL HTTPS encryption. Both services use the same SSL certificate issued by RapidSSL/GeoTrust Server edward.ennabe.de

  When I open an https connection to the server, Firefox correctly solves the certificate chain and use the certification authority root Equifax (which is correct).
  However, when I try to connect to a mailbox via Thunderbird, all I get in the hierarchy of certificates is my server edward.ennabe.de. I don't think that it's "working as intended", or is it?

  Is something wrong with my Thunderbird or My Dovecot configuration? What is really strange that firefox recognizes it correctly.

  Thanks in advance

  Kind regards

  ZeroEnna

  In Thunderbird, click the 'Détails' tab in the display of the certificate.
  See all certificates of CA listed in the field "Certificate hierarchy" also installed in your Thunderbird certificate store?
  When checking this look for the tab 'authorities '.
  If there are no certificates listed in the missing chain in the Thunderbird certificate store (for some reason any), you can try to export it in Firefox and import them into Thunderbird.

• When I visit a site, firefox reports invalid security certificate, but does not add an exception

  When I visit a site that has an invalid security certificate, my mobile me has a nice little dialog box telling me that the connection is not reliable and allowing me to view the site by clicking on ""I understand the risks"my office however shows a completely different dialog box." It is a simple dialog with a title of "Alert" and said... use a security not valid certificate... I don't trust blah blah and an ok box so I can never continue on the site.

  You can see it at https://www.dropbox.com/s/su6fpyimwqk3f5x/Screenshot%202014-09-19%2014.13.01.png?dl=0

  I use Firefox 32.0.2 under 64-bit Windows 8.

  Suggestions will be welcome.
  Thank you
  Selwyn

  You can check the preferences of browser.xul.error_pages on the topic: config page.

  • Browser.XUL.error_pages.enabled = true

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• SSL certificate not used for Admin Server connections

  I have a GoDaddy SSL certificate installed on OS X Server 10.11.4. It works very well for the web server (https). Connection via Server.app off-site, produces a warning SSL and self-signed certificate. There is a related error regularly in newspapers:

  [[servermgr_certs]:-[CertsRequestHandler(KeychainOpenSSLExport) exportIdentity:]: SecKeychainItemExport (certificateChain) no certificate string available, defaulting to a cert leaves only

  Any suggestions? I reinstalled the cert...

  You must raise the.app of 3rd party certificate.  Follow these steps:

  1: Open Keychain Access.

  2: select the system Keychain in the keychains list.

  3: find the preference of identity com.apple.servermgrd and double click it.

  4: select your SSL certificate 3rd party in the contextual menu of preferred certificate.

  5: Press the button Save changes.  You will be asked to authenticate.

  6: restart the server or restart the process of servermgrd to activate the changes.

  Now when you connect to the server from a remote device using.app, sign in using your valid 3rd party SSL certificate and avoid mistakes.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store