"invalid token" error when recording account synchronization; No email

Similar Questions

• Camileo X 200 - alert "invalid" is displayed when recording

  Hello

  I have a screen of camcorder Camileo X 200 and if I record more 3 minutes or so of the video it says "Invalid" in red on a white background on the screen.

  If I put the memory card in the computer, there is a file on the card and its size corresponds to what how long I tried to register to see if I record 8 minutes, I get to roughly double what I get after registering for 4 minutes.

  I tried to play the files on the computer with different codecs and different actors to see if that helped, but nothing plays files creates the camera.

  Registration for a minute so everything goes well, the video and sound are there and everything seems, turns and sounds like I expect, it's only when I record more than 3 minutes of video that the problem occurs.

  I tried

  -different sizes from 1 to 32 GB memory cards
  -format cards in NTFS, FAT, and FAT32
  -cards on the camera of formatting
  -cards on different computers of formatting
  -remove the battery and the memory card and leave it for a week the depower
  -reset to factory settings

  It has been like this since I bought it. She was new in a sealed box and I would have returned it but the seller mysteriously disappeared and is unreachable. Any help would be appreciated.

  Thank you

  Hello

  I think that this alert means that the SD card is too low speed or contains corrupted files.
  The way to resolve these conditions is to format the SD card by the camcorder instead of PC

  In case this does not solve this problem, you must use the SD/SDHC or SDXC card that supports a record higher speed (upper class of SD card)

• Have a token error when deploying on vmware Simulator

  Hi all

  I followed the steps in the definitive guide for Air (mentioned in this forum) application.

  In my opinion, these measures were ok, I got the following output to the debugging token for example:

  BlackBerry-deploy - installDebugToken file.bar - device 192.168.66.131 - password mypassword
  Info: Send request: install Debug Token
  Info: Action: install Debugging token
  Info: File size: 2320
  result::success

  Apparently it's ok for the debugging token.

  Then I installed the app:

  BlackBerry-deploy - package file.bar - installApp-device 192.168.66.131 - password mypassword
  Info: Send request: install
  Info: Action: install
  Info: File size: 2320
  Info: installation...
  Info: Treatment 2320 bytes
  actual_dname::Debug. Token.gYABgFQjNgivrKdNwauBSByKQuM
  actual_id::gYABgFQjNgivrKdNwauBSByKQuM
  actual_version::0.0.0.1
  result::success

  It also seems ok for me. But when I try to start it fails:

  BlackBerry-deploy - package file.bar - launchApp-device 192.168.66.131 - password mypassword
  Info: Send request: launch
  Info: Action: launch
  Info: Launch of debug.token.gYABgFQjNgivrKdNwauBSByKQuM...
  result::invalid
  Info: done

  Too bad!

  I have no idea why this happened. I read once that he shouldn't no matter what token of debugging on the Simulator, but I couldn't find the command to uninstall mine.

  Moreover this debugging token info should appear in the Security tab in the Simulator as shown in the definitive guide, but it doesnot. (despite the deployment info says it's ok).

  Is that what someone has successfully installed an application on the Simulator? Yes of course. I have reviewed the steps and did not find the reason why it fails.

  Are the debugging token is really necessary? do you see anything wrong with the above commands?

  I can reboot all the steps from scratch, if not necessary, no problem. Any help is appreciated!

  Loïc

  PS: I am running on OSX

  It worked!

  

  Sorry for all these messages. At least, I hope it helps someone. In order to start with the siimulator, just start with the supplied first helloworld application.

  BlackBerry-Tablet-SDK-1.1.0/bin/BlackBerry-airpackager-paquet HelloWorld.bar HelloWorld - app.xml HelloWorld.swf blackberry - tablet.xml - devMode hello.png helloworld - splash.png

  BlackBerry-airpackager HelloWorld.bar - installApp - launchApp HelloWorld - app.xml HelloWorld.swf - device 192.168.66.131 - password mypassword

  replace the IP address of the device with yours, even for the password.

  so easy right? I did the same thing for my application and it also works!

  the problem is the file bar. I don't know why some people talking about the to do all the bar signature of process, etc. for the Simulator. Only 2 commands are quantity.

  happy coding!

  L

• We get a "invalid number" error when the Xref database of fill

  Hi all
  
  My table (XREF_DATA) target has the following parameters and its respective data types: -.
  
  XREF_TABLE_NAME
  XREF_COLUMN_NAME
  ROW_NUMBER
  VALUE
  IS_DELETED
  LAST_MODIFIED
  LAST_ACCESSED
  
  All are varchar2
  
  But when I am executing the interface and observing the results then this error pops up:-1722: 42000: java.sql.SQLException: ORA-01722: invalid number to the stadium
  Insert flow I$ Table(I$_XREF_DATA)
  
  I used CKM, LKMSql for Oracle and the incremental update of the IKM Oracle)
  
  
  My target table has all the varchar2 data type, then why it gives this error number invalid?
  
  
  
  Kind regards
  Sourav

  Hello

  You can copy the SQL code generated by ODI (for the stage which gives this error) and then try to run it through any SQL client like toad / developer sql etc.
  This will help you find erroneous data.

  Also is LAST_MODIFIED and LAST_ACCESSED have as VARCHAR2 data type? The name it seems that it is lying do DATE.

  Thank you
  Fati

• Get the error when recording video and audio in windows 7 32-bit?

  Dear support,

  ERROR: recovery of the class factory COM for component with CLSID {632B606A-BBC6-11D2-A329-006097C4E476} failed due to the following error: 80040154

  I programmed an application based on windows using VB.net using windows media encoder 9 series for the screenshot of desktop and audio. and its working properly in windows 7 64 bit. But when it comes to the program 32 bits windows 7 will not run correctly. the reason behind this is code mentioned below

  "Encode = New WMEncoderLib.WMEncoder" when I'm creating application object get out automatically, this only happens with windows 7 32 bit os please help me to solve this problem I get 4 days struct. "."

  Hi Brice,.

  I suggest you to ask your question in the MSDN forums. We have experts who can help you with issues related to the applications developed.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

• -You also get an invalid identifier error when executing this query sql for a data model, but not in TOAD/SQL Developer?

  Hello OTN.

  I don't understand why my sql query will pass by in the data model of the BI Publisher. I created a new data model, chose the data source and type of Standard SQL = SQL. I tried several databases and all the same error in BI Publisher, but the application works well in TOAD / SQL Developer. So, I think it might be something with my case so I'm tender hand to you to try and let me know if you get the same result as me.

  The query is:

  SELECT to_char (to_date ('15-' |)) TO_CHAR(:P_MONTH) | » -'|| (To_char(:P_YEAR), "YYYY-DD-MONTH") - 90, "YYYYMM") as yrmth FROM DUAL

  
  

  Values of the variable:
  

  : P_MONTH = APRIL

  : P_YEAR = 2015

  I tried multiple variations and not had much luck. Here are the other options I've tried:

  WITH DATES AS

  (

  Select TO_NUMBER (decode (: P_MONTH, 'JANUARY', '01',))

  'FEBRUARY', '02',.

  'MARCH', '03'.

  'APRIL', '04'

  'MAY', '05'.

  'JUNE', '06'.

  'JULY', '07',.

  'AUGUST', '08'.

  'SEPTEMBER', '09'.

  'OCTOBER', '10',.

  'NOVEMBER', '11'.

  "DECEMBER", "12."

  '01')) as mth_nbr

  of the double

  )

  SELECT to_char (to_date ('15-' |)) MTH_NBR | » -'|| (TO_CHAR(:P_YEAR), 'DD-MM-YYYY') - 90, "YYYYMM")

  OF DATES

  SELECT to_char (to_date ('15-' |: P_MONTH |)) » -'|| ((: P_YEAR, 'MONTH-DD-YYYY')-90, "YYYYMM") as yrmth FROM DUAL

  I'm running out of ideas and I don't know why it does not work. If anyone has any suggestions or ideas, please let me know. I always mark answers correct and useful in my thread and I appreciate all your help.

  Best regards

  -Konrad

  So I thought to it. It seems that there is a bug/lag between the guest screen that appears when you enter SQL in the data model and parameter values, to at model/value data.

  Here's how I solved my problem.

  I have created a new data model and first created all my settings required in the data model (including the default values without quotes, i.e. APRIL instead "Of APRIL") and then saved.

  Then I stuck my sql query in the data model and when I clicked ok, I entered my string values in the message box with single quotes (i.e. "in APRIL' instead of APRIL)

  After entering the values of string with single quotes in the dialog box, I was able to retrieve the columns in the data model and save.

  In the data tab, is no longer, I had to enter the values in single quotes, but entered values normally instead, and the code worked.

  It seems the box prompted to bind the values of the variables when the SQL text in a data model expects strings to be wrapped in single quotes, but no where else. It's a big headache for me, but I'm glad that I solved it, and I hope this can be of help to other institutions.

  See you soon.

• "Invalid certificate" error when you try to access the internet.

  Original title: invalid certificate XP 2001

  New computer shop, so using old XP 2001.  Can get internet, but sign CERTIFICATE INVALID keeps popping up.  What should I do?

  Two conditions that can cause this.  One is that your computer is on the wrong date or duration.  Verify that your correct time zone is set on your computer and the date / time is within 5 minutes of the correct time.

  Second, you need to maybe old certificates that need to be updated.  Go to the following site:
  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  and click on the link in the paragraph "Root Update Package (designed for Windows XP only)".  After you download the update, double-click it to install it.

  HTH,
  JW

• Error when trying to send an email or send messages in Windows Mail: the connection to the server has failed-0x800ccc0e

  emailing photos

  When I try pictures by e-mail, or send messages through the windows messaging, I get this message: the connection to the server has failed.  Subject ' emailing: Hello ' account 'imap', Server "att.net" protocol: smtp, port: 25 secure (ssl): No. ' socket error: 10060, error number: 0x800ccc0e.  Is it because I have hotmail?

  See:

  You cannot configure Windows Mail to use an e-mail account on the Web (HTTP) on a computer that is running Windows Vista
  http://support.Microsoft.com/kb/926374

  The article above, that you cannot use windows mail with hotmail and the other email account based on the web.

  Also check these:

  http://www.Vistax64.com/Vista-mail/138137-unable-send-emails-connection-server-has-failed.html

  http://www.Vistax64.com/Vista-mail/147340-connection-server-has-failed.html

• error when I try to send email

  OK, I promise you that this will be the last time for a while, I turn to you guys for help.

  I am trying to connect to an external smtp server using the bytearray class:

  var myMailer:SMTPMailer = new SMTPMailer ('outbound.mailhop.org', 2525);

  myMailer.authenticate ('password' 'login'( )

  myMailer.addEventListener (SMTPEvent.MAIL_SENT, onMailSent);

  / / event sent when the mail could not be sent

  myMailer.addEventListener (SMTPEvent.MAIL_ERROR, onMailError);

  / / event sent when SMTPMailer is correctly connected to the SMTP server

  myMailer.addEventListener (SMTPEvent.CONNECTED, onConnected);

  / / event sent when SMTP server has disconnected the client for different reasons

  myMailer.addEventListener (SMTPEvent.DISCONNECTED, onDisconnected);

  / / event sent when the client is successfully authenticated

  myMailer.addEventListener (SMTPEvent.AUTHENTICATED, onAuthSuccess);

  / / event sent when the client is unable to authenticate

  myMailer.addEventListener (SMTPEvent.BAD_SEQUENCE, onAuthFailed);

  myMailer.sendHTMLMail ( " ""[email protected]"""" " "[email protected]"" ", "test smtp" "< br > < b > HTML photo :) < /b >");

  It seems to connect very well, but when I try and send the email, this is the error I get:

  554 SMTP synchronization error

  I have never seen this error before, and when I try and google it it not is really not much info on what causes the problem or how to fix it.

  I've left speechless you guys before, but I hope that this is not one of these issues!

  Thank you

  Jorge

  Okay, that was weird. When I tried another smtp server, it seems fine. I think that the previous smtp Protocol wanted to use the ssl connection. Thanks for your help! _

• account synchronization check email contains empty URLs

  I'm moving again sync with Firefox 29, but when you set up the verification email links to http:// sync account

  For any help or suggestions appreciated.

  Jim

  Hello

  I'm sorry you have encountered this problem. It seems that this is a problem with Outlook, and we are aware of the bug. See: URL empty in Outlook

  I would recommend trying to open e-mail with e-mail software different while the engineers to solve the problem.

  Thanks for your patience,
  Ibai

• I have a 10060 on Vista winsock error when trying to send an email to Optonline with the Windows Messaging client.

  have an error 10060 on Vista winsock tries to send an e-mail to Optonline with the Windows Messaging client.  Check the usual suspects, port 25, addresses seem to be good.  I really remove the tcp/ip stack or change the registry?  It's only outgoing mail that creates errors.  Any suggestions?

  Hello AndySealfon,

  I suggest watching this Microsoft article:
  http://support.Microsoft.com/kb/811087
  Try troubleshooting steps one and two, and let us know if your problem is solved.

• VCB: Another error occurred: at line number 7, not well formed (invalid token)

  I get the error message:

  2009-06-12 17:10:00.795 "vcbMounter" error of 2284 Error: Another errorencountered: line number 7, not well formed (invalid token)

  When I use the vcbMounter.exe (the same with vcbVmName.exe) of the VCB Proxy with the option "-a name: vm - name", since last week.

  With "- an ipaddr:vm - name ' it works well. We did not updates or upgrades at this time.

  Maybe a problem with a special character in the name or description of a virtual machine, but I can't find it.

  In the Victoria Cross are more than 1000 VM. Can anyone give me a tip how to find this character, or is there a differnet solution?

  Thank you very much

  Guenter

  Hello

  If you have a special character in the vmname, try with escape character.

  -@m!t

• "APP-OFA-48289: unknown error when creating control systems (immobilization).

  Hello
  
  I have problem
  
  Navigator: Fixed Asset Manager > Setup > system > control systems
  
  When I tried to create in the system controls are error message:
  
  "APP-OFA-48289: unknown error." Please contact your system administrator. »
  
  
  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g
  
  
  Thank you
  
  Escaline

  Navigator: Fixed Asset Manager > Setup > active system > system controls

  When I tried to create in the system controls are error message:

  "APP-OFA-48289: unknown error." Please contact your system administrator. »

  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g

  Please see (APP-OFA-48289 unknown error when recording data in system controls form FAXSUSTL.) [ID] 966382.1).

  Thank you
  Hussein

• Get the error when inserting

  I get an "invalid Character" error when I m doing the insert operation foll: -.
  
  insert into rp_rpt_sql
  Select '1', '6000100', ' 1 ', ' 1',' insert into rn_rpt_data (dt, rpt_id, rpt_row_id, rpt_col_id, col1, col2, col3, col4, col5, col6, col7, col8, col9, col10)
  Select "#as_on_dt #", 6000100, 1, 1, sr_no rownum, v.*
  Of
  (
  Select e.IECD, (e.IMPORTER_NAME |') '|| e.IMPORTER_ADDRESS), (e.IMP_LIC_NO |') '|| e.IMP_LIC_DT), e.IMP_ITEMS, e.IMP_REMIT_DT, e.IMP_REMIT_AMT_CCY_ID, e.IMP_REMIT_AMT_CCY, e.IMP_REMIT_AMT_RS, e.REM
  of e rm_bef
  where e.as_on_dt = ' #as_on_dt # '.
  and e.bef_default_id = '1'
  and e.cust_type = '2'
  ) v ',' select rownum "Sr_No", (IMPORTER_NAME + IMPORTER_ADDRESS) "Name and address of the importer", (IMP_LIC_NO + IMP_LIC_DT) 'no. and the date of any import licenses,"IMP_ITEMS 'Brief Description of goods', IMP_REMIT_DT 'Date of reimittances', IMP_REMIT_AMT_CCY_ID 'Currency', 'Amount' IMP_REMIT_AMT_CCY, IMP_REMIT_AMT_RS 'Rupee equivalent', rem"remarks ".
  Of
  (
  Select e.IECD, (e.IMPORTER_NAME |') '|| e.IMPORTER_ADDRESS), (e.IMP_LIC_NO |') '|| e.IMP_LIC_DT), e.IMP_ITEMS, e.IMP_REMIT_DT, e.IMP_REMIT_AMT_CCY_ID, e.IMP_REMIT_AMT_CCY, e.IMP_REMIT_AMT_RS, e.REM
  of e rm_bef
  where e.as_on_dt = ' #as_on_dt # '.
  and e.bef_default_id = '1'
  and e.cust_type = '2'
  )' double where does not exist (select 1 from rp_rpt_sql where rpt_id = 6000100);
  
  Kindly help!

  No no not a clue on what you're trying to achieve I just used for the two sqls q rating because they represent for sure an invalid string (single "in literal)

  insert into rp_rpt_sql
  select '1',
         '6000100',
         '1',
         '1',
         q'[insert into rn_rpt_data (dt,rpt_id,rpt_row_id,rpt_col_id,col1,col2,col3,col4,col5,col6,col7,col8,col9,col10)
            select '##as_on_dt##',6000100,1,1,rownum sr_no,v.*
              from (select e.IECD,
                           (e.IMPORTER_NAME||' '||e.IMPORTER_ADDRESS),
                           (e.IMP_LIC_NO||' '||e.IMP_LIC_DT),
                           e.IMP_ITEMS,
                           e.IMP_REMIT_DT,
                           e.IMP_REMIT_AMT_CCY_ID,
                           e.IMP_REMIT_AMT_CCY,
                           e.IMP_REMIT_AMT_RS, e.REM
                      from rm_bef e
                     where e.as_on_dt = '##as_on_dt##'
                       and e.bef_default_id = '1'
                       and e.cust_type = '2'
                   ) v
         ]',
         q'[select rownum "Sr_No",
                   (IMPORTER_NAME+IMPORTER_ADDRESS) "Name and address of the importer",
                   (IMP_LIC_NO+IMP_LIC_DT) "No. and date of import licenses if any",
                   IMP_ITEMS "Brief Description of goods",
                   IMP_REMIT_DT "Date of reimittances",
                   IMP_REMIT_AMT_CCY_ID "Currency",
                   IMP_REMIT_AMT_CCY "Amount",
                   IMP_REMIT_AMT_RS "Rupee Equivalent",
                   rem "Remarks"
              from (select e.IECD,
                           (e.IMPORTER_NAME||' '||e.IMPORTER_ADDRESS),
                           (e.IMP_LIC_NO||' '||e.IMP_LIC_DT),
                           e.IMP_ITEMS,
                           e.IMP_REMIT_DT,
                           e.IMP_REMIT_AMT_CCY_ID,
                           e.IMP_REMIT_AMT_CCY,
                           e.IMP_REMIT_AMT_RS,
                           e.REM
                      from rm_bef e
                     where e.as_on_dt = '##as_on_dt##'
                       and e.bef_default_id = '1'
                       and e.cust_type = '2'
                   )
         ]'
    from dual
   where not exists (select 1
                       from rp_rpt_sql
                      where rpt_id = 6000100
                    )
  

  Concerning

  Etbin

• "Security error" when setting 'Microsoft Exchange Hosted Services' Exchange account (user in company)

  I am a user in a company with a very large company that actually uses Microsoft Hosted Exchange services hosted by Microsoft employees in their facilities.  I called Palm support and they were clueless and zero help.  The lady pointed me to some Palm article I had already read and only remotely had nothing to do with my problem.  I don't see anything about this error message in the forums and google searches. Sprint has even replaced my other reasons palm pre, and the same error occurs once I configured the exchange account. I also see the error when I set up my account on my pixi nine wives. Our pre and pixi have already exchange accounts set up with success on our phones that are hosted by sherweb. Sherweb's exchange accounts work fine. I tried to set up this account of microsoft hosted exchange 5 - 6 times with the same result. He accepts my configuration information and adds to the list of email accounts available in the meadow. However, it keeps popping up the message stating "error of security policy:"Exchange..." Tap for details"(with a yellow exclamation point). Then he said "Security policy error" the Exchange (first part of my email address) account is disabled because it is impossible to define security policies. "'Leave this option disabled' or 'delete account '. I know that something does not work because it applied a policy of password or PIN on my phone which is not necessary, unless the account has been added. I can also see it in the "Mobile devices" section of outlook web when I login. This is the place in web outlook where you can see the last time the device synchronized, if remote, you can wipe the phone etc. If anyone has an idea how to solve my problem please post. Any ideas? I'm fresh out of ideas on this issue and very frustrated by the Palm developers. Just another example of evil-development and practical tests by Palm. I hope they correct this problem on later versions, but I'm only slightly optimistic that they will never get this medium of exchange e-mail at the level necessary for the support of large corporations. What I know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and an iPhone 3GS (confirmed by the other coworks who have set up their phones using our Exchange services). Accordingly, I have no choice but Palm to blame for this problem instead of Microsoft. Please, Palm fully support microsoft exchange e-mail users!

  After a lot of research on the subject, here is my point of view on the State of support for MS Exchange @ Palm and other companies.

  Unfortunately, Palm Pre and Pixi, WebOS is not fully supported Microsoft Exchange.  This has led to numerous reports of frustrated customers and countless hours of time wasted by consumers and technical support trying to figure out how to connect these Palm devices to the MS Exchange e-mail servers.  Way to go Palm!  Provide support for all the free email accounts worldwide and decide not to develop a product that is able to support your most rich and more influential-based email clients.  These are the people who are most likely able to spend more money on your mobile products or make decisions for companies that are able to buy huge amounts of smart phones.  Way to go guys!  Penny wise and dollar foolish if you ask me!  Palm supports only partially a handful of MS Exchange security policies.  They document what they take in charge, but they do a very poor job of documenting or even explain the limitations of the software.  Their States of documentation that the security policies that are not supported will not be applied and that users will still be able to connect to the exchange server.  This is certainly not true based on the reported error and other similar user reports.  Here is how iPhone and Palm compare in regards to the support of MS exchange security policy.  Notice in the quotes below the iPhone supports the policy of 'require the encryption of devices' which is very probably used by your greater and more security conscious companies or Government institutions.  I'm sure that Palm's inability to support "device encryption" is why I get this error, even if I have really no way to prove it at the present time.  Come on Palm, if you go to support full POP3 and IMAP, you must provide the full support of the binding protocol and political security by Microsoft Exchange product.  Here is the comparison between iPhone and Palm WebOS:

  ' Said the site of Apple, the iPhone supports the camera allow, password enabled, allow a Simple password, alphanumeric password, Password Expiration, history of password, Maximum password attempts failed, minimum password length, maximum idle lock, policy, Minimum refresh interval complex character devices. ", require manual synchronization while roaming and - in iPhone OS 3.1 only - require Device Encryption". (13 security policies)

  "Palm Web site says its WebOS 1.1 and later support active password, alphanumeric password, password history, Maximum password attempts failed, maximum length password, lock of inactivity maximum, Minimum peripheral characters complex and Password Recovery." (8 security policies)

   

  Windows Mobile 6.1 supports all THE policies.

  BlackBerry does not support the EAS (MS Exchange)

  Google's Android is not compatible EAS (they may have recently released some support but not full)

  Conclusion: If you want a mobile device that fully supports MS Exchange, buy something that is running Windows Mobile 6.1 (or higher) or even an iPhone 3 g (or more).  At least, until Palm decides they want to throw a development more $$ to support Microsoft Exchange E-mail to enhance their level of support.

  Reference: "how to avoid the lie of the foreign exchange policy by smartphone' http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004?page=0, 1

  Message edited by morgan1112 on 12/01/2010 15:00