Invalid user authentication

Hello

I'm on IOM 9102 + Websphere, I ran the patch_websphere and redeploy the .ear file. But now when I try to connect to the IOM, his throw invalid user authentication and I am not able to connect to the IOM. When I enter the password, its not taking the password and the cursor goes back to the user name text box.

Thank you
Suren

This means that it is already disabled. To check, from the command line, run the following:
wsadmin - port NONE

This will connect you to the websphere administration tool. Next type:
securityoff

This will stop the security that allows you to connect with any username and password. Restart WebSphere.

From this point you must enable security. Follow these steps:
-Once WebSphere returns upwards, connect with any what user name and password in the console of websphere.
-Access security--> user records--> custom
-Enter the user name "XELSYSADM" and then make sure to ignore case is marked
-Enter the password xelsysadm for "Server User Password"
-Click 'OK' and 'Save' in the master configuration.

I don't have a console of websphere that I have, but this will allow security for the application again. Restart and see what happens.

-Kevin

Tags: Fusion Middleware

Similar Questions

Analytics of obiee connection cannot get invalid user name and password

Hi people,
I am unable Loing analytical Obiee, get the valid user name and password when check the server log file do the sub questions.
Authentication failed: invalid user/password.
[2015 02-03 T 12: 13:52.000 - 05:00] [OracleBIServerComponent] [ERROR] [] [] [host: biapps.anblicks.com] [nwaddr: 192.168.100.112] [tid: dd8d8700] [ecid: 0053YdzsPuVEkJWzLwVK8A0006cE000000, 0:7210:6] PolicySet invalid: WSM-06102 PolicyReference reference URI "oracle/no_authentication_service_policy" is not valid.
I am able to login on console and em with the same user name and password.
Could any advice how to solve this problem.

The problem is solved by rebooting my server linux...

Connection of the user authenticated to the external proxy
Hi Experts,

I created an externally authenticated user in the database. And can connect without a password with the syntax below.

SQL > connect / @TESTDB
Connected.
SQL > show user;
The USER is 'SCOTT '.

That user scott has a power of attorney to an another DBuser PROXY_USER authorization.
I got the syntax but that works only from BONES of the database.

sqlplus [proxy_user].
SQL * more: Production version 11.1.0.6.0 on Mon 15 Nov 16:28:47 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Release 11.1.0.6.0 - 64 bit Production

I can log in as a user authenticated outside windows CLIENT running on Release 10.2.0.1.0

SQL > connect / @TESTDB
Connected.

But the syntax of connectivity above Proxy fails with below the CUSTOMER

SQL > connect [proxy_user] / @TESTDB
SP2-0306: invalid Option.
Usage: CONN [ECT] [connection] [AS {SYSDBA |}] SYSOPER}]
where < logon >: = < user > [< password >] [@ < connect_identifier >] | /

But works the same syntax of database OS!

I can connect to TOAD, but can not connect from SQLDEVELOPER or SQLPLUS

My sqldeveloper version is:

Version 2.1.1.64
Build a HAND - 64.45

and sqlplus:
SQL * more: Release 10.2.0.1.0

Any idea?

Thank you.

Published by: najet November 18, 2010 15:09
Hi najet

If you get SQLPLUS work SQLDeveloper (thickness jdbc/oci/instant customer) is definitely worth a try.

I don't know what the problem with your configuration of the proxy usecases that I am familiar are:
Through the UI SQLDeveloper

There are two ways to make proxy connections:
where p1 is user proxy and c1 is a client of the proxy:

method 1/single session (if no 2nd password or unique name required)
Main connection popup
user: p1 [c1]
password: p1

2/two method session
Main connection popup
user: p1
password p1

context connection authentication

client proxy: c1
no password or unique name

-Turloch
Team SQLDeveloper

BlackBerry smartphones "the application cannot be processed until multiple pending user authentications are resolved (error Id: 40831).

I tried to login to my account to update to Windows Live Messenger and got this error message. What should I do to correct this? I have not attempted to identify some time, so I'm afraid it says "multiple pending user authentications.

According to me, whereas it has proved to be a problem of Blackberry App World (or BB in general). A battery lawn mower folding to solve the problem... Thanks for your suggestion though

VPN3002 PAT-Mode and individual user authentication

Hi all

I have three questions about the VPN3002 connected to a VPN3005 in the PAT mode

and with authentication of the individual user.

First of all:

Is it possible to use this function for several users to the

private LAN.

Because I tried this, but when we the second user has been authenticated one could not work more.

Second:

When we first meet is YES, can be the users in a group of dispute as the

VPN3002 Client it self?

Third:

That is, when there is a router between the local private network and users?

Because the field of authentication of user appears only when users

are directly connected to the private lan.

I tried with PAT, but this was not possible because the VPN3002 can

different users.

I think that it will be possible with NAT, but then I ran to my first question.

concerning

Karlheinz

1 > it is the main function of the user authentication feature see here:

http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3002/3_5/get_star/gs1under.htm#xtocid13

2 > users cannot be in the other group. Group is dependent of the what the 3002 cumulates in.

3 > it wouldn't send other subnets connected to the private sector. The design of the 3002 is such that only the subnet behind it, is what it can do vpn for.

Kind regards

User authentication with AD Director

Hey!

Am having a problem with the management groups.

I try to make external authentication with users of the AD but fails with one: user authentication failed: Eric: no group admin

Everything seems fine, political authorization, Menu access, liaison group AD with ISE Super Admin to access the data group

My user is ok on AD (not locked, expired, or anything)

Anyone had this problem before?

THX

Possibility of vice.

CSCud31796 ISE - External RBAC fails if Member user from the group containing the apostrophe

Symptom:

RBAC using a storage of external identity (AD, LDAP) group mapping fails for a correct user with the groups to access the GUI of the ISE. The following message will appear:

"User authentication failed: username: admin group.

Conditions:

The user is a member of a group that contains the apostrophe character.

Workaround solution:

There is no work around in ISE.

1 rename all groups in the external identity store such that they do not contain apostrophes

2 remove users participating in the administration of all external groups containing apostrophes ISE

Jatin kone
-Does the rate of useful messages-

TimesTen - 7001: user authentication failed when using XLA

I installed TimesTen 11.2.1.8.0 on AIX 5.3 System.* user 'oracle '. I created another user of the application 'risk' to use in my application with TimesTen.
When running my application with the user 'risk' to connect with TimesTen it is OK. But when I want to use the XLA feature, when I call the createDurableSubscriber function, it returns the error
javax.jms.JMSException: failure of SQLDriverConnect (XlaCommon.c, line 48): S1000 7001 [TimesTen] [driver ODBC of TimesTen 11.2.1.8.0] TT7001 [TimesTen]: user authentication failed - file "db.c", lineno 9722, procedure 'sbDbConnect '.
It is strange that if I switch to user 'oracle', it works fine.
Can someone please help understand the reason why.
Thank you

You created the user 'at risk' within your TimesTen database?

CREATE a USER risk IDENTIFIED BY 'some password'?

You granted the privilege of the user risk to use XLA?

XLA GRANT at risk;

Have you used this user name and password in the JDBC URL when connecting to the database application JMS/XLA?

The 'oracle' user is probably your admin user of the instance (which is the database root) and therefore can use all the features without special action (but of course you never run application as that user).

Chris

ORA-01747: invalid user.table.column... on the REPLACEMENT notice

Oracle 11g Release 2

I run an UPDATE statement. In the 'set' I am trying to update a column by using a subquery on the right side. REPLACE the statement Gets the error ORA-01747: specification of invalid column, table.column, or user.table.column.

create table tab1
( file_id   number  ,
  record_id number  ,
  part_type_id number ,
  part_number  number ,
  positon_id   number ,
  notes        varchar2(255) ,
  mapped       varchar2(1) default 'N'
)
/
insert into tab1 values(1,1,123,777,1,'NEW|A/C COMPRESSOR KIT','N') ;
insert into tab1 values(1,2,123,777,2,'REMAN|A/C LINE','N') ;
insert into tab1 values(1,3,123,777,2,'TEST NOTE','N') ;
commit;
select * from tab1;
/*
  FILE_ID  RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID NOTES                     MAPPED
--------- ---------- ------------ ----------- ---------- ------------------------- ------
        1          1          123         777          1 NEW|A/C COMPRESSOR KIT         N
        1          2          123         777          2 REMAN|A/C LINE                 N
        1          3          123         777          1 TEST NOTE                      N
*/


DECLARE
   v_note2 varchar2(255) := 'NEW' ;
BEGIN
UPDATE tab1 t 
         SET 
          , t.notes =  (select REPLACE(t.notes,v_note2,null) 
                        from dual )
      WHERE t.file_id = 1         -- value comes from another source
      AND   t.part_type_id = 123  -- value comes from another source
      AND   t.part_number = 777   -- value comes from another source
      AND   t.position_id = 1  ;  -- value comes from another source
END ;
/

ERROR at line 3:
ORA-01747: invalid user.table.column, table.column, or column specification

Here's what the end result should be:

  FILE_ID  RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID NOTES                     MAPPED
--------- ---------- ------------ ----------- ---------- ------------------------- ------
        1          1          123         777          1 |A/C COMPRESSOR KIT            N
        1          2          123         777          2 REMAN|A/C LINE                 N
        1          3          123         777          1 TEST NOTE                      N

Hello

orclrunner wrote:

Oracle 11g Release 2

I run an UPDATE statement. In the 'set' I am trying to update a column by using a subquery on the right side. REPLACE the statement Gets the error ORA-01747: specification of invalid column, table.column, or user.table.column.

create table tab1
(file_id number,
number of record_id,
number of part_type_id
number of PART_NUMBER,
number of positon_id
Notes VARCHAR2 (255),
mapped by default varchar2 (1) ' don't
)
/
insert into tab1 values (1,1,123,777,1,'NEW |) Kit COMPRESSOR / it, ' don't);
insert into tab1 values (1,2,123,777,2,'REMAN |) A/C LINE ',' don't);
insert into tab1 values (1,3,123,777,2, 'NOTE of TEST', ' don't);
commit;
Select * from tab1;
/*
FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID MAPPED NOTES
--------- ---------- ------------ ----------- ---------- ------------------------- ------
1 1 123 777 1 NEW | A/C COMPRESSOR KIT N
1 2 123 777 2 REMAN | A/C LINE N
1 3 123 777 1 TEST NOTES N
*/
DECLARE
VARCHAR2 (255) v_note2: = "NEW";
BEGIN
Tab1 t UPDATE
SET
t.notes = (select REPLACE(t.notes,v_note2,null)
the double)
WHERE t.file_id = 1 - value comes from another source
AND t.part_type_id = 123 - value comes from another source
AND t.part_number = 777 - value comes from another source
AND t.position_id = 1; -value comes from another source
END;
/
ERROR at line 3:
ORA-01747: invalid column, table.column, or user.table.column specification

Here's what the end result should be:

FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID MAPPED NOTES
--------- ---------- ------------ ----------- ---------- ------------------------- ------
1 1 123 777 1 | A/C COMPRESSOR KIT N
1 2 123 777 2 REMAN | A/C LINE N
1 3 123 777 1 TEST NOTES N

The comma after SET is a syntax error.

Why you use double? Why not just

UPDATE tab1

SET of notes = REPLACE (notes, v_note2)

WHERE file_id = 1

...

CDR-20002: invalid user
IM owner of the schema but I can't access it Designer,.
I'm prompted for my channel user, pass, and connections and I can't access.
the scheme is on a remote server, here at the office...
I get this error msj:

--------------------------------------------------------------------------------
Message
CDR-20002: invalid user

Cause
Logged in as a user that is not a valid user in the repository.
--------------------------------------------------------------------------------

I tried Googling by the error number but no success.

What should I do?
Please
mabye you forgot created public synonyms of the old database table_owner is REPOS_MANAGER,.
Here's the sql to run the old db:

SELECT "CREATE A PUBLIC SYNONYM ' | synonym_name | "FOR" | TABLE_OWNER | '.' || synonym_name | « ; » Of
dba_synonyms owner WHERE = 'PUBLIC' AND table_owner = '& TABLE_OWNER ";

Invalid user ID
Hello

I am using the application designer to connect to a database of the PS Financials 9.1 (2 levels). I use the default people/peop1e and VP1/VP1.
When I try to connect with a customer of level 3, everything works fine, but when it connects directly to the database (Oracle 11 g 2) I get "Invalid User ID and password for the access code.
I can connect as peple/peop1e via sqlplus and VP1 user is not locked.
I also looked around to find that the re-run of the connect.sql and the grant.sql script could do the trick - not in this case unfortunately.

There is a problem, I've observed and I don't know what the problem is when I run the script to grant the specified tables are not available for the 'people' to access:
```
[oracle@vm-psfin91-db unix]$ sqlplus sysadm/SYSADM@FC91DB

SQL*Plus: Release 11.2.0.1.0 Production on Tue Sep 21 14:18:42 2010

Copyright (c) 1982, 2009, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> grant select on PSSTATUS to people;
grant select on PSOPRDEFN to people;
grant select on PSACCESSPRFL to people;
commit;

Grant succeeded.

SQL> 
Grant succeeded.

SQL> 
Grant succeeded.

SQL> 
Commit complete.

SQL> connect people/peop1e@FC91DB
Connected.
SQL> select * from PSSTATUS;
select * from PSSTATUS
              *
ERROR at line 1:
ORA-00942: table or view does not exist


SQL>
```
I think that this could be the problem I have to solve - granting select permissions for 'people '.
Any help is appreciated.
Thank you
Honza
Could someone please confirm this behavior? The client alias must match the database SID for application designer you can connect to 2 levels... Thank you.

The customer tnsnames.ora file must have an entry according not not the SID, but the DBNAME in table PSDBOWNER.
It is one of the first test when a connection of two levels: "SELECT OWNERID OF THE PS. PSDBOWNER WHERE DBNAME =: 1 "(coincent: 1 étant la base de données nom dans l'écran de démarrage)."
A few months ago I wrote articles describing the connectivity, and it is one of the essential:
http://Gasparotto.blogspot.com/2010/03/PeopleSoft-database-connectivity-part.html

Nicolas.

Why this error ORA-01747: invalid user.table.column, table.column or colu
Hello

Run immediately is to give different results
```
SQL>  declare
  2   v varchar2(30):='SAL';
  3   Begin
  4   execute immediate 'update emp set :1=1000 where empno=7900' using v;
  5   end;
  6   /
 declare
*
ERROR at line 1:
ORA-01747: invalid user.table.column, table.column, or column specification
ORA-06512: at line 4
```
But,
```
SQL> declare
  2  v varchar2(30):='SAL';
  3  Begin
  4  execute immediate 'update emp set ' ||v||'=1000 where empno=7900';
  5  end;
  6  /
old 7900 new 7900

PL/SQL procedure successfully completed.
```
Can someone kindly explain to me the reason.

I need to accomplish a task using the first way.

What could be the solution to the above ORA error?

Thank you
Column names cannot be used as a bind variable.
If you do not need to do this using method 1 as method 1 does not work by design.
On the other hand, you need replace the literal (7500,7900) with a variable binding.

--------
Sybrand Bakker
Senior Oracle DBA

Rendering of the elements in a JSP page only to users authenticated on adf-security
Greetings

This is a simple question?

I need to display a link only if I'm with a user authenticated on adf security. could someone provide me with the EL that I have to set the RENDER in my JSP

Thank you
Try something like:
ADFContext.getCurrent () .getSecurityContext () .isAuthenticated)

Therefore, EL must be:

adfContext.securityContext.authenticated

You should be able to use the EL generator.

Vincent

ORA-20001: INVALID USER: ACCESS DENIED! -TIVOLI
version 10.2.0.2

SQL > connect tivoli
Enter the password:
ERROR:
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-20001: INVALID USER: ACCESS DENIED! -TIVOLI
ORA-06512: at line 77 level

Published by: DBA2008 on February 12, 2010 11:59
Select the owner, trigger_name from dba_triggers where triggering_event = 'LOGIN ';

Unable to Sign In - error iTunes Connect user authentication (2006)

Hello guys, I am unable to connect to my iTunes Connect from my iPhone 6.

The error that says "Unable to Sign In French - error authenticating user iTunesConnect (2006).

Anyone faced similar questions before?

Check your USB connections

If you see the error 4005, 4013, 4014, learn what to door. If you see one of the errors below, you might have a USB connection problem:
- 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650
- 2000, 2001, 2002, 2005, 2006, 2009
- An error message that includes, "an invalid response.
Follow these steps to see if the problem is with your USB cable, a USB port or computer. Try again after each step:
1. Use the USB cable supplied with your device. If you do not, try a different cable USB Apple.
2. Switch to a different USB port on your computer. Do not connect on your keyboard.
3. Plug it into another computer.
4. If you still see the error, you can check for any other problem USB, with the third-party security softwareand the problems with hardware.
If the problem persists, contact The Apple support.

Get help with iOS update or restore errors - Apple Support

A user authenticated, what exactly?

I'M TRYING TO FIND WHAT AN AUTHENTICATED USER IS EXACTLY AND WHY IT WOULD BE ON MY COMPUTER.

An authenticated user is a user with a valid user on the computer or in Active Directory services account. The term is a name of group under current versions of Windows.

Invalid user authentication

Similar Questions

Check your USB connections

Maybe you are looking for