Xperia companion not to recognize the Z3
Hi all:
My Z3C is being repaired and I got a Z3 as a temporary phone. I can't get Xperia companion to recognize the Z3. My computer recognizes the device when I connect it, but Xperia Companion is dangerously silent... I rebooted the phone and the computer and changed USB cable... nada
The Z3 is Android 5.02 Build 23.1.C.0.39... it was originally T-Mobile brand.
Should I have the old PC Companion? An incantation by Warlocks? I just want a full repair/upgrade the device software up-to-date
Any help is appreciated more
I think I have sussed the issue. Found a PC that connects. Now I face the question that T-Mobile is not out of Marshmallow to the D6616. So far the carrier accuses Sony and the thread here points to T-mobile. Such is life. The Z3 is a backup for the Z3C I sent repair under warranty.
Tags: Sony Phones
Similar Questions
-
I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom
The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?
http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!
-
Tecra P4 not to recognize the new HARD drive
Hi all
I have a Tecra P4 - PTS40A-02100V, which does not recognize the new drive of 80 GB Hitachi (HTS541080G9SA00). The laptop is out of warranty and replacement drive was purchased. This is the second new floppy disk that the supplier sent me. The provider is an official supplier of Toshiba in Australia. Customer paid ~ $400AUD to the drive, if that could be a costly exercise.
I am able to get a vanilla Toshiba restore to work on the PC, but our organization uses WinPE based boot environment PXE for the kickoff of image and the version of Windows XP. It is not possible to use a generic Windows XP in our environment.
DiskPart in WinPE will not recognize the disc. Partition Magic and other popular applications will recognize the disc, others not. I can create an NTFS partition and format. Can create basic MBR and MFT, no chance to recognize. Also, I can use the drive in a caddy USB Windows XP on another end PC.
This new drive appear the same questions in a known working P4. I don't see any option in the BIOS to work around the problem. I updated the BIOS to v3.20, but the result is the same.
Clues?
Hey Buddy,
Just to test: is it possible to install Windows from the Toshiba Recovery disk? Have you tested this?
And interesting to know what the authorized service provider said of this behaviour. Did you already ask guys?
-
Application of Siri is not to recognize the word "Zigbee".
Hello
Siri application does not recognize the word "Zigbee".
NOTE:
Google properly recognize this word.
Thank you
Nagaraj M
That is regrettable.
-
How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you
Hello Ghostdogaln.
How do hang you the controller? You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.
If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
Portable xp Windows not to recognize the new iPad
Hi I have a laptop acer Ferrari 4000 running windows xp, so it is about 6 years old. I am trying to use my iPad as a hotspot, so my laptop can connect to the Internet. When I use the wifi to connect both the laptop does not recognize the iPad, but it does not have a password box to allow me to add the password given by the ipad to connect the two, just, he tries to connect the two then fails and he won, t recognize the ipad via bluetooth can you help please
Hello
It is not the problem with your computer because the laptop connects to find other networks. I suggest you to ask your question on the following Apple forums. -
DV9000 freezes - not to recognize the new second Drive
The laptop in question is a HP Pavilion DV9225us (DV9000) running Windows Vista Ultimate 64 bit (SP 2) with 2 GB of RAM and a chip from AMD Turion 64 x 2 TL-60 2.00 GHz.
I took the Samsung existing 120 GB drive in the second and replaced drive bay by a WD3200BEKT Scorpio 320 GB drive. After I put the new Scorpio drive with the correct HP caddy, the system would not start (for example, Windows Vista began to start, but hung on the screen empty which poster right before that with the Windows progress bar downstairs). I removed the Scorpio, and put it back in the original Samsung drive. Needed to run "Startup Repair" Windows several times during the sequence before priming it could start normally. (I guess he was trying to cancel the "fetid" caused by the player of Scorpion and trying to back up my original Samsung drive.) He finally managed (thank God).
I upgraded my BIOS on the DV9000, but that did not work. I tried also to access the disk in the BIOS during the boot. The BIOS as a secondary drive was there, but when I tried to do a BIOS diagnostic on it, he is hooked. In fact, he hung even when I tried to make a diagnosis of BIOS on the main drive as well.
After having contacted WD support, they suggested putting a jumper between pins 1 and 2 on the Scorpion to allow a PCN (reduced power setting) in the hope that it would recognize the HP. That no longer works.
I just have another HP Pavilion DV9620us (DV9500) laptop running Windows Vista Home Premium 32-bit (SP 2) with 2 GB of RAM and an AMD Turion 64 x 2 chip TL-58 1.90 GHz. It has also two drive bays. As an experiment, I installed the Scorpio 320 GB drive in
the second drive bay in this laptop. This laptop IS able to recognize (for example, mount) the reader, so for the heck of it, I formatted the disc while he was there. Then I took the drive formatted and installed on the second drive bay in my first laptop (DV9000). However, this did not help, because again once the system wouldn't start.
What is going on? Why my DV9500 laptop would be able to recognize and use the drive, but won't my DV9000? They do not use the same motherboard and BIOS?
I know that the Samsung 120 GB drive uses a connection SATA 1 (1.5 GB / s) and the Scorpio 320 GB SATA 3 (3 GB / s). The DV9000 does not support a SATA 3 drive? It's crazy to me, sounds, but I am so frustrated now, I think that anything...
Service and Maintenance Manual for this model: http://h10032.www1.hp.com/ctg/Manual/c01311536.pdf
indicate it is officially supported: 200, 160, 120, 100 - or hard disks of 80 GB.
Other size may work, but not in the official list of supported.
While some of the dv9500 models claims to "support all SATA drives.
-
WebWorks app not to recognize the plugin for Blackberry app
Hello! I'm portage a webapp Android to WebWorks. My Android application using Phonegap, so when I discovered the new WebWorks used to, it was a great relief. But the problem came when I tried to use the BlackBerry push service, because demand for some strange reason does not recognize the plugins I have installed through the console, just like the documentation says http://developer.blackberry.com/html5/apis/beta/blackberry.app.html.
Since then I have removed everything that belonged to the push service and I installed the com.blackberry.app plugin to test the ways that they are supposed to work. It debugged in the Web Inspector and I have this message.
ReferenceError: Can't find variable: blackberry
This error came from this line in my code:
Console.log ("the State of the screen is:" + blackberry.app.windowState);
In my config.xml file, I have the line:
I am new to this platform and I don't know if the plugins should be called somewhere in the html file or the js to make it work. Or is there something else wrong on how I use the plugins?
BTW: my application uses the last cordova because I developed since the SDK WebWorks 2.0.0.54, but my app Android used Cordova 2.0.0 and this library is called in the html code. So, when I tried to change the cordova for the last file, the application didn't work, so I left there where he was.
In the standard application of Cordova, the application calls app.initialize as follows (additional code left to show the implementation of the call and the scripts required):
...