User authentication with AD Director

Similar Questions

• VCS-E for VCS - C MOVI AUTHENTICATION WITH AD AUTHENTICATION

  Hello

  We have a VCS - C and VCS-E. We have movi users currently authenticated by the local Agent of MSDS database.

  We are now in the treatment of the migration to Active Directory authentication.

  We did it by selecting "Check for credentials" on VCS - C area (entry point for provisioned client) default and each user movi on internal network is getting authenticated with credentials of the AD. (User domain\username & domain password)

  However, if a user of VCS - E attempts to authenticate the credentials of the AD, the connection fails with an invalid username and password.

  If we try to use the username and password of MSDS agent, it works very well.

  Proceed to the next step, we have activated the "Check for authentication" then the VCS - C road customer area to the VCS-E. Then authentication is fine with the AD credentials for users outside movi.

  Now, I want to know, allowing the "Check for authentication" then the VCS - C course CLient area will affect the flow of calls between VCS - C and VCS-E or any service will be interrupted.

  Best regards / / Rio

  You have all the other things listed in the VCS-E? As endpoints, gateways? In brief

  anything with the same fields that are set up on the SCV - C as well?

  You register customers movi on the VCS-E or proxy list them on the VCS - C?

  Outside calls does not at all, as the auth hits the same domain only.

  What you might try is if your movi users can always successfully connect from the outside through the

  the VCS-E to the devices registered in the VCS - C and also presence and directories.

  These are the things that break likely tend to break, if there is something else wrong.

  Not to mention that if you have configured correctly it should work correctly

  Please take some time and go through this guide, they have fine examples in the annex,

  so you can double check your configuration:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-0.PDF

  Maybe, Andreas has something else to add.

  Please note the answers! (click on the stars below messages)

• 802. 1 x authentication with Radius and win7 Mab

  Good afternoon!

  I have a question about 802.1 x I've set up a laboratory in which I have configured authentication mab with 802. 1 x, but I have a weird behavior of my network controller. On the switch (4948e), I see that the user is authenticated and authorized, and I can see my switch these outputs:

  21 April 15:13:30.263: % AUTHMGR-5-START: start "mab" for the customer (a01d.48ac.b7f
  (5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C0000002E002F3DAC
  * Apr 21 15:13:30.267: % MAB-5-SUCCESS: authentication successful for the client (a01d
  . 48AC.B7F5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C0000002E002F3DAC
  * April 21 15:13:30.267: % AUTHMGR-7-RESULT: authentication result 'success' of me
  ab' for the client (a01d.48ac.b7f5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C00000
  02E002F3DAC
  * Apr 21 15:13:31.299: % AUTHMGR-5-SUCCESS: authorization succeeds in for the customer (a0
  1d.48AC.B7F5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C0000002E002F3DAC

  If I type "see the authentication session", the corresponding output.

  Switch #show authentication sessions

  Interface MAC address method ID of Session of field status
  Item in gi1/11 a01d.48ac.b7f5 mab DATA Authz success C0A8DF9C0000002E002F3DAC

  The thing is that when I check my network controller, it said "authentication failure". That's what I've done so far:

  1. I restarted my pc, the same behavior.

  2. I disabled and enabled my network controller, the same behavior.

  3. I rebooted the switch and re-configured. Same behavior.

  4. I tried with another PC configuration. Same behavior.

  5. I changed the configuration of "user authentication" using dot1x EAP authenticator and it worked.

  This is the configuration I have on my switch:

  AAA new-model
  Group AAA dot1x default authentication RADIUS
  Group AAA authorization network default RADIUS
  start-stop radius group AAA accounting dot1x default
  AAA - the id of the joint session

  !

  control-dot1x system-auth

  !

  Switch #show run gigabitEthernet int 1/11
  Building configuration...

  Current configuration: 128 bytes
  !
  interface GigabitEthernet1/11

  Cx-to-Host description
  switchport access vlan 223
  switchport mode access
  Auto control of the port of authentication
  MAB
  end

  This is the first time I'll put up a configuration 802. 1 x. I'm doing something wrong?

  I really hope that I am not the only one with this kind of behavior!

  Thank you for any assistance you can give me!

  Status: Authz success

  This means that the port is open. Is this permanent? Keep looking at the output of the show a few minutes see if it tries to dot1x too. Can you ping from the PC?

  As authentication of 802. 1 X is enabled in the properties of the map NETWORK PC that you can expect dot1x method runs on the switch and eventually respond to the computer with auth fail. Authentication in the PC box is not necessary for MAB.

  What type of RADIUS server you use and there 802.1 policy X in addition to MAB policy?

  IP address: unknown

  This means that the switch did not recognize the IP address of the host, probably due to the lack of

  analysis of IP device

  command. But it is not necessary for the plain MAB or dot1x.

• VPN3002 PAT-Mode and individual user authentication

  Hi all

  I have three questions about the VPN3002 connected to a VPN3005 in the PAT mode

  and with authentication of the individual user.

  First of all:

  Is it possible to use this function for several users to the

  private LAN.

  Because I tried this, but when we the second user has been authenticated one could not work more.

  Second:

  When we first meet is YES, can be the users in a group of dispute as the

  VPN3002 Client it self?

  Third:

  That is, when there is a router between the local private network and users?

  Because the field of authentication of user appears only when users

  are directly connected to the private lan.

  I tried with PAT, but this was not possible because the VPN3002 can

  different users.

  I think that it will be possible with NAT, but then I ran to my first question.

  concerning

  Karlheinz

  1 > it is the main function of the user authentication feature see here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3002/3_5/get_star/gs1under.htm#xtocid13

  2 > users cannot be in the other group. Group is dependent of the what the 3002 cumulates in.

  3 > it wouldn't send other subnets connected to the private sector. The design of the 3002 is such that only the subnet behind it, is what it can do vpn for.

  Kind regards

• TimesTen - 7001: user authentication failed when using XLA

  I installed TimesTen 11.2.1.8.0 on AIX 5.3 System.* user 'oracle '. I created another user of the application 'risk' to use in my application with TimesTen.

  When running my application with the user 'risk' to connect with TimesTen it is OK. But when I want to use the XLA feature, when I call the createDurableSubscriber function, it returns the error

  javax.jms.JMSException: failure of SQLDriverConnect (XlaCommon.c, line 48): S1000 7001 [TimesTen] [driver ODBC of TimesTen 11.2.1.8.0] TT7001 [TimesTen]: user authentication failed - file "db.c", lineno 9722, procedure 'sbDbConnect '.

  It is strange that if I switch to user 'oracle', it works fine.

  Can someone please help understand the reason why.

  Thank you

  You created the user 'at risk' within your TimesTen database?

  CREATE a USER risk IDENTIFIED BY 'some password'?

  You granted the privilege of the user risk to use XLA?

  XLA GRANT at risk;

  Have you used this user name and password in the JDBC URL when connecting to the database application JMS/XLA?

  The 'oracle' user is probably your admin user of the instance (which is the database root) and therefore can use all the features without special action (but of course you never run application as that user).

  Chris

• Basic authentication with the RESTful WEb service and a Web Service reference

  Hi all
  
  We have made significant progress on getting an application to work with RESTful web services, but are now trying to understand how to lock a RESTful Web service while making it available for a particular application.
  
  We use one of the 'emp' table sample web services come with Apex 4.2 and are trying to apply the Basic Auth to the WEb Service using Weblogic filter defined in the web.xml file. Which works very well. I now get challenged when I try to go to:
  
  https://wlogic.edu/Apex/BNR/ACE/HR/empinfo/
  
  And when I authenticate this challenge, I am able to get the data. (we are usiing the Weblogic-level LDAP authentication)
  
  However, I'm not sure how to get even basic authentication to work with Web Service reference in my application. I see the error message in the application when I try to call this Web Service:
  
  401 Unauthorized <
  
  And I see:
  "The request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the request already includes identification of the authorization information»
  
  How can I provide the credentials in the Web reference or provide credentials in the Application?
  Web service works fine if I remove the auth basic RESTful web service in the Web.xml file.
  
  We should NOT use basic auth and auth Weblogic web service definition basic RESTful Workspace use instead. If so, how would we implement THIS basic authentication in the definition of Web Service and the Web SErvice reference on the application?
  
  Thank you
  Pat

  Hello Scott,

  Thank you. There is a function for rest in the package:

  function make_rest_request(
  --
  -- This function invokes a RESTful Web service with the supplied name value pairs, body clob, or body blob
  -- the response as an clob.
  --
  -- Arguments:
  --   p_url                  The url endpoint of the Web service
  --   p_http_method          The HTTP Method to use, PUT, POST, GET, HEAD or DELETE
  --   p_username             The username if basic authentication is required for this service
  --   p_password             The password if basic authentication is required for this service
  --   p_proxy_override       The proxy to use for the request
  --   p_body                 The HTTP payload to be sent as clob
  --   p_body_blob            The HTTP payload to be sent as binary blob (ex., posting a file)
  --   p_parm_name            The name of the parameters to be used in name/value pairs
  --   p_parm_value           The value of the paramters to be used in name/value pairs
  --   p_wallet_path          The filesystem path to a wallet if request is https
  --                          ex., file:/usr/home/oracle/WALLETS
  --   p_wallet_pwd           The password to access the wallet
  --
      p_url               in varchar2,
      p_http_method       in varchar2,
      p_username          in varchar2 default null,
      p_password          in varchar2 default null,
      p_proxy_override    in varchar2 default null,
      p_transfer_timeout  in number default 180,
      p_body              in clob default empty_clob(),
      p_body_blob         in blob default empty_blob(),
      p_parm_name         in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_parm_value        in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_wallet_path       in varchar2 default null,
      p_wallet_pwd        in varchar2 default null ) return clob;
  

  My point was that using the API makes things easier if you have to look for a solution.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Connection of the user authenticated to the external proxy

  Hi Experts,
  
  I created an externally authenticated user in the database. And can connect without a password with the syntax below.
  
  SQL > connect / @TESTDB
  Connected.
  SQL > show user;
  The USER is 'SCOTT '.
  
  That user scott has a power of attorney to an another DBuser PROXY_USER authorization.
  I got the syntax but that works only from BONES of the database.
  
  sqlplus [proxy_user].
  SQL * more: Production version 11.1.0.6.0 on Mon 15 Nov 16:28:47 2010
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  Connected to:
  Oracle Database 11 g Release 11.1.0.6.0 - 64 bit Production
  
  I can log in as a user authenticated outside windows CLIENT running on Release 10.2.0.1.0
  
  SQL > connect / @TESTDB
  Connected.
  
  But the syntax of connectivity above Proxy fails with below the CUSTOMER
  
  SQL > connect [proxy_user] / @TESTDB
  SP2-0306: invalid Option.
  Usage: CONN [ECT] [connection] [AS {SYSDBA |}] SYSOPER}]
  where < logon >: = < user > [< password >] [@ < connect_identifier >] | /
  
  But works the same syntax of database OS!
  
  I can connect to TOAD, but can not connect from SQLDEVELOPER or SQLPLUS
  
  My sqldeveloper version is:
  
  Version 2.1.1.64
  Build a HAND - 64.45
  
  and sqlplus:
  SQL * more: Release 10.2.0.1.0
  
  Any idea?
  
  
  Thank you.
  
  Published by: najet November 18, 2010 15:09

  Hi najet

  If you get SQLPLUS work SQLDeveloper (thickness jdbc/oci/instant customer) is definitely worth a try.

  I don't know what the problem with your configuration of the proxy usecases that I am familiar are:
  Through the UI SQLDeveloper

  There are two ways to make proxy connections:
  where p1 is user proxy and c1 is a client of the proxy:

  method 1/single session (if no 2nd password or unique name required)
  Main connection popup
  user: p1 [c1]
  password: p1

  2/two method session
  Main connection popup
  user: p1
  password p1

  context connection authentication

  client proxy: c1
  no password or unique name

  -Turloch
  Team SQLDeveloper

• Rendering of the elements in a JSP page only to users authenticated on adf-security

  Greetings
  
  This is a simple question?
  
  I need to display a link only if I'm with a user authenticated on adf security. could someone provide me with the EL that I have to set the RENDER in my JSP
  
  Thank you

  Try something like:
  ADFContext.getCurrent () .getSecurityContext () .isAuthenticated)

  Therefore, EL must be:

  adfContext.securityContext.authenticated

  You should be able to use the EL generator.

  Vincent

• Invalid user authentication

  Hello
  
  I'm on IOM 9102 + Websphere, I ran the patch_websphere and redeploy the .ear file. But now when I try to connect to the IOM, his throw invalid user authentication and I am not able to connect to the IOM. When I enter the password, its not taking the password and the cursor goes back to the user name text box.
  
  Thank you
  Suren

  This means that it is already disabled. To check, from the command line, run the following:
  wsadmin - port NONE

  This will connect you to the websphere administration tool. Next type:
  securityoff

  This will stop the security that allows you to connect with any username and password. Restart WebSphere.

  From this point you must enable security. Follow these steps:
  -Once WebSphere returns upwards, connect with any what user name and password in the console of websphere.
  -Access security--> user records--> custom
  -Enter the user name "XELSYSADM" and then make sure to ignore case is marked
  -Enter the password xelsysadm for "Server User Password"
  -Click 'OK' and 'Save' in the master configuration.

  I don't have a console of websphere that I have, but this will allow security for the application again. Restart and see what happens.

  -Kevin

• How do I create a new user account with windows XP Home Edition after operational failure

  How do I create a new user account with windows XP Home Edition after operational failure

  Hi andyprice,
   
  -What is the operational flaw that you speak?
  -You receive an error message when trying to create a new user account?
   
  Write us with more information pertaining to the matter to help us help you better.
   
  In the meantime, you can refer to this article:
  How to create and configure user accounts in Windows XP

• Cannot reset the user vmail with Cisco Unified CM Administration password

  We use Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to tell me that they could access is no longer the voicemail, getting PIN disabled. Ichanged the PIN with the Cisco Unified CM Administration that accepts the new pin without problem, but when we try from the phone, it does not work. Any ideas... Thank you Don

  Hi Don,

  For voicemail partners changes/updates, you should choose

  2 cisco Unity Connection Administration.

  Then; Users > Find/list > user associated with selectect > drop-down Edit > change passwords >

  Change voicemail password

  See you soon!

  SoC

  "Spend your life waiting,
  a moment that all do not come.
  Well, don't waste your time waiting.

  -Springsteen

• Cisco ISE 1.3 - Mab authentication with a vlan for each foor

  Hello

  A client wants to implement authentication MAB with a vlan for each floor. I found a solution of Loïc

  I have set up the following:

  -the profile of different authentication with a vlan different.

  -Add the endpoint (printer etc) endpoint identity.

  -create endpoint group identity that end point of recall.

  -create a rule to authorizzation reminding all work and element... in the end.

  Do you know if there is a faster way where another way to solve the problem?

  Thank you all

  Well, mab in some environments, could be replaced by profiling and for rules, rather af with a rule authz for each floor, you can name your VLAN in your eponymous switches to "Printers", in the world, then you would only need an authz rule, where you use the name of the vlan instead of identification number, so no matter where this printer , it will end in the vlan 'Printer', whatever it is in this specific switch.

• BlackBerry smartphones "the application cannot be processed until multiple pending user authentications are resolved (error Id: 40831).

  I tried to login to my account to update to Windows Live Messenger and got this error message. What should I do to correct this? I have not attempted to identify some time, so I'm afraid it says "multiple pending user authentications.

  According to me, whereas it has proved to be a problem of Blackberry App World (or BB in general). A battery lawn mower folding to solve the problem... Thanks for your suggestion though

• double authentication with Cisco's VPN IPSEC client

  Cisco VPN client (the legacy IPSEC client) does support dual authentication with RSA token AND ActiveDirectory credentials?

  I know that AnyConnect supports it and the commandsecondary- authentication -Server- group' is only for ssl connections, but must be confirmed.

  Kind regards

  Mohammad

  Hi Mohammad,.

  What is double authentication support for Cisco VPN Client?

  A. No. Double authentication only is not supported on the Cisco VPN Client.

  You can find more information on the customer Cisco VPN here.

  As you said the only client that supports dual authentication is the Cisco AnyConnect secure mobility Client.

  Please note and mark it as correct this Post!

  Let me know if there are still questions about it!

  David Castro,

• user account with windows media player

  What are the disadvantages of having a user account with windows media player and be able to access all of your files on any computer? No USB, no connection have to do your computer at home... just a design simple and straightforward to connect and disconnect and be able to access everything on your wmp?

  Hello

  Please see the link and send your comments.

  http://support.Microsoft.com/common/survey.aspx?scid=sw%3ben-us%3b2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1