Inverted inline text within the text block bar

Similar Questions

• Can't manually type us the commands within the execution block?

  11.2.0.3/Linux
  
  I was doing a RMAN restore to a new server.
  
  Here's the code I wanted to run to restore

  run
   {
   SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
   restore database  ;
   }

  Because it's just 2 lines in an execution block, so I thought to type manually. After typing the first line (SET NEW NAME..) that ends with a semi colon, I pressed the ENTER key so that the following line, and then type the RESTORE command. But I got the following error message.
  

  RMAN> run
  2> {
  3> set new name for database to '/fnup/hwrc/oradata/spikey';   ###### After typing the semicolon I pressed ENTER here
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-00558: error encountered while parsing input commands
  RMAN-01009: syntax error: found "new": expecting one of: "archivelog, autobackup, auxiliary, auxname, backup, command, compression, controlfile, database, dbid, decryption, echo, encryption, high, incarnation, maxcorrupt, maxseq, newname, nocfau, restore, snapshot, to restore point, until restore point, until"
  RMAN-01007: at line 3 column 5 file: standard input
  
  
  ------| Second Attempt |----------------------------------------------
  
  RMAN> run
  2> {
  3> set new name for database to '/fnup/hwrc/oradata/spikey'; ###### After typing the semicolon I pressed ENTER here
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-00558: error encountered while parsing input commands
  RMAN-01009: syntax error: found "new": expecting one of: "archivelog, autobackup, auxiliary, auxname, backup, command, compression, controlfile, database, dbid, decryption, echo, encryption, high, incarnation, maxcorrupt, maxseq, newname, nocfau, restore, snapshot, to restore point, until restore point, until"
  RMAN-01007: at line 3 column 5 file: standard input

  Finally, I had to put the 2 lines above into a script and run using the cmdfile parameter. Can we execute RMAN commands in an execution only block via a script?

  The VALUE of NEWNAME should be included in the execution block. In your case, you must divide the NEWNAME the NEW NAMEkeyword.

  new name for the database to ' / UNPF/Edda/oradata/spikey. "

  You must use the command in the execution below block

  the value of newname for database to "/ UNPF/Edda/oradata/spikey."

• Blocks of text within the illustration/container management

  Hello

  One of the things I do most often, as a technical writer, creates frameworks anchored including an illustration, some blocks of text and a few lines that connect them. Import into FrameMaker, a related illustration (or create a frame and import is the illustration), resize the frame surrounding the illustration, and then create blocks of text inside frame illustraton to include captions.

  I would reach the same goal in InDesign CS5, but have yet to understand what is the right way.

  First of all, I assume that the equivalent of "Below the current line" anchored frames, ID, is a framework inserted, that must be repositioned vertically.

  But then, after that I placed a picture in there, I don't know how to add text blocks that remain fixed within the frame of the illustration (the framework 'container', I would call it). It seems to me that any item, other than the illustration cannot be included within this framework 'container '.

  Any suggestion on the other how it would be welcome.

  Best regards

  Paolo

  You'll want to make your artwork and blocks of text as separate objects, and then group them before pasting in the text stream to anchor the group.

• Rotate the text with the character within the text block style

  I would like to apply a paragraph or character style to a certain character in a text frame. I would need to rotate 90 degrees in the framework, separate from the other text. Is this possible?

  Insert the text block in the block of text as an anchor and rotation you need.

• Create the text block and flow of

  Dear friends,

  I need your help "very urgent."

  How excess content stream of framework (table) text for the next block of text? The following image must be created.

  Front

  

  I need after-

  

  Please suggest friends

  Thanks in advance

  KS

  If you select a textframe, you already have a textframe. So, if you choose app.selection [0] .textFrames [0], this means an anchored within a textframe textframe.

  And: You try to create your textframe on page 1. But you must add the new textframe on the page following the page of your choice.

  So, try this one:

  var curDoc = app.activeDocument;
  var frame1 = app.selection[0];
  var parPage = frame1.parentPage.documentOffset;
  var frame2 = curDoc.pages[parPage+1].textFrames.add({geometricBounds: [50, 50, 100,100]});
  frame2.previousTextFrame = frame1;
  

• Eratic behavior: book, the main text blocks and Cross References

  I'm on InDesign 2014.2. Mac.

  I'm working on a fairly large book. About 14 chapters / sections, about 400 total pages. There are also hundreds of cross references, almost all of them to anchor references.

  The design of the book is as simple as possible. There is no graphics, text blocks only.

  I use a single master page, with facing pages, and a block of text type. I used it throughout the production of the book, and the primary text flow worked well, chapter after chapter. Pages have been created automatically, and automatically flowed text.

  Maybe I need to change the page size of the book, and I also have a lot of editing to do which will reduce a lot of the chapters. I wanted to make sure all pages use the main text flow to do that, go as gently as possible.

  To my dismay, I discovered that although I used systematically throughout the book master text streams, all but three of my chapters have inexplicably lost their text stream. All images in these chapters have converted into ordinary images. That I edit the book, it's playing havoc with paging and referrals.

  I tried to restore the flow of text in one of the first chapters. It's easy to do, in theory.

  • Move the first page off to the side frame
  • Delete all pages except the first page
  • Command-shift-click on the first page to restore the flow of the main text
  • Copy and paste the contents of the old frame into the primary stream restored.

  
  

  When I do, the pages to move properly, and I'm back to having a chapter with a block of primary text on each page. Unfortunately, this breaks all cross-references that refer to this newly reorganized chapter and all references to the front in this chapter.

  
  

  I tried to do all that I could imagine. Only remove the frames and not pages. Try without the busy book. Nothing works. I tried the command update cross-references in the book menu. Has nothing.

  
  

  It seems impossible to redistribute the text in a new primary master framework, without completely breaking the cross references.

  I finally found something that seems to work:

  • Create a new master page at the end of the document.
  • Go to the last page of the history of the chapter and the last history image a link to the text block type on the page that you just created.
  • In the pages palette, delete all pages in the document, with the exception of the master page that you created.

  All text will be redistributed within the frameworks of masters, and cross-references (to and from the frame) seem to be intact.

• Placement of inline text... remember to come out of the text box

  I have a chart of the family tree I made in InDesign, which is saved to a file group .indd. I initially placed this family tree in an InDesign extension document which is full of text and placed it right on top of the text and did a text wrap so that the text would be no obscure the graph.

  Now I would like to pass a separate chart placed at a fixed text graphics, so that the chart to go with the text.

  When I try either of the following workflow:

  -cut graphic, place the cursor in the text, and then paste

  or

  -remove the graphic, choose file > place, select the graphic.indd file, click the cursor in the text.

  the chart just above the slider in the form of a separate chart seems... not inline.

  No idea what could happen here?

  InDesign CS5 on Mac by the way.

  Click in the text block that contains your text then go to the history editor (file > edit in story editor or are command for the shortcut). You can see the anchor icons that indicate an anchored object? Here is a screenshot with the anchors, circled in red.

  

  The first is in the middle of a paragraph, and the second is in its own paragraph.

  If the object is online, it will have an icon of the anchor. If that's what you have, but you don't like the establishment, you can exit the editor and click the object on the page with the Selection tool and go to object > anchored object > Options. Here you can choose between Inline (with the possibility to change the positioning of Y if Inline), or above the line (with the possibility to change the alignment and spacing before and after space). Your other choice is personal, where you have many options. Either way, you can prevent manual positioning with a checkbox.

• Text block blocking the relaxation area

  Hello.

  I have a problem with blocks of text within a trigger (eg. widget ToolTip).

  What I've done so far:

  1. Insert the ToolTip widget.

  2 customize the trigger:

  2A. create a background (race up and down and a small point like a fill on the right side)

  2B. set a text block (smaller than the container of the trigger) inside the area of relaxation with text (placed in the middle of relaxation)

  2 c. oblige States to turnover etc for the textframe.

  3. overview in Muse and preview in the browser (Safari). same problem

  The clickable area / rolling worked only where there is no text. Means outside the textframe (but inside the trigger area stille), everything works fine (reversal / clickable).

  But as soon as the cursor of the hit of the text (even between the letters), mousepointer swaps to normal and you are anable to click more.

  4. has tried to organize the relaxation for the back (you can only organize the whole Tigger, not only the text inside block). Not working, it cause displacement the target order.

  What can I do? Is there one solution other than the use of a button in Photoshop?

  Any help is appreciated more than.

  Best

  Hoschi

  Hi Aish,

  I thought about it. The block of text was in the correct position inside the trigger. There was a group has above triggers, so it has blackened.

  Problem solved...

  Thx for your help and your patience.

  Hoschi

• change the color of text blocks only the active layer

  Well my script to change the color of the text frame changes the color of all the blocks of text hidden or not.

  I need to change only the visible text blocks.

  If (app.documents.length > 0) {}

  newCMYKColor = new CMYKColor();

  newCMYKColor.black = 0;

  newCMYKColor.cyan = 0;

  newCMYKColor.magenta = 0;

  newCMYKColor.yellow = 0;

  for (i = 0; i < app.activeDocument.textFrames.length; i ++) {}

  textArtRange = app.activeDocument.textFrames [i] .textRange;

  textArtRange.characterAttributes.fillColor = newCMYKColor;

  }

  }

  Any ideas on how the way only change the color of the text on the active layer blocks? In the final script I want to hide all other layers so if it could be done by a visible attribute more easily that would work just as well.

  Thank you

  Duane Leach

  Hello

  It will work for you?  Have not tested much beyond text blocks in groups and those who are just stand-alone on the layer.

  If (app.documents.length > 0) {}

  var thisDoc = app.activeDocument;

  newCMYKColor = new CMYKColor();

  newCMYKColor.black = 00;

  newCMYKColor.cyan = 40;

  newCMYKColor.magenta = 50;

  newCMYKColor.yellow = 50;

  Need to retrieve blocks of text within the groups on the layer.

  var artSel = thisDoc.activeLayer.groupItems;

  for (i = 0; i<>

  If (artSel [i] .hidden == false) {}

  var text = .textFrames artSel [i];

  for (j = 0; j<>

  text [j].textRange.characterAttributes.fillColor = newCMYKColor;

  }

  }

  End to change the rest of the outside groups text boxes.

  var textArtRange = app.activeDocument.activeLayer.textFrames;

  for (k = 0; k<>

  If (textArtRange [k] .hidden is false)

  textArtRange [k].textRange.characterAttributes.fillColor = newCMYKColor

  }

  on the other

  Alert ("it is not any open documents to change...");

• Framework in the context of text block text block

  Hi, I feel I ask a stupid question but I am about to throw my computer out the window, so I have about him asking anyway.

  I have a layout of book with a stream of regular text in any of the pages (my body text), but I created a line object with a text block I want to screw together in case goes on 2 pages, when I try to click on the Red [+] to connect the 2 text block, I can't. It wont let me click on it, I tried command - click as when you want to select an object in another, but it does not work.

  Is it possible to have a block of text within another framework? Maybe I did it the right way. Can someone help me with this please?

  Thanks in advance

  On the photo I cercled in red that I would like to be linked together (2 bluish objects), the thread of text that is already there is my block of text type where is my body text.

  

  You cannot screw anchored text frames.

  Bob

• I have stored more than 120 bookmarks and deleted the names to save space in the quick bookmark bar. Therefore, since the Bard got full, if a bookmark or folder had desciptive text next to it, the text would collapse until just the icon shows. I have

  I have stored more than 120 bookmarks and deleted the names to save space in the quick bookmark bar. Therefore, since the Bard got full, if a bookmark or folder had desciptive text next to it, the text would collapse until just the icon shows. If I hover over the icon, the test appears again. These days, I found easier to rank my favorites in folders, HOWEVER, I do not know which folder is because the text next to the icons folder remains reduced until I have pass the mouse on them. I want to customize it so that the text is fixed next to the icon or folder. How can I do this? Please help and thank you!

  Incredible bookmarks try: https://addons.mozilla.org/firefox/addon/50722

• definition of text within the specific Web div object

  Hello!  I am trying to find a way to take the text of a text caption and assign it to a specific div inside a Web object.

  I tested it with a site regular html with embedded iframe and it works fine, but with Captivate, I can't get the text to a web object.

  The WebObject is named CC_box and inside, there is a div tag with an id of 'text' - this is where the text should go.  The text caption containing the text is named CC_source_1 for the first slide, then CC_source_2 for the next, etc.

  Here is my code:

  var slideNumber = window.cpAPIInterface.getCurrentSlideIndex ();                                Gets the number of the current slide

  var ccText = document.getElementById("CC_source_"_+_slideNumber).textContent;     Retrieves the text of a legend of text on a page in progress - works fine

  $("#CC_box).contents ().find("#text").html (ccText);                                                          This line of code works perfectly in HTML, but not in Captivate

  What is a good way to access this div within the web object of Captivate?

  Thank you!

  Thank you, I'll try that!

  in the meantime I kept trying different things here and found that if I go 'deeper' and call iframe directly as opposed to a container div, everything works, so in this case the following worked:

  $("#myFrame_CC_boxc").contents ().find("#text").html (ccText);

  Interestingly, Captivate attached a 'c' at the end of the name of the div, so even if I named the CC_box of Web object, we call it actually CC_boxc if you look in the DOM Explorer

• How to put a new line in the text block using jsx?

  Hello guys,.

  I am concatenating the content of the text block using two JSX, but I want separator as a new line. I have tried \n but does not work please help how to do that.

  var  seperator = "\n" 
  frame1.textItem.contents + seperator + text;
  

  Hi UpendraSengarr,

  Try this:

  var frame1 = app.activeDocument.activeLayer;
  var  seperator = "\r";
  frame1.textItem.contents = frame1.textItem.contents + seperator + "text";
  

  Have fun

• Tutorial of the postcard - can't get the new text block started

  It is a very basic question. I do the tutorial of postcard. I'm unable to get a second text block began on the front of the postcard to the time of the event. I take the text tool and drag it, but it does not create a new text frame. He thinks I want to type the information in the context of existing text.

  I hit escape repeatedly to try and out the first block of text, clicking on the tool text several times, tried shift and click, put the date in a Microsoft Word's doc information and then tried to 'Place' - all to nothing done. How can I get the file to understand that I am creating a second block of text?  How to get out the original text block?

  This seems to be a problem for me, I can't "uncheck" any tool path - by clicking on another tool or hit escape. It does not work. I close the file, then open it new in order to use a new tool. Very frustrating and time-consuming. I work under Windows, if that helps.

  Thank you.

  Try to zoom a little and start your slide text tool starting off the page on the region of cardboard. Using the black selection tool, you can drag to the page and resize it using the bounding box handles.

• How to bind the text blocks between pages?

  Hello

  I searched all autour for this, and I'm guessing that the answer could be so simple that no tutorial it doesn't even mention:

  How can I link the blocks of text between pages? I made a block of text in each master page and then connected one left with the one on the right. Indeed, all of the text in the document is linked from the page on the left of the right-hand page. But how do I link the page on the right with the following two pages 'below' in the document?

  If I'm not clear, here is another attempt to explain: I'm going to insert a lot of text in a document, and I already know the size and the type of text block, I want the text inserted. When I put the text in the left side, it connects (goes on) the block of text on the right side. But it stops there. So I have to manaully through both pages, which connects the right page "at the top" with the left 'below', page by clicking on the image by clicking on the small arrow in the lower right corner, and clicking on the next page below. There must be a way to organize it in master pages or in some other way?

  Thanks in advance for helping me with this problem of small size, but huge!

  Best

  Kim

  Two things...

  For "automatic formatting" to work with Captain linked frames page, you must NOT release the Master frame before placing the text, and you must click inside the image area, not any sort of guide.