Invoking applications using active text - how to configure?

Similar Questions

• Images of the application under Oracle XE - how to configure a path alias?

  Hello
  
  I installed an APEX on XE application that has been developed under Oracle10g and Apache (mainly so I can get a portable demo system).
  
  There are two application images that display the logo. Under Apache, they were put in a directory and an alias in the httpd.conf file - as described on ProApEx p419.
  
  My question is: how will I achieve under XE?
  
  Ideally, I would like my request to the XE and so wanted to create the same alias - but, XE uses Apache and I can't find how to get my recognized images. All images of the Apex are the loading apxldimg script to takes care of that. I have to create a script to load custom for my images so that they come from the database under XE?
  
  Thanks for your suggestions,
  Steve

  Hello
  You must configure access to the XDB repository via a Protocol (WebDav or FTP), thereafter, you will be able to put the files in a special issue "file system" from the XE.

  You can find some information about it in a post I wrote some time ago, where there are also links to the documentation:

  http://oraclequirks.blogspot.com/2007/12/on-Oracle-XDB-repository-FTP-WebDAV-and.html

  I normally develop on virtual machines XE (running on a Mac), and then deploy a standard 10 G database running on Solaris without problem, it's just a matter to set up the right protocols and keep synchronized directories.

  Bye,.
  Flavio

  ----------------------------------------
  http://www.oraclequirks.com

• [ADF, JDev12.1.3] How to configure GlassFish to run my application ADF using HTTPS/SSL?

  Hallo,

  on GlassFish 3.1.2 I have deployed my ADF Essentials application.

  Now I configure GlassFish server to run my application using HTTPS/SSL.

  I would like to install the certificate MyDomainCert.crt, Intermediate.cert and MyDomainPrivateKey.crt files and configure GlassFish.

  Could you kindly advice me a clear and not to hard document that describes how to configure the application server?

  Thank you very much

  Federico

  Finally, I reached the goal

  These links also helped me:

  Installation certificate Thawte on 3.11 Glassfish server for https traffic. Art of Software Engineering

  https://javadude.WordPress.com/2013/03/22/GlassFish-v3-1-2-and-SSL/

  Programming the Mr.J4mes Wonderland: [How To] - implement the SSL certificate on the GlassFish application server

  In addition, I would say to use the free program "KeyStore Explorer" (key - homepage file Explorer) to easily import the certificates and private key in the keystore of Java.

  Ciao,.

  Federico

• Whenever I want to use Camera Raw preferences, I get the message "the original application of the bridge is not active. How can I fix?

  Whenever I want to use Camera Raw preferences, I get the message "the original application of the bridge is not active. How can I fix?

  Hi yvesd,

  What version of the bridge are you using?

  • Please close bridge
  • Open Photoshop
  • Open a picture
  • Select the file > Browse in Bridge

  Also, make sure that you have compatible versions of Bridge and Photoshop, as if you use Bridge CC, make sure that Photoshop CC (latest) is installed.

  Kind regards

  Assani

• Re: How to configure Ant in adf application using Jdeveloper 11.1.2.3.0?

  Hi all

  I use jdev 11.1.2.3.0.

  Any can help me how to configure Ant in adf application using Jdeveloper 11.1.2.3.0?

  With respect,

  satishkumarN

  HI Sissi,

  Your question is not able to understand. I guess you are looking for building project using ant for deployment.

  Please find the links below

  Construction projects with Ant

  Use of Maven in JDeveloper 11.1.2: asked to build ADF with Maven using Ant ojdeploy

  One size does not fit all: using ojdeploy and Ant to create pots of ADF library

  Thank you

  Nitesh

• How to configure CPU Meter so that it displays the image instead of the text version.

  How to configure CPU Meter so that it displays the image instead of the text version.

  Hi John,.

  Welcome to the Microsoft community.

  The CPU Meter gadget shows the status of the two main resources, you can follow on your computer - the use of your CPU and memory.

  To install the CPU Meter gadget in Windows 7, just right click anywhere on your desktop and click on Gadgets. Search the CPU Meter gadget and drag it to your desktop.

  See the Microsoft Article below and check if this is useful:

  http://Windows.Microsoft.com/en-us/Windows7/customize-desktop-gadgets

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• How do I debug my application using BlackBerry device instead of Simulator

  Hi all

  Currently, developing an application and tests normally this application using Simulator by right-clicking the application and select Debug as blackberry Simulator, now I want to test the app using device, I plugged the unit using the USB port to my windows pc and when I click with the right button on the application and select Debug as blackberry device it does not work? How can I test my application using device someone give me idea

  1. Connect the BlackBerry device to your computer via a USB cable.
  2. Open the BlackBerry Device Manager.
  3. Install the application on the BlackBerry smartphone.
  4. In Eclipse, the menu run, click Debug Configurations.
  5. Right click on the BlackBerry smartphone, and then click New.
  6. In the name field, type a name.
  7. Click the BlackBerry device.
  8. In the BlackBerry device configuration section, do one of the following actions:
     • Select attach to everything connected to any device BlackBerry is connected.
     • Select attach to the specific device. Select a device of BlackBerry to attach it to the BlackBerry device drop-down list.
  9. Click on debug.

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• BlackBerry smartphone how to configure and use e-mail without BES

  Hello

  I'm trying to figure How to configure and use e-mail without using a BES.

  I checked with the local telephone company. And the number is not ascociated with any service of BES.

  The entry of services show no indication in this sense.

  In addition, the configuration of SIM card show that everything is disabled. This means that the phone is unlocked. At least that is my understanding.

  However, even after a wipe, the BB device does not set up an e-mail account, as described in the manual. He keeps asking for a BES activation first.

  What will do that disappears?

  And to allow the configuration of the "spam"?

  Just develop the right answer given by JSanders, you can always access your email accounts and social networks (facebook, twitter, google +, etc) on your phone, you will just have no notifications PUSHED to your phone.  You can access the internet on your phone in order to access these accounts, but it should go to them.  With BlackBerry Internet Service activated on your phone account, RIM will push these notifications of new emails, facebook messages, new tweets etc. for your phone.  That's what you'll be missing out on without active BIS.

  I wanted to just make sure that there is no likelihood of confusion.

• How to configure in the apex using other engine of transformation XSL - FO instead of Bi publisher

  can someone give me a quite complete example for me on the engine configuration of processing XSL - FO in the Apex.

  I'm feeling rather puzzled about the example set by the introduction of the link:http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html#06

  in the apex_fop_render.jsp file.

  Hi 2952702,

  2952702 wrote:

  Please change your login username of "2952702" to something meaningful. Reference: Video tutorial how to change username available

  When I install the apex5 rest data service, the installation guide tell me pdf printing is supported by the rest data service

  but after the installation of ADR, I don't have the result I want.

  

  Yes, as you directed in the code snippet included listener Web Oracle APEX Documentation Options, Services (ORDS) data Oracle REMAINS usable as a PDF as FOP support print server is included in the ADR 2.0 and later (last ADR 3.0).

  Reference:

  • Marc Sewtz: PDF printing with Oracle Application Express 4.2.2
  • http://www.Oracle.com/technetwork/developer-tools/Apex/learnmore/custom-PDF-reports-1953918.PDF
  • Re: Printing with APEX 5.0 PDF

  NOTE: The links are for APEX 4.2, but they still apply for APEX 5.0, if you plan to use ADR 2.0 and later versions. These links show how to configure ADR as a print server and how to design and print reports.

  I hope this helps!

  Kind regards

  Kiran

• How to load Windows "On-screen keyboard" application using LabVIEW

  Hello

  If someone can tell me how to load windows "On-screen keyboard" application using LabVIEW.

  Kind regards

  Bharath

  
  

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HOW TO set UP or specific graphic processor associated for applications using 3D graphics video and/or

  Switchable Graphics appears saying: «...» ", the application uses 3D graphics and video, but is not currently associated with a specific graphic processor.

  I am not able to configure it.
  Help!
  Thank you.
  MK

  Is what kind of PC/Laptop? Some use a separate program to configure the use, and others are in the BIOS to turn on and off.

• How and where should I go to find out how to configure my joystick so I can use the joystick to use the flight simulation game that I bought from microsoft?

  I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?

  Hello

  1. what happens when you connect the joy stick?

  2. do you get an error message?

  3. what version of Windows are you using?

  Perform the steps mentioned below and check if that helps:

  Step 1:

  Flight Simulator x: using a gamepad

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624

  Step 2:
  Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.

  (a) connect the joystick to the USB port via the adapter.

  (b) see if it is detected.

  (c) Windows should recognize the new hardware and set in place to work properly.

  If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.

  Step 3:

  I suggest the following steps and check for the device.

  1. in Control Panel, open game controllers. To do this, use one of the following methods:

  a. click Start, typejoy.cpl in the Search box and press ENTER.

  2. click on your game controller, and then click Properties.

  3. on the Test tab, test the game controller to verify functionality.

  Here is the link:

  http://support.Microsoft.com/kb/831361

  I hope this helps.

• I use aol for my mail and need to use outlook for some contacts in my address book. How to configure an outlook account?

  I use the aol email. You can use outlook exp for some contacts. How to configure an outlook account?

  In your topic say you Outlook but in the body, you say Outlook and Outlook Express.  Who is this?  They have different agendas.

  To access AOL, you use an IMAP account.  See AOL own help pages for the configuration.  http://about.AOL.com/FAQ/openmailaccess