IOM SysAdmin does not create an instance of the application

Similar Questions

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Abobe cc2015 muse does not - it says 'cannot open the application "Adobe Muse CC 2015". -10810 "

  Hi guys - I just downloaded the latest version of adobe muse cc2015 have the latest in dock and it does not - it says 'cannot open the application "Adobe Muse CC 2015". -10810 "

  Any ideas how to fix this greatly appreciated...?

  Hello Akshay,

  Yes Muse works on my iMac again

  Thank you very much for your help

  Von meinem iPhone gesendet

• Adobe lightroom does not update when I use the application manager to download upgrades.

  Hello

  I have problems with adobe lightroom.  It is not updated when I use the application manager to download the new updates.  I tried to uninstall the application and re-download it, however the application manager will not allow that to happen because it shows that it is already installed and up to date. I think that the problem may have started when I installed lightroom using a link which you offered when creative cloud first started offering of lightroom.  This version of the program does not appear to work with the application manager.  Please let me know what I should do to fix the problem.

  Best regards

  S

  Hello

  Please, try to remove Adobe Extension manager and install again. The reinstallation of the extensions Manager try to day light the room.

  If it does not resolve that question please make a complete own using adobe cleaner tool and reinstall everything.

  Thank you

  Kapil Malik

• IOM 11.1.2.2 - new instance of the application is not visible in the catalogue

  Hi all

  I installed the Oracle Fusion Middleware Identity Management 11g R2 Media Pack v8 - 11.1.2.2...  When I created the new instance of the application, I don't see this case in the catalog. I found a similar question in the Metalink (Doc ID 1624482.1), but a workaround described it does not work for me. Workaround does not work for me is: the value "Update Date" in 'Task catalog synchronization' last value and run the job again.

  In the version 11.1.2.1 it woks fine.

  Please, can someone help me solve this problem?

  Thank you.

  Milan

  Hi all

  my colleague and I, we found a solution.

  Looks like the Sun Java System Directory Connector is not supported in the version 11.1.2.2 IOM or the bug is there. I thing it's a bug! IOM 11.1.2.2 uses more SQL select / insert when catalog synchronization task.

  INSERT INTO CATALOG (CATALOG_ID, ENTITY_TYPE, CATEGORY, CATALOG_CREATEBY, CATALOG_UPDATEBY,

  ENTITY_KEY, ENTITY_NAME, ENTITY_DISPLAY_NAME, ENTITY_DESCRIPTION, PARENT_ENTITY_TYPE, PARENT_ENTITY_KEY, IS_DELETED,

  TAGS, CERTIFIABLE, ITEM_RISK, RISK_UPDATE_DATE)

  SELECT - CATALOG_SEQ. NEXTVAL,

  "ApplicationInstance', 'ApplicationInstance', 4, 4,

  APP_INSTANCE_KEY, APP_INSTANCE_NAME, APP_INSTANCE_DISPLAY_NAME, APP_INSTANCE_DESCRIPTION, nvl2(APP_INSTANCE_PARENT_KEY,'ApplicationInstance',null), APP_INSTANCE_PARENT_KEY, APP_INSTANCE_IS_SOFT_DELETE,

  APP_INSTANCE_NAME | ' ' || APP_INSTANCE_TYPE | ' ' || APP_INSTANCE_DISPLAY_NAME | ' ' || SVR. SVR_NAME | ' ' || OBJ. OBJ_NAME, 1, 3, sysdate

  OF APP_INSTANCE, OBJ, SVR

  WHERE THERE is NO 1 = 1-(SELECT 1 OF THE CATALOGUE WHERE ENTITY_TYPE = "ApplicationInstance" AND CATALOG. ENTITY_KEY = APP_INSTANCE. APP_INSTANCE_KEY)

  AND APP_INSTANCE. ITRESOURCE_KEY = SVR. SVR_KEY

  AND APP_INSTANCE. OBJECT_KEY = OBJ. OBJ_KEY AND OBJ. OBJ_TRUSTED_SOURCE = '0' AND APP_INSTANCE_KEY =: 1

  The problem is that the object (object type?) of the connector SJSD has the value OBJ_TRUSTED_SOURCE in the table OBJ is NULL but query catalog synchronization expected value 0 or 1.

  And the solution?

  The value of 0 OBJ_TRUSTED_SOURCE. Example: update obj_trusted_source set obj is '0' where obj_key = 5;.

  But we found that supported Oracle Internet Directory 11.1.1.6.0 multiple LDAP servers such as eDirectory or Oracle Directory Server Enterprise Edition. Then I abolished SJSD connector and its application instance and installed OID connector

• How to avoid creating multiple instances of the application?

  Hello

  We have a user interface Application. The application has been set to Auto run at startup and as a Module system.

  The application has a file listener that checks all new emails.

  When we start the application from the user interface by clicking on the application icon, it seems that the multiple instance of the application is created. For this reason when send us an email to request it is receiving emails several times. Sometimes simple, double and sometimes even five times.

  public class MyApplication  extends UiApplication implements FolderListener,
          SystemListener, GlobalEventListener {
  
      // Boot
      public static void main(String[] args) {
          if (args != null && args.length > 0 && args[0].equals("gui")) {
              // code to initialize the app
              fromService = false;
              // register the notification
              Notification n = new Notification();
              n.registerNotificationObjects();
  
              Utilities.writeLog(GUID, "MyApplication GUI Starting up");
              MyApplication service = new MyApplication();
              service.enterEventDispatcher();
          } else {
              Utilities.writeLog(GUID, "OnBoardV2 Service Starting up");
              MyApplication service = new MyApplication();
              service.enterEventDispatcher();
          }
      }
  
      public void messagesAdded(FolderEvent e) {
          /// Receive messages
          }   
  
  }
  

  In this regard, any help will be apreciated!

  Thank you

  I don't know if it's your entire code, but if you register your application as a file time listener never, it is called, then you save several headphones. The listener does not cause deleted your app closes, you must explicitly remove the listener. You must either put the listener in its own class and only sign up to start or find a way to check if the listener is already registered whenever the application is called.

• Error-could not create an instance of the custom function

  Hello
  
  I'm trying to implement an extension of the simple custom function OPM 10.2. Here is the code:
  package com.oracle.determinations.examples;
  
  import com.oracle.determinations.engine.CustomFunction;
  import com.oracle.determinations.engine.EntityInstance;
  import java.util.Random;
  
  SerializableAttribute public class RandomFunction extends CustomFunction {}
  public Object evaluate (EntityInstance entityInstance, Object [] items) {}
  
  If (items [0] == null) {}
  return 0;
  } else {}
  -Code to generate a random number
  }
  }
  }
  
  The xml extension is the following:
  -< extension >
  -< features >
  -name of the function = "RandomFunction" type return = 'number' >
  < name arg = "enterednumber" type = "number" / >
  < Manager platform = 'java' class = "com.oracle.determinations.examples.RandomFunction" / > "
  < Manager platform = "dotnet" class = "com.oracle.determinations.examples.RandomFunction" / > "
  < / feature >
  < / functions >
  < / extension >
  
  I placed the code extension xml under the Development\Extensions\Examples folder and the jar file named "JavaLibrary1" containing only the above mentioned code is under Development\Extensions\Examples\lib.
  
  The rule that calls the custom function is as follows:
  the random number = RandomFunction (figure)
  
  I get the error "Unable to create year instance of com.oracle.determinations.examples.RandomFunction" when I debug the project.
  
  Please tell me how to solve this problem.
  
  Thank you
  JAS

  Received your email and found the problem. The problem is the custom .NET, function definition is invalid, and must be (or must be removed).

  When you are debugging with screens, it uses a combination of dosages of Web for Java and the host of the debugger, which takes place in .NET. Although the modules runs into reality in the determinations of web, the debugger needs always to be able to open the modules locally for purposes of reflection (eg. obtaining a list of all possible attributes and the type of data). Even if the modules is not actually executed in .NET, it must therefore be loadable, which means that if you do not provide a custom function .NET Manager, it must be valid. This:

  >
  
  >

  Does not appoint a .NET class, that's why the debugger complains. Delete this line (only the Manager of java leaving intact) and your example works.

  >
  You also mentioned that the random function is not a good choice, that means that the engine of dosage will not work with the random function?
  >

  Yes, a random function will not work because the engine must be (and is optimized to be) deterministic - same entry should always produce the same result.

  It is difficult to imagine what you can in theory of random numbers for (otherwise), but if you don't need, you may either) front of seeds new sessions with random inputs as attributes of basic (requires customization of your host application, for example, web determinations) or b) generate the random number from other values in your modules such as the customer, name and date of birth. This should ensure that the same combination of inputs will result in the same number of 'random' each time.

• export from 8i to 11g does not create an object in the default tablespace

  Hello

  I exported and schema from oracle 8i and I try to import it in oracle 11 g in a different architecture (8i is sparc. 11 g is x 86)

  I created a user with default tablespace and tablespace of origin does not exist in this database, but I get the error message;

  IMP-00003: ORACLE error 959

  ORA-00959: tablespace "TS_ARCCLAIMS_DAT" does not exist

  If I create an indexfile and create all the objects by removing the REM of the indexfile I countless errors grouped so I bet that this is not an option.

  This is how the user is created in 11g:

  CREATE THE USER ARCCLAIMS

  IDENTIFIED BY < password >

  DEFAULT TABLESPACE ARCCLAIMS_DAT

  GN_TMP TEMPORARY TABLESPACE

  DEFAULT PROFILE

  RELEASE OF ACCOUNT;

  -2 roles for ARCCLAIMS

  GRANT CONNECT TO ARCCLAIMS;

  RESOURCE GRANT AT ARCCLAIMS;

  ALTER USER ARCCLAIMS ROLE DEFAULT ALL;

  -1 system privilege for ARCCLAIMS

  GRANT UNLIMITED TABLESPACE TO ARCCLAIMS;

  -1 contingent of Tablespace to ARCCLAIMS

  ALTER USER ARCCLAIMS QUOTA UNLIMITED ON ARCCLAIMS_DAT;

  What should I do to have the items to go to the user's default storage space?

  Thank you

  Mario G.

  You can try this:

  Export file DDL extract.

  imp file % = test.dmp = full test/test display y = log y =

  Use the log file to create the table first, and then ignore object creation errors.

  imp file % = test.dmp = full test/test is ignore = y

  EXPLANATION

  ===========

  Doc 1058330.6 - pl DO NOT send a content - it is a violation of your Support contract >

• NotifyIcon() does not work when integrated into the application (.exe)

  Hey everybody,

  I use the NotifyIcon() of System.Windows.Forms.dll (.NET 2.0) to create a menu for the handling of an application. I started work with the example shown here http://zone.ni.com/devzone/cda/epd/p/id/3915and the code works when running in the IDE of LabVIEW.

  However, when I build the code in an executable file, the icon not during execution. Someone has an idea of what could be the problem?

  My code is still very messy (still in try-everything-and-see-what-works phase), so I will clean it before returning and detachment.

  For reference, I'm doing a system-tray only monitor for a NI DAQ 6009. Program begins in the system tray and begins to record data. The user can right click to display the main window where he can change the interval plots or update view.

  OK, I got it working!

  It turns out that I had a few errors:

  1. when I copied on the System.Windows.Forms.dll, I also need to copy System.Drawing.dll because I used during the creation of the icon.

  2. I had the .dll files in the build directory, but I forgot to include the icons used by the program.

  It turns out that the NotifyIcon() has been called, but a picture of the icon was never created! So why I couldn't see it...

• [Bug of LabVIEW report] 'Create all the constants' does not create a constant for the controls when mixed with flags

  The shortcut of the comics 'Create all the constants' cannot create a constant to a control when it is mixed with flags:

  

  Colors of the palette is a table control, the other two are indicators.

  

  results in:

  

  With the help of the 'constant to create' (which is something else altogether) works very well with the table control (of course, the constant is not connected to the Terminal in this case).

  Tested in LV 2016 64 bit on Windows 7

  You can change the functionality of the right click plugin by opening the Terminals_core.vi all the wires in the .llb following and by removing the structure of matter on the image below (keep remove it just method the structure around him). He did what you wanted in the original post, but is not very useful when you start to use it on items with multiple terminals (especially multiple output terminals). The code makes it seem quite expected, he travels all terminals it concludes and checks whether it is an input or output terminal. If it's an entry, it creates a constant, if it is an output, it does nothing. The change that I did just creates a constant whether it is an input or output.

  time Board \resource\plugins\PopupMenus\edit and diagram\Wire all Terminals.llb Unwired

  

• Lightroom does not start.  Error Msg: "the application does not start correctly: 0xc 000007b.

  I have tried everything I know how to do: run in compatibility mode, uninstall, update from 4.1 to 4.3, repair of chkdsk, ideas, searched the forum and online, many suggestions but nothing works.  I hope someone can help, I'm on a shooting trip and I'm dead in the water.  Photoshop and Bridge and everything work fine.  I was running Lightroom very well too, then one day I got the error and it has not opened since.

  
  Thank you

  A search of this forum for 0xc000007b would have easily found the answer.

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

• OfficeJet 4500 scan does not create a file on disk

  Recently purchased, this replaces a PhotoSmart HP 2570, no problem with the software install, printer setup, network (ethernet connected), etc. Print and copy of work. Did not try the fax. Scan to file (pic to file) does not create a file on the disk that you use the HP Solution Center or on the button scan Panel before starting the scan.  "Preview scan" and "launch Windows Explorer in the save location after saving the files" are both checked.  I also used different 'save locations' and even created a new subfolder "temp1" from the root C: and set security to be "full control" for all of the listed users.  During a scan, all works well until and including the scan preview projected.  When "Finish" is selected, a progress dialog box is shown with a message to «Finish the scan of the computer...» "reasonable given the"Save location"by which the progress bar gets about 2/3 full and then disappears.  Windows Explorer does not start in the save location and there is no file created anywhere on the disk.

  Appreciate sincerely all serious and constructive comment.  If I don't get this resolved, I need to go back and return to the PhotoSmart...

  Download and run this HP critical update for their software v13.

• Does not create a folder takes during recording

  I'm working on a project in logic. When registering, I usually use cycle check and choose the best catch in the take folder. For a case in the song, I found it easier to use punch in recording. I don't know what other changes I might have inadvertently done, but now that I go back to the recording of the cycle, it records in cycles, but does not create a take folder. Punch in the feature is disabled and all my settings registration are set to 'Create takes the file. " Please help, thanks

  It fixed... The button replace was turned on... always wondered what was done.

• the call firefox.exe - ProfileManager does NOT open the Profile Manager does NOT create a new profile, KILLS the old session tabs, but all pinned!

  FF 7.0.1 on Win7 pro 64

  A behavior more bug / odd:
  calling "firefox.exe - ProfileManager".
  -do NOT open the Profile Manager,
  -does NOT create a new profile,
  -seems to do NOTHING (no change around records profile etc.).
  but...
  -KILLS tabs former session.
  -KILLS old session and leaves nothing to restore,
  -KILL all my pinned tabs!

  OK, I should downgrade to FF4.0.1, or same 3.6.x?
  These releases are much more reliable than 6 + 7 running!

  Try using this:
  
  Firefox.exe Pei

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.