Iomega Home Media Network, Cloud edition - sharing "is not a valid path.

Similar Questions

• 2 TB Cloud Edition - Gone of the Iomega Home Media Network Hard Drive network

  Yesterday morning, I was able to copy a video file from my laptop into the HMND2. Once it finished copying I clicked on another folder within the HMND2 and he just spun and spun. I stopped and started the HMND2 and waited for it to be available. As soon as it was available (could see through the network and the Manager), each share folder was empty and use above shows nothing. Please indicate what are my first steps? The unit is still under warranty. TIA.

  Hi bmorehoo,

  If you stop the power off while he was between processes, it could cause errors on the disk or device. I recommend contacting technical support as you are covered by the warranty and support is free.

• Iomega Home Media Network Hard Drive dead

  Hello

  My HDD network collapsed Iomeag a couple of years of work.

  I looked at the cost of retrivle data and he let one hand, I can't afford it.

  However all my children childhood pictures are here and I really want them.

  Finally, I decided to give him a miself. I looked online and hooked up again, he made a clicking sound at the beginning, but it would not appear on the desktop.

  then the collapsed rattling again! and the white and red light would come to the top.

  I took the hard drive from the Iomega case and attached directly to the computer with a hard drive docking station. Still no sound and I can see the desktop.

  any suggestions?

  Help, please!

  Hello sshans,

  From what you describe, I expect that the car broke down.

  There is nothing I can do to help a hardware failure.

  As mentioned on some other threads, UFS Explorer can sometimes help recover data from our RAIDs, but there is no hotfix for a hardware failure.

• Too little free space (IOMEGA Home Media Cloud Edition)... How to make more free?

  I just got a used Iomega Home Media Cloud Edition (2 TB).

  I did a reset (small button on the back) and you can use etc.

  HOWEVER:

  It reports:

  I did a full factory reset (after concluding that in the manual).

  Now everything seems fine:

  Model: ST32000542AS, CC38
  Size: 1.8 to
  Available storage: 1.8 to

• White lights on Home Media Network Hard Drive Cloud Edition (2 TB) is flasshing

  Hello

  I am new to this community and unable to post a comment.

  I have a Home Media Network Hard Drive Cloud Edition (2 TB), its not start. Flashing white lights on the NAS. I can't ping the ip address of my SIN, but I am not able to FTP/open it.

  If I reboot the drive several times I am able to FTP but not able to http it.

  These products are on warranty and tech support advised to reimage the firmware, but I'm afraid that my data will be lost.

  Is there anything else I can do to solve this problem.

  Concerning

  Samrat Sharma

  Hello Andrew,.

  Thanks for your reply. I tried to connect the NAS to my computer but I don't have an ip address other than the IP address of my own system.

  Well, I tried to reimage using the tool provided by technical support, it solved my problem and the interesting thing is that my data is also available and it did not wipe out.

  I follow a few more days and will let you know if the problem persists.

  Concerning

  Samrat Sharma

• Specifications of IOmega Home Media 1 TB NAS storage

  I have an IOMega Home Media drive that I bought a few years ago now (http://www.iomega.com/about/prreleases/2009/010509_home_media.html) and decided to start using it primarily as a server for my high-resolution audio. It is to be newly acquired Setup for my network Naim UnitiQute streamer. However, I have discovered since the performance of the NAS IOmega is pitifully bad and is actually unusable for its intended purpose. For example, it took well over 24 hours to remove 100 GB of old media (my low resolution itunes library and other things). So I can actually stream high resolution to my Naim network drive, I need to buy another drive superior performance NAS, but for this I need to know the material detailed specifications of the car so I can compare these measurements with other new potential players. for example the Nas Lacie 2Big. What I'm looking for above all, is the amount of RAM and the processor clock frequency. These are usually specified in new NAS drives, but IOmega because do not exist in their own right over and Lenovo did a pretty bad job on acknowleding the existence of older IOmega products, its very difficult for me to find this information. I need this information to help me not to buy a new NAS drive that is simply not up to par, so thanks in advance. There may be a link to the specifications of the product on Lenovo somewhere.

  Hi yebbi,

  You can find the specifications of this device here: ftp://ftp.iomega.com/com/launchkit/mediahomenetwork/pri_34336_home_media_nhd_500gb.pdf

• 3 TB Home Media Network complete

  I have a 3 TB with about 120 GB of music drive, and the drive is indicating that it is full. Counsel would be appreciated it says Go 2560 are in other actions which there are not. The amount of free space on your Home Media Network Hard Drive is less than 2% of your total capacity. Home Media Network Hard Drive Version: 3.2.3.15290 2012-03-13 13:27Memory:249.66 MBIP Address:192.168.1.3Time:07/14/2014 7:55pmSecuritysecurity is off thank you for your advice. Other: 2650,68 GB

  You can check this link:

  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/27324

• Home Media Network Hard Drive, Cloud Edition on windows 8

  Hello, I would like to know how to use disk hard mid with a computer running windows 8, instalation CD software doesn t work

  Hello, configure your Media Network Hard Drive Cloud home edition Windows 8 (.1) is quite easy.

  You can consider installing the update 8.1 for Windows first...

  But nonetheless go to the Lenovo Web site and download the latest version of the LenovoEMC Storage Manager.

  1.4.4.14439 worm.

  It works somewhat like the Iomega software former.

  (Assuming that your device has the latest firmware installed and everything is set up properly it should work fine.)

• Iomega home media cloud edition & usb storage

  Hi, I am running low on space on my Iomega nas media so server thought I would use the USB port to add extra storage space.

  The new drive appears ok and appears as a share, but I can't seem to get my dlna client to see any media on the drive - I have configured to be a media player and re-scanned but I see nothing on this record from my TV.

  Is there anything else I need to do?

  See you soon

  Jimmy

  Seems a bit unnecessary addition of support for USB drives then...

  In the end I got it working by manually adjusting the Twonky media server to check the USB key, was a bit of a faff however.

• Home Media Network HD Cloud Edition firmware upgrade of the system deteriorated

  I tried an update of the firmware of the device. He got all the way to reboot and then hung up. Flashing white LED on the front on a regular basis and the web management page will not show anything else that "restart" and a frozen progress bar. The strange thing is, I can mount the drive very well and access the data of all the PC's on my network. It seems that only the management of the reader part is hung up. I wouldn't really care except I like close properly the device since the management web page. Things I've tried: 1) power off with power button 2) factory for 30 seconds reset 3) unplug the power cord nothing had no effect. Suggestions are greatly appreciated.

  Just in case someone of another land here seek to solve this problem, I installed OpenMediaVault on the device by following the instructions icies: http://stefanseidel.info/OpenMediaVault. It took less than an hour and the device is now fully functional. And it is using all software open source! So I'll call that a victory.

• Iomega Home Media Cloud Edition - new action deleted existing shares

  I had about 8 actions on this hard drive for years without problems. Now, I created a new share and everything is fine - the new action is perfect. However, none of the old shares no longer. I know that the data is always there b/c the info reader shows approximately half of the disk used and I have not put in the new share yet while MUST be old data. Anyone know how I can get my old shares back then I can access it? Thank you for ALL the ideas!

  Hello WallyB4WJ,

  Try to (re) creating one of the actions by creating a "new" share with exactly the same name (including caps) among the 'old'.

• Iomega home media hmnd2 becomes inaccessible after a power down

  Hi all

  I have a hmnd2 that I had for years. After that a recent unexpected power down I no longer accesses through my home network. Ping the ip address returns no response. white light on the front is on and I can hear it running, but I have no access. at startup, I hear a form of slight movement of the hard drive, but then it goes quiet. I tried the reset button, but no luck. also tried through the usb at the back. My Network senses there is something out there but can not load a driver (and so it remains inaccessible). I guess that the material is ok, but OS does not or something like that.

  someone at - it ideas? thnx guys.

  Rgds,

  The f

  Hello jeffga,

  You can contact support and request an imager, it can get the NAS running again:
  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722

• IOmega home media storage USB CE?

  Dear friends,

  I want to know if I can connect to USB a WD My Book 4 to?

  Because I need to expand my storage and I want to buy this drive.

  Thanks in advance!

  mosquerad,

  Partitioning of a WD 4TB drive down to two partitions of 2 TB is usually the two available partitions.

  However, you cannot remove one without the other disassembly.

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• Iomega StorCenter ix2 Network Storage Cloud Edition upgrade 3.0.9

  Hello world

  I have an Iomega StorCenter ix2 Network Storage Cloud Edition (ix2-200).

  The NAS is currently leading the 3.0.9 software, which is the version it comes with.

  The 'upgrade' button in the web interface does nothing, while the NAS should be able to run the 4.1 software being a "Cloud Edition".

  Can someone tell me the procedure to upgrade the 3.0.9 software for the latest possible?

  See you soon,.

  Filippo

  Nope. I know that you won't be able to pass the 'border' 3.2.6 join .x:
  "3.3.2 below is unable to upgrade to version 4.1.102.29716.