Iomega StorCenter ix2 Network Storage Cloud Edition upgrade 3.0.9

Similar Questions

• Home Media Network HD Cloud Edition firmware upgrade of the system deteriorated

  I tried an update of the firmware of the device. He got all the way to reboot and then hung up. Flashing white LED on the front on a regular basis and the web management page will not show anything else that "restart" and a frozen progress bar. The strange thing is, I can mount the drive very well and access the data of all the PC's on my network. It seems that only the management of the reader part is hung up. I wouldn't really care except I like close properly the device since the management web page. Things I've tried: 1) power off with power button 2) factory for 30 seconds reset 3) unplug the power cord nothing had no effect. Suggestions are greatly appreciated.

  Just in case someone of another land here seek to solve this problem, I installed OpenMediaVault on the device by following the instructions icies: http://stefanseidel.info/OpenMediaVault. It took less than an hour and the device is now fully functional. And it is using all software open source! So I'll call that a victory.

• Iomega StorCenter ix2-200

  I had the ix2 for a while, it worked perfectly. Once before, one of the drives has failed and I got a replacement of Iomega. Reconciled unity drives and everything was fine. Since then the camera has worked flawlessly again so far.

  During the last two weeks, the player became undetectable on the network of one of the two computers in the sharing network. The white light on the front flashes constantly. There is no indication that the drive is alive. I removed the disc and individually attempted to find any content on them. There are two partitions on each, but I can't get windows 7 to read on the part of the partitions. I don't know how they are formatted.

  (Or both) installed in the ix2, still just white light flashes on relentlessly. With no disc in the ix2, the light still flashes. Press and hold the power or reset button and power cycling the unit have no effect of the flashing light.

  What can I do? I have just the scrap drive and say good bye to my data?

  ARK,

  You will need to contact a professional data recovery service if you need data from these readers.

  The only thing that we can do that could get the NAS to start in the situation you describe is destructive data.

  If you are under warranty, you can submit a ticket for support here:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Iomega StorCenter ix2-200 how automatically save everything on the NAS to my external HARD drive?

  Hey, I have a WD 3 TB my book around the pose I want to connect to my IX2-200 and use the external hard drive to automatically back up everything that's stored on my NAS.

  How can I do this?

  Thank you.

  Not sure wheter ix2 is able to work with > 2 TB is spread over its USB ports, but normally you would create a copy job that contains "all directories".

  If your ix2 doesn't detect your USB, try to repartition your drive USB-2 to + 1 TB

• How small discs I put in the Iomega StorCenter ix2 - dl?

  I'm sure it sounds like a crazy question, but I have a client who is not really need terabytes of storage on their NAS. 2 2 x 500 GB drives would be more than enough. They need to back up both PC.

  I saw a table here https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/30797 that specifies approved 1 to 3 to disk. What small readers and why?

  Any suggestions?

  Thank you

  Russel

  Hi RDFouts,

  500 GB drives should work as long as they are a manufacturer reputible, like the ones we have on our list of approved readers. Additionally, make sure that both hard drives are of the same manufacturer, capacity, and speed control.

• Too little free space (IOMEGA Home Media Cloud Edition)... How to make more free?

  I just got a used Iomega Home Media Cloud Edition (2 TB).

  I did a reset (small button on the back) and you can use etc.

  HOWEVER:

  It reports:

  I did a full factory reset (after concluding that in the manual).

  Now everything seems fine:

  Model: ST32000542AS, CC38
  Size: 1.8 to
  Available storage: 1.8 to

• Ix2 - 200 cloud Edition cannot connect to the site of the system remote win8

  Getting message "Unable to connect to xxcloud" in the Storage Manager (ver. 1.4.4.14439)

  Everything looks ok on the main system (Win7) Green everywhere check :-)

  Open port 80, 443 & 50500-50599

  Cloud Edition ix2-200-DC386F FW 3.3.2.29823

  Any suggestions?

  so you must enable the automatic configuration of UPnP on your router... after that, you should be able to connect on your IP

• White lights on Home Media Network Hard Drive Cloud Edition (2 TB) is flasshing

  Hello

  I am new to this community and unable to post a comment.

  I have a Home Media Network Hard Drive Cloud Edition (2 TB), its not start. Flashing white lights on the NAS. I can't ping the ip address of my SIN, but I am not able to FTP/open it.

  If I reboot the drive several times I am able to FTP but not able to http it.

  These products are on warranty and tech support advised to reimage the firmware, but I'm afraid that my data will be lost.

  Is there anything else I can do to solve this problem.

  Concerning

  Samrat Sharma

  Hello Andrew,.

  Thanks for your reply. I tried to connect the NAS to my computer but I don't have an ip address other than the IP address of my own system.

  Well, I tried to reimage using the tool provided by technical support, it solved my problem and the interesting thing is that my data is also available and it did not wipe out.

  I follow a few more days and will let you know if the problem persists.

  Concerning

  Samrat Sharma

• HMNHD Cloud Edition - Urgent SSL software!

  Hi guys,.

  I suppose that everyone has heard of the critical software bug in SSL now.

  My question is, our drives hard network (for example the HMNHD Cloud edition) to an update of their firmware because they use SSL for tips and secure Web interface.

  Just a question because the last frimware is 2012.

  LenovoEMC confirmed that the OpenSSL software security hole affects the px4-400r and px4 network storage devices - 400 d. It doesn't affect any other LenovoEMC or Lenovo network storage products.

  LenovoEMC working on a permanent fix on the px4-400r and px4 platforms - 400 d and will release an update of the firmware of lifeline from the development and test can be completed. If you have a px4 - 400 d or px4-400r, please check back for updates.

  Consult the notice of US-CERT on this issue for more details: http://www.kb.cert.org/vuls/id/720951

  To mitigate the risk of this vulnerability, follow standard security practices:

  -Protect your network and your NAS device with a firewall.

  -Enable security on your network storage device to control access to the management interface of device and stored content.

  -Change your admin login password frequently and always use strong passwords.

  -Always disconnect from the device management interface when you do not use.

  -Restrict access to the management interface of device to trusted users.

  Refer to the guidelines on the best security practices for more information about the protection of your NAS device and content stored on it.

• StorCenter ix2 latest firmware 2

  Hello

  I'm new to Iomega StorCenter and I'm a little confused in all models and firmware upgrade procedures.

  Ix2 is currently running firmware: 2.0.3.41008

  P/N: 31787100 R

  Model: NHDD2M

  I ' v found a topic for firmware v4 for ix2 who need the firmware before v3.3.2. But this last one it requires v3.1.

  Which is the latest firmware, so I can run on my ix2?

  Thank you

  Vincent

  Hi nolme,

  Firmware 3.x and 4.x are for newer models of the ix2. Here is the latest version of the firmware of your device: StorCenter ix2 Firmware Version 2.0.18.23122: Read First

• Windows 7 Home Premium cannot map NAS / network storage drives

  Hi, I'm currently on a PC Windows 7 Home Premium and I have two 2 NAS drives.

  I am running a Buffalo Linkstation (old version) and a new Iomega Home Media Network Hard drive.

  Initially I thought it was just my Linkstation from Buffalo who is older and has had no updates of the firmware that cannot be mapped as a network drive. But I just got my new Iomega hard drive today and installed the latest firmware and software. The Iomega software detects the drive and all of its shared folders but the problem is that I can not map any shared folders as a network drive, making it useless on my Windows 7 computer.

  I can access both NAS drives on my windows xp pro machine very well.

  I got off the phone with Iomega technical support and they said that it is a well known problem with Windows 7 Home Premium and readers of Samba. Is there someone out there who can give me a solution? I already tried the fix LMCOMPATIBILITYLEVEL on other forums I found by changing the values 1 or 2 - but still no luck.

  It gives me an error of network even when I try to connect to the ip address of the NAS, however - it appears on my network but I can not access or map!

  I really want to get my readers network running on windows 7 Home Edition premium without having to upgrade to other users are still having problems, I read. It's a little pathetic I can't even map a network drive on my pc.

  I had exactly the same problem with my drive hard Lacie network. If your drive contained donkey type of media, music, or video, Win 7 use the reader as a "Windows Media Connect" device, opening the disk in Media Player, showing only media files...

  This prevents access to all ot0her of the player records.

  However, I found that it is possible to add the drive as a network drive, if you know the name of the root folder.

  In my case, it's "openshare", so when you enter the path to network drive, I use \\192.168.xxx.xxx\openshare, and it allows me to access the drive...

  Why Microsoft chose to make this type of access to the files of so difficult to get simple network, just blows my mind, knowing that WinXP has it done easily...

  I hope you were able to understand my English, and that this could be useful.

  Kind regards

• How to reset the password for iomega storecentre ix2 without losing my data

  Im having a problem accessing the iomega storecentre ix2. I can not connect on the nas server. How can I reset the password without losing my data on it. It is avisable to reset using the reset button without losing my data?

  Thank you!

  AJ

  Hi altagumasi,

  The reset button of the pinhole on the rear panel of the unit resets user and network settings. It will not delete your data. Press on the reset button for 15 seconds and the device should restart. After the reboot, you will go through the initial setup process.

• IX2 - usb storage device?

  I have a storcenter ix2 and wonder if it can be used as USB storage connected in local device or is it strictly a SIN?

  Thank you

  DTK,

  The ix2 is strictly a NAS.

  However, these things can be circumvented these days.

  If you are inclined to do, you can buy a USB adapter to Ethernet and / access handle the actions in this way.
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=USB+to+Ethernet+adapter

• What happens when two computers call the same code stored in networked storage?

  We have our code on the network storage and have worked on a single computer code.  We have now replicated our configuration and want to use the same code to run the new installation to another computer.  We want to run simultaneously both configurations (both using the same storage networking code).  Will there be conflicts here, or both computers load their own copy of the vi to run from?  I must say that we do not have global variables.

  I am interested in the answer to this question anyway, but I'd be happy to hear any suggestions (or even critical) on how to do what we do.

  You should seriously consider a source control system, which is the best solution here. This gives you an original copy of the code on the network. Each computer retrieves the latest revision of the source control, make a copy on the local disk. Source control keeps a good backup and allows you to track and compare the versions or to return to the old code, when something breaks.

  I'm fairly certain that you can open the same screw that is stored on a network drive on multiple computers simultaneously. Global variables are not relevant here. Each computer is independently responsible for the screw in memory. The problem is if edit you and save the VI on a computer while it is open on another, and if you make changes on both at the same time, will certainly lose you some of her edits and could possibly corrupt your VI and lose all, that's why you should use a source code control system.

  If you have the request of the manufacturer, I recommend your building code in an application. You can store the network application if you want and run it on multiple computers.

• How can I activate the storage cloud life 25 GB (box)

  I bought a HP 110-243WB PC desk top. How to activate the life 25 GB storage cloud (box) that came with the computer?

  Cloud is actually a 3rd party software. Yes, it can came with HP when you first bought the pc, but for the activation of which you can communicate with cloud because they need to carry out some sort of record.