IOS 10 fingerprints failed

Similar Questions

• Fingerprinting fails after updating iOS 9,3/9.3.1

  Long story short : iPhone 6, I downloaded iOS 9,3/9.3.1 of fingerprint scanner stopped working the same day.  Apple refuses to acknowledge the update of iOS could have abandoned my scanner.

  I downloaded the update from iOS9.3 about a week ago.  That day and all the days after, my phone turns off randomly several times (forcing me to restart it).  In addition, the same day of the 9.3 iOS update, the fingerprint reader has stopped working.  I'm very well on my phone so I thought it must be a problem of update.  I went into settings/privacy, trying to set up the scanning of fingerprints and it wouldn't let me put a new stamp in and jumping right to a screen "Fingerprint has failed."  A few days later, I downloaded the iOS 9.3.1 update (hoping it might solve my problem), and he did not.  In fact, the 9.3.1 was unable to completely download update and forced me to resort to reinstall a backup.

  Later, I went into the Apple Store, and they said that an update could never do that to my phone, and my phone screen needs to be replaced.  Then, after insisting to ask a co-worker for a second opinion, she came back and said she talked to 3 different employees at the Genius Bar, and that the update would not have abandoned my fingerprint reader.  Then she said I have to buy a new phone, and they couldn't fix it.  If I had not been a loyal customer of Apple, then I would have thought for sure they were trying to get just upgrade me to the next model.  Has anyone else encountered this problem?

  7lb sausage wrote:

  Long story short : iPhone 6, I downloaded iOS 9,3/9.3.1 of fingerprint scanner stopped working the same day.  Apple refuses to acknowledge the update of iOS could have abandoned my scanner.

  I downloaded the update from iOS9.3 about a week ago.  That day and all the days after, my phone turns off randomly several times (forcing me to restart it).  In addition, the same day of the 9.3 iOS update, the fingerprint reader has stopped working.  I'm very well on my phone so I thought it must be a problem of update.  I went into settings/privacy, trying to set up the scanning of fingerprints and it wouldn't let me put a new stamp in and jumping right to a screen "Fingerprint has failed."  A few days later, I downloaded the iOS 9.3.1 update (hoping it might solve my problem), and he did not.  In fact, the 9.3.1 was unable to completely download update and forced me to resort to reinstall a backup.

  Later, I went into the Apple Store, and they said that an update could never do that to my phone, and my phone screen needs to be replaced.  Then, after insisting to ask a co-worker for a second opinion, she came back and said she talked to 3 different employees at the Genius Bar, and that the update would not have abandoned my fingerprint reader.  Then she said I have to buy a new phone, and they couldn't fix it.  If I had not been a loyal customer of Apple, then I would have thought for sure they were trying to get just upgrade me to the next model.  Has anyone else encountered this problem?

  No, upgrade 9.3 of the day, he was released, no problem with not touch id, same with 9.3.1 put on daily basis, he was released and have no problem with my contact id.

  So not an IOS update may cause the malfunction of your contact id.

  Use the ID Touch on iPhone and iPad - Apple Support

• iOS 10 update failed iPhone 6 now frozen on the Logo screen

  I connected my iPhone 6 (he was stuck in endless loop Recovery Mode with closed force) to iTunes and tried to update to iOS 10. After about 20 minutes, the update failed. Now my phone is frozen on the Logo screen with the loading of updated under him bar. Force restart it brings back me to the screen in recovery mode.

  I also tried to use another cord, restarted my computer, update iTunes... nothing seems to work. I tried this several times in the last 36 hours with ZERO luck.

  MY camera got in as recovery mode well once completed the download of ios 10 on itunes.

  I had to unplug my phone and plug it in again... Make sure that all drivers are up-to-date. attention to any message of warning or error code filling on your itunes.

  ITunes and the computer must be updated. the cable must be the original.

  Although I made a backup, recovery mode was not something I wanted. It worked for me, once I followed this step.

  Install the latest version of iTunes. (12.5.1.21)

  1. Restart your computer.
  2. Automatically search for updates of your Mac or PC. If you restart your computer for an update, check the updates again after the reboot.
  3. Strength of your unit to restart. ()When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device. If the download takes more than 15 minutes and the device out of recovery mode, let the download is finished, then repeat these steps.)

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch - Apple Support

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• New IOS 9.3 fails to activate on ipad 2

  9.3 installed IOS fails to activate on IPad 2 - hang up the system?

  It is a known problem/bug.

  Apple has, officially, recognized and acknowledged this problem with difficulties with some models of iPad activation server and have stated that they are working on this issue and it will be resolved as soon as possible.

  I hope more early.

  It mainly affects the iPad models 2, but iPad 3, 4 and 1 st Gen what ipad mini are affected, as well.

  There are workarounds, but, unfortunately, they do not work for all concerned iDevice.

  This is clearly a problem/issue Apple that they have time to sort and resolve.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now iOS 9.3 updates due to activation server more locking problems.

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

• iOS Application 'A' failed to install - Air 3.0

  I have the most difficult time to get iOS apps to install on my iPhone.  Whenever I build my application it tries to install it on the device before returning to say "unable to install" on the phone.

  I tried all code related questions and began a new project Hello World with a label in him withdrawing.  I managed to get to install once, but then it failed after each time.

  NOTE: I use it on a windows machine, as I have no funding to buy a mac box

  Here are the steps I took:

  1 has received a request from OpenSSL cert

  2 added demand on the supply Portal

  3 downloaded real cert

  4 use OpenSSL to convert the cert for one. PEM

  5 use OpenSSL to convert the. PEM to one. P12

  6 added my UDID device on the portal of supply

  7 added my id of the application on the portal of supply

  8A obtained a configuration file for that Setup

  9 built my application using the configuration file and cert

  10 copied the file of configuration on iTunes

  11. copy of the application to iTunes

  12 sync the phone, it tries to install, then the phone States 'HelloWorld impossible to install' and removes the icon on the desktop

  I have no idea what I'm doing wrong here.  I'll try with my mac of collaborators to build instead a cert on his machine and use that, but I doubt that the problem will be solved.

  I have not touched anything in the descriptor of the application at all, with the exception of putting applicationId on my application on the portal to supply profile (as it won't build without it)

  Problem solved.

  Turn, with the deployment of the iOS, you cannot use incorporate data that are stored in the src folder.  (i.e. If you have a GFX file or the fonts in the src directory or a sub package that allows you to embed data into your application, move all outsid of data in your 'src' folder in its own folder apart from that rather instead.)  Tags embed just needs to be updated to point to the correct location, but iOS will not let you install the application on the device in this scenario.

• IOS 10 installation failed

  I have a 6 s iPhone and when I try to install IOS 10 it starts installing and then a minute later shows, the message 'an unknown error has occurred (27)' I tried to restart itunes and it did not help with the problem. Help?

  Have you tried to update directly on the phone instead? Going to settings > general > software update

  or try using a different computer with the latest version of iTunes

• Update iOS 9.3 fail

  On my iPad, why do I get "iOS 9.3 failure of verification because you are no longer connected to the internet" message when I am connected to my network home wifi during the installation of the update?

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

• Help iOS 9.3 FAIL

  Hello Apple Lover´s:

  I need your help.

  Yesterday I unload iOS 9.3 in my mini iPad 2, and what happened. Well, I have can´t my iPad with my Apple ID and password to unlock.

  I need help because that's my tool of pleasure and work.

  Thank you

  PS: IF IT IS TODAY POSSIBLE!

  What happens when you put your Apple ID and password?

• failed to check the iOS 9.3 - no internet connection

  I'm updating my iPhone 5S for iOS 9.3 requested to my phone.

  The new software has been downloaded, but this message pops up when I tried to install it. The message says, 'iOS 9.3 failed verification because you are no longer connected to the internet'. This has happened while my phone is on an internet connection stable wifi with me be able to browse safari and have messages coming in and out of my mailbox and messaging applications. In addition, I can even email update iOS 9.3 on page conditions install to my email address (i.e. internet gotta work then).

  I tried several methods as suggested by others in the past is 1) killing the application settings and restart the process again and 2) resetting my network settings. Unfortunately, none of these methods does not work for me and the phone is still coming up with the same error message when I try to install the update.

  It would be appreciated if anyone can shed any light on this please.

  Thanks in advance.

  Connect your iPhone to a power supply and try again.

• set up gmail with wi - fi WE in iOS 9.3.3

  After I delete my Gmail account on my iPhone, because the device has been stuck in an endless loop, tries to send a message to the same account named "test" and checked the accounts didn't work, I decided to delete the account and recreate it.

  After 3 restarts the appliance, do not take account of iOS configuration and verify the credentials whenever I took the unit off Wi - Fi and do the same steps on my sprint 3G network, and it allowed me to save the account and continue to use it. However each time by Wi - Fi (i.e. through the T1 company) never shown backup option and the installation program would turn the animated icon iOS because he failed on a minute then dump me back on without warning, no error account creation page and without evidence other than the account never showed up.

  If it is typical of design could someone explain to me why when the cellular network is and why the iOS does not throw an error, Wi - Fi is refused this luxury?

  Thank you.

  Ignore my signature, I'm on 9.3.3

  Probably because your network blocking gmail. Talk to your IT Department.

• File.upload ActionScript does not work on Air SDK for iOS devices

  I try to use the ActionScript File.upload to transfer a file on Air SDK for iOS environment, but the File.upload does not work properly. No event on the file upload handler is executed after File.upload is called, and no exception is caught. When I check the side network traffic server, I found no application http even didn't hit the server after execution of File.upload. The code is below.

  ------------------------------------------------------------------------------------------ -----------------------------------------------------------------------

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:View ' http://ns.Adobe.com/MXML/2009 "xmlns:s ="library://ns.adobe.com/flex/spark"title ="HomeView"> "

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  private var file:File;

  private var dir:File;

  This method is executed to create a file and download it when you press the download button.

  protected void OnUploadButtonPressed(event: MouseEvent): void {}

  trace ("upload button clicked");

  var urlReq:URLRequest = new URLRequest ("http://10.60.99.31/MyPath/fileUploadTest.do");

  urlReq.method = URLRequestMethod.POST;

  var str:String = "this is test";

  var imageBytes:ByteArray = new ByteArray();

  for (var i: int = 0; i < str.length; i ++) {}

  imageBytes.writeByte (str.charCodeAt (i));

  }

  trace ("size =" + imageBytes.length);

  try {}

  dir = File.applicationStorageDirectory

  I also tested in several different directories

  dir = File.createTempDirectory ();

  dir = File.documentsDirectory;

  var today: Date = new Date();

  var filename:String = 'IMG' + now.fullYear + now.month + now.day + now.hours + now.minutes + now.seconds + now.milliseconds + ".txt";

  file = dir.resolvePath (filename);

  var stream: FileStream = new FileStream();

  Stream.Open (file, FileMode.WRITE);

  stream.writeBytes (imageBytes);

  Stream.Close ();

  Review the content of the file to check if the file is written successfully.

  var readStream:FileStream = new FileStream();

  readStream.open (file, FileMode.READ);

  var: string result = readStream.readUTFBytes (readStream.bytesAvailable);

  trace ("rear read result =" + result); The result is shown here as planned.

  file.addEventListener (Event.COMPLETE, uploadComplete);

  file.addEventListener (IOErrorEvent.IO_ERROR, ioError);

  file.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityError);

  file.addEventListener (ErrorEvent.ERROR, someError);

  file.addEventListener (ProgressEvent.PROGRESS, onProgress);

  file.upload (urlReq); This line does not work. No handler is executed. No http request struck the coast server.

  trace ("after file upload test");

  } catch (error) {}

  trace (e);

  }

  }

  Complete Manager

  private function uploadComplete (event: Event): void

  {

  trace ("Upload successful.");

  }

  IOError handler

  private void ioError (error: IOErrorEvent): void

  {

  trace ("Upload failed:"+ error.text ");

  }

  Manager SecurityError

  private void securityError(error:SecurityErrorEvent):void {}

  trace ("security error:" + error.text);

  }

  Another Manager

  private void someError(error:ErrorEvent):void {}

  trace ("an error" + error.text);

  }

  Progress Manager

  private void onProgress(event:ProgressEvent):void {}

  trace ("progressHandler");

  }

  This method is executed to call the URLLoader.load when the delicate touch.

  protected void OnTrickyButtonPressed(event: MouseEvent): void {}

  var urlReq:URLRequest = new URLRequest ("http://200.60.99.31/"); This points to a server not - exist

  urlReq.method = URLRequestMethod.POST;

  urlReq.data = new ByteArray();

  var loader: URLLoader = new URLLoader();

  try {}

  Loader.Load (urlReq); This line is very important in iOS7. He decides if the latter file.upload may work.

  But in iOS8, file.upload does not work even if that line is executed.

  trace ("after urlloader load");

  } catch (error) {}

  trace (e);

  }

  }

  []] >

  < / fx:Script >

  < s:Button = "200" x = "200" width = "400" height = "200" label = "Upload" click = "OnUploadButtonPressed (event)" / > "

  < s:Button = "200" x = "500" width = "400" height = "200" label = "Tricky" click = "OnTrickyButtonPressed (event)" / > "

  < / s:View >

  ------------------------------------------------------------------------------------------ -----------------------------------------------------------------------

  
  

  When it is run on the simulator of the Air, it works very well as expectedand the file is successfully downloaded to the server. But when run on iOS devices (in my case, iPad), as I explained at the beginning, no event on the file upload handler is executed and not the http request has even hit the server. So I think that the problem may come from the client side.

  During my attempt to solve the problem, I found something complicated about this problem on iOS7. In other words, if you call the URLLoader.load method (although the URLLoader.load points to an address non-existed) before calling the File.upload method, the File.upload will work as expected on iOS7. Specifically, when the above OnTrickyButtonPressed method is run before the OnUploadButtonPressedmethod, File.upload will succeed on iOS7. But this only happens on iOS7. On iOS8, File.upload still refuses to work, regardless of knowing if the URLLoader.load is executed before.

  I think in my case, the problem is not the problem of sandbox or a session of Firefox problem described in the two links below, because not even a http request hit the side server. It seems that the Air SDK for iOS comes to fail send the http reason request any.

  http://StackOverflow.com/questions/5967382/Flex-4-FileReference-issues-with-Firefox

  http://StackOverflow.com/questions/351258/how-do-i-make-Flex-file-upload-work-on-Firefox-a nd-safari

  To make my problem clear, I list my environment below:

  • Development environment: Windows7 (64-bit) / Mac os 10.9.4 (tested on both OS platforms.)
  • IDE: Flash Builder 4.7
  • Air SDK: 3.8 / 16.0.0 (after that I have updated to the latest Air SDK 16.0.0, problem persists.)
  • Application server: Tomcat7 + spring

  Finally, I want to mention that download the file using URLLoader.load isn't an option in my case because I want to download large files in the future, which cannot be addressed with the URLLoader.load.

  I struggled with this for days. If I really appreciate it if anyone has an idea about this.

  Thanks in advance.

  Hi KA RYU.

  We have reproduced the issue successfully, our team would work on it.

  -Tushar

• If anyone can help to update my iphone 5

  How can I update my iPhone 5?

  It is said to be impossible to check the update ios 9.3 failed verification because you are no longer connected to the internet, why?

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems

  Update: ads-affected-by-activation-lock-issue/ http://9to5mac.com/2016/03/28/apple-re-releases-ios-9-3-for-older-iphones-and-ip

• 9.3 update problem

  WWhen I try to spend 9.3 iPad, I get the following message:

  "ios 9.3 failed verification because you're no longer connect d to the Internet.

  I am connected to the Internet.

  Help!

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

• Projector does not? Try to kill background apps

  Spotlight on my iPhone Chess 6 were driving me crazy. About half the time Spotlight returns no results.

  After much trial and error I found that killing a background app, Reeder, 3 (reeder.app) solved the problem. I don't think it's a bug of Reeder, I think it's just that my habits of the user with power supply/Reeder are facing a set of 9.x bugs related to the management of background applications. I had already turned off "Background App Refresh" and Spotlight indexing most of the applications, but I still had to hit kill the background application.

  I wrote my results here: http://tech.kateva.org/2016/01/ios-9-spotlight-fail-fixed-by-killing.html.

  This may get fixed to the 9.3, but in the meantime experiment with updated death of background apps - even if you do not use Reeder. You can find one or two that are particularly problematic.

  jfaughnan wrote:

  Spotlight on my iPhone Chess 6 were driving me crazy. About half the time Spotlight returns no results.

  After much trial and error I found that killing a background app, Reeder, 3 (reeder.app) solved the problem. I don't think it's a bug of Reeder

  This seems quite as if the problem is a bug with Reeder not closing properly in the background. Most of these 'background apps' do not run in the background. They are used most recently.

• Quirk of QCC compilation.

  Hello

  I'm trying to compile code that compiles well on PC/iOS/Android and fails with QCC in the IDE.

  If I try the following:

  typedef struct tPOINT
  {
  Tint Xc;
  Tint Yc;

  tPOINT () {};
  tPOINT (hue, tint XY) {Xc = x; YC = y ;}
  tVOID Set (hue, tint XY) {Xc = x; YC = y ;}
  } tPOINT;

  I get:

  /Media/OSDisk/dev/Raz0r/source/Raz0r.H:608: error: expected specifier-qualification-list before 'tPOINT.

  (The line of the constructor)

  I have a whole stack of other errors, including one for each class in my header files (even if it is a forward declaration)

  class RZFile;

  error: expected '=', ', ',';', 'asm' or '__attribute__' before RZFile

  Is it because of the thought of QCC my. H (uppercase H) files must be compiled in C rather than C++?

  If so how to change the compiler to recognize. CPP and. H as C++ files?

  Thank you very much

  Steve.

  Thanks for the reply. It is a base of code with hundreds of files, to change all the instances of the code isn't really an option. Thanks for the reply though!

  It was as I however, the compiler does not seem to collect on. CPP and. H being C++ files, so I stuck "- lang - c ++" in the compiler options and it seems at least now compile.

  Thank you

  Steve.