iOS 9.2 creating MAJOR problems on the iphone 5 s

Similar Questions

• Hello there is a problem with the iphone 6 and you do not want to connect to the Apple Store

  Hello there is a problem with the iphone 6 in more you won't connect to the Apple Store.

  

  Buenas tardes,

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

  Then sign out of the iTunes Store and reconnect.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• Security group create a problem at the EBS UM provisioning

  Hi Expert,
  
  
  Currently, there are four security groups in my search for Lookup.EBS.SecurityGroup. Who I had reconciled EBS system.
  If I add a liability without security group or with the safety of the 'STANDARD' group, it's okay. But I'm unable to add accountability as well as of other than STANDARD security group.
  Is this problem of the IOM or EBS application problem? How can I solve it?
  
  Kind regards
  louisette

  Yes this is EBS application deliver nothing to do with the IOM.

  When we install application EBS, STANDARD security group get configured automatically.

  When we create custom security group, we need to run 2 programs in system EBS which is responsible to set up the security groups with the set of APPLICATIONS.

  I don't remember the name of the task of these programs in EBS. But, ask your administrator to do so. If you have admin EBS.

  Let me know the results.

  Kind regards
  Nayan

• Major problem with the touch screen after upgrade Windows 10

  I bought a Lenovo Yoga 3 14 "a few weeks ago and upgraded to Windows 10 as soon as I got it.

  Since I started using it, the touchscreen will be occaisionally go "crazy". Crazy is the best way I can describe it because it will start input touch by ignoring or doing his own random touch input on the screen. Nothing the laptop will start to switch between windows and opening and closing of the things.

  This laptop is not running Windows 8.1 long enough for me to know if she has had this problem before the upgrade.

  Any ideas?

  Nice day.

  For information, please see: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/td-p/20...

  and then more precisely: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/m-p/214...

  I hope this helps.

  Kind regards.

• Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

  Hello Apple community!

  I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

  I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

  I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

  Thank you so much in advance!

  PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

  Kind regards

  Marc

  Hello, m.asebo.

  It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Problem with the iPhone 6 Selfie camera

  

  I have 6 64 gb silver white iphone I am facing a problem with my iphone selfie camere, I recently see the camera gray Crescent front...

  What can I do

  Is there a case on the iPhone? If so, remove it and take another

  photo. If this clears the problem, either set the camera

  hole in your case, or use another case that does not interfere

  with the case.

  If no case or remove the case does not resolve the problem.

  make an appointment on the Apple store nearest to have rated free iPhone.

  Once the diagnosis is made, staff will explain your options.

  Make a Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• He had to find the solution to the problem of its speaker after than IOS updated 9.3.2 update on the iPhone 6 s

  My wife and I have just updated our iPhones (his is a 6s, mine is a 6 s +) to IOS 9.3.2

  Mine works fine, but hers doesn't have a speaker sound.

  Works great with wired headphones or bluetooth headset connected, but no noise regular of the enclosure.

  Tried to reload, still no sound during playback of music, test different ringtones, nothing.

  Checked to make sure that all the settings are the same as on my 6s +. Both are basic 16 GB of memory.

  Is there a simple solution for now until the bug is fixed?  We are on the annual programme to upgrade with more of Applecare.

  Take a look at the following article: If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support

  You mentioned some of the steps in your original post, but see what you haven't done yet.  Sometimes, Plug and unplug a pair of headphones sometimes solves the problem as well. -AJ

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• Major problems after the update to 10.11.2

  Hello

  I have a 2009 MacBook pro environment. I'vewalkways updated to the latest osx and have never had any problems. Since the update to El Capitan my computer worked really slow. I deleted all the old files, uninstalled I don't use and move all the files on a hard drive current of the program. With the first update to El Capitan, it would take 10 minutes to activate and load up, slow but manageable.

  Since the 10.11.2, update I have been practically impossible to use my computer at all. Now, it takes 25 minutes to activate and load up. Once its loading I can barely click an icon before her color of the wheels. It will charge finally something at the end of 5 minutes, but basically the computer is useless.

  IM wondering if anyone else has had similar with El Capitan and the problems that people would be advice to me. I plan to downgrade to Yosemite, as I had no problem then, but I've never done anything like this before, and I'm worried it will more mess my computer and then I will have no computer at all? I need to create a USB key with Yosemite on and then erase the Mac HD before reinstalling with Yosemite. I am naturally cautious but want to do what's best for my computer working again.

  Or would it be best to reinstall El Capitan and hope this sorts the problem?

  Thanks in advance

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• Major problems of the authorization.

  Hello

  Lately, my laptop has entered a beginning of serious issues.lets of this.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/updating-my-Intel-Centrino-n-6230-failed/1b11c9d9-e2ce-436f-9d76-66a3aa745905?TM=1400093497488

  I tried to update my adapter wireless (intel centrino 6230 n) I had to uninstall the previous software, so I could install a new one.

  the following error came

  http://prntscr.com/3j5blf'

  This permissions issue is confusing

  I can't install or update anything at all (my geforce experience etc.) I can't run microsoft word correctly without having the thing in the base configuration.

  I give everything that you want to solve this problem. projects are coming up and my laptop will be necessary in a short period of time.

  Thank you.

  It is almost certainly, but just uninstall it will correct not necessarily what he screwed up.

  Run Disk Cleanup to rid the system of temporary Internet files. These can seriously slow down a Malwarebytes scan.

  Then run Malwarebytes.

  http://www.Malwarebytes.org/

  When
  installation, make sure that you do not check the box to install the PRO trial
  Version...

  How
  use Malwarebytes

  http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

  Follow-up to the ADW cleaner...

  http://www.bleepingcomputer.com/download/adwcleaner/

  Do NOT click on the GREEN download button because it will bring only sadness. Use the right BLUE button below.

• Create record problem in the JHS LOV popup after deleting record

  JDeveloper: Studio Edition Version 11.1.2.2.0
  Jheadstart: 11.1.2.1.28
  
  Hello
  I sent a unit test to [email protected]
  in the pop - up JHS lov window when I delete a file and then, I want to create a new record, it's not working
  but when I click in a field and then click the more icon, it works correctly

  OK, this happens because the code that sets the question to delete that I sent you before. This code must be modified slightly, the following lines:

  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));

  should be closed with a check, if there is a selected line:

  If (selectedRowData! = null)
  {
  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));
  }

  Steven Davelaar,
  JHeadstart team.

• Major problem when the video is paused at the PPCC

  Suddenly, this is what my screen looks like when I hit pause on any kind of video. It's nothing to do with the original files, because they play in other players. Anyone else seeing this?

  

  Hi Steve,.

  Please see this FAQ: FAQ: Why am I getting yellow and red lines running through my images on pause?

  Thank you

  Kevin

• site look at a problem on the iphone with ios operating system

  on Android phones, the site shows very well, but on iphones, it does not work.  site: tdpedmond.com

  This is how it manifests itself.  ideas for a fix?

  

  Your site is at http://mobileautocardetailinginteriorpaintcoatingedmondok.com and you will find that the URL works fine.

  Rather than actually add the URL tdpedmond.com to the new site, that it is implemented as it is a site to a page in the tdpedmond.com with a single image in and your true site are forced to appear within this framework. That won't work because it prevents the site to be able to detect the device, it runs on, and it will not interfere with other behaviors of your site.

  You must add the new domain to your real site by updating the name domain registration of your domain name servers. You will need to work with them or your hosting provider if you are not familiar with how to do this.