Security group create a problem at the EBS UM provisioning

Similar Questions

• Change security groups are allowed access to the project

  Hello

  We have a project of the Disqualification in our production environment that allows only administrators to view/access it. We now allow access of data analysts. I know that we could just edit the prod Manager access security group, but due to some storage issues related to the postgres DB that uses a Disqualification, we clearly downwards and the redeployment of the Disqualification (and the project) on the prod server every two weeks. This means having to manually modify access groups after each reinstall. To save the duty of our many stop to promote a new project dxi file, is there something that can be added to all config files to allow data analysts access the project? Editing a config in our backup file would be very fast and simple.

  See you soon

  Jon

  Unfortunately, no, no.

  I can't imagine a scenario that would require the Disqualification to redeploy completely. If there is a problem of PostgreSQL, the worst case would be a fall and recreate the Pb of results, I would have thought.

• iOS 9.2 creating MAJOR problems on the iphone 5 s

  I've just updated the 9.2. NOW, my home button does not work very often. Also, battery very fast 100% to 0% within 12 hours - even in standby.

  Tried the reset and everything, but the "home" button isn't always for this.  All solutions? Starting to feel a little cheated by Apple here, given that I paid more than $400 for my phone.

  Sounds like you have a blocked process which is causing the battery drain. Given to zero and all that. What is all this. Until someone takes the time to solve this problem, it would be good to know exactly what you were doing. User troubleshooting steps are restarting, reset, restore from backup, restore to factory. Test after each step. If you restore factory and test with no additional content and still a problem, then make an appointment at the Genius Bar at the Apple Store nearest to have the material examined, since this would mean that it would be something wrong there.

• Create record problem in the JHS LOV popup after deleting record

  JDeveloper: Studio Edition Version 11.1.2.2.0
  Jheadstart: 11.1.2.1.28
  
  Hello
  I sent a unit test to [email protected]
  in the pop - up JHS lov window when I delete a file and then, I want to create a new record, it's not working
  but when I click in a field and then click the more icon, it works correctly

  OK, this happens because the code that sets the question to delete that I sent you before. This code must be modified slightly, the following lines:

  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));

  should be closed with a check, if there is a selected line:

  If (selectedRowData! = null)
  {
  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));
  }

  Steven Davelaar,
  JHeadstart team.

• Add vNIC PortGroup scope with the REST API security group

  I created a security group within the reach of a PortGroup via the REST API. Now, I'm trying to add a vNIC, also via the REST API.

  To help illustrate, I have a JMTest1 VM with 1 vNIC connected to the PortGroup which is the scope of the security group. When I change this group the first item in the list that could be added to the security group is the first (and only) JMTest1 vNIC.

  

  To add it via the REST API, I need to provide the following:

  https://192.168.x.x/API/2.0/services/SecurityGroup/SecurityGroup-XX/members/ < member-moref >

  for example I need to understand what the < member-moref > for the vNIC to JMTest1 and this is what I have a problem with.

  If I add the vNIC through the user interface and then interrogate the security group it gives me below the answer:

  < securitygroup >

  < objectIdobjectId > securitygroup-xx < / objectId >

  < type >

  < typeName > SecurityGroup < / typeName >

  < / type >

  < name > JMTest7 < / name >

  < description / >

  < revision > 9 < / revision >

  < objectTypeName > SecurityGroup < / objectTypeName >

  < scope >

  < id > dvportgroup-xxxxx / < ID >

  < objectTypeName > DistributedVirtualPortgroup < / objectTypeName >

  < name > dv-xxxxx < / name >

  < / scope >

  < extendedAttributes / >

  < inheritanceAllowed > false < / inheritanceAllowed >

  < member >

  500758f6-b97b - 7A 79 - 0c < objectId > 04 - 996f53edf3f0.000 < / objectId >

  < type >

  Vnic < typeName > < / typeName >

  < / type >

  < name > JMTest1 - NIC 1 < / name >

  < revision > 6 < / revision >

  < objectTypeName > Vnic < / objectTypeName >

  < scope >

  < id > vm-xxxxx / < ID >

  < objectTypeName > VirtualMachine < / objectTypeName >

  < name > JMTest1 < / name >

  < / scope >

  < extendedAttributes / >

  < / member >

  < / securitygroup >

  It seems that the < member-moref > for the JMTest1 vNIC is < objectId > 500758f6-b97b - a 7, 79 - 0c 04 - 996f53edf3f0.000 < / objectId >

  If I run now:

  https://192.168.x.x/API/2.0/services/SecurityGroup/SecurityGroup-XX/members/500758f6-b97b-7a79-0c04-996f53edf3f0.000

  then the vNIC is successfully added to the security group. (yay!) So I am now left with the task of how to get

  500758f6-b97b - 7A 79 - 0c < objectId > 04 - 996f53edf3f0.000 < / objectId >

  of a vNIC?

  I have looked at the object in the Mob vCenter and via PowerCLI, but cannot see how to derive from it.

  Anyone know the answer to that?

  The uuid vnic is created by concatenating the vm instanceUuid + '. ' + the last three digits of the vnic device key.  (The vnic is located in the area of the config.hardware.device of the virtual machine and the key will be to shape 4xxx, where xxx represents the 3 numbers you need).

• How to add the AD security group in each virtual machine with a name corresponding in VCenter?

  Hi all

  I would like to know if it is possible with VMware PowerCLI v4.1, I created the universal security group called 'Local administrators on %ComputerName%' for each server I have in UO computers by location OR separate and that he manually add members of the Local, but I want to attribute this security group in each computer virtual with the same name if possible.

  Basically, it's something like this:

  In the ad, here are computer objects:
  DOMAIN.com/Computers/ mailserver1-VM
  DOMAIN.com/Computers/ DBServer1-VM
  DOMAIN.com/Computers/ ApplicationServer1-VM

  In the ad's local security group objects:
  DOMAIN.com/SecureProductionOU/ 'Administrator locally on mailserver1-VM'
  DOMAIN.com/SecureProductionOU/ 'Local on DBServer1-VM administrator.
  DOMAIN.com/SecureProductionOU/ 'Local on ApplicationServer1-VM administrator.

  So I want to affect these security group in each respective name of VMS in VCenter:

  VCenter01.domain.com
  Datacenter1
  HighPerformanceCluster1
  Mailserver1-VM - Local Administrator on mailserver1-VM - role: read-only
  DBServer1-VM - Local Administrator on DBServer1-VM - role: read-only
  ApplicationServer1-VM - Local Administrator on ApplicationServer1-VM - role: read-only

  Any kind of aid and assistance would be appreciated grgeatly.

  Thank you.

  Hi Albert,

  I don't know what you want to check exactly, so I give 2 possible solutions.

  (1) you have a fixed number of names known to virtual machines for which you want to add this permission.

  $targetVM = "MailServer1-VM","DBServer1-VM","ApplicationServer1-VM"
  
  Get-Cluster -Name HighPerformanceCluster1 | Get-VM | `    where {$targetVM -contains $_.Name} | %{    New-VIPermission -Entity $_ -Principal ("DOMAIN\Local Administrator on " + $_.Name) `       -Role (Get-VIRole -Name ReadOnly) -Confirm:$false   }
  

  (2) you want to check for each virtual computer if the security group exist and then add the authorization.

  Get-Cluster -Name HighPerformanceCluster1 | Get-VM | `    Where{Get-QADObject ("DOMAIN\Local Administrator on " + $_.Name) `        -DontUseDefaultIncludedProperties -WarningAction SilentlyContinue `        -ErrorAction SilentlyContinue -SizeLimit 1} | %{    New-VIPermission -Entity $_ -Principal ("DOMAIN\Local Administrator on " + $_.Name) `        -Role (Get-VIRole -Name ReadOnly) -Confirm:$false} 
  

  Note that this requires the Quest AD snap-in must be installed. If you have a version without the Quest AD snap let me know.

• Printer HP C509a range: new/still a problem with the C309a with wireless printing

  Printer is now, do not print, then all the sudden days later, it will print what was in the reference. I checked everything I know how to check. I think to unstalling the software, but when you do that... There is ALWAYS something that lingers to create a problem during the installation again. Is there a good way to get rid of the computer of all the files that relate to the printer?

  OK, here's where I am. Computers 3 1 HP printer. I removed the HP software. Reinsall after I did the "usbready.exe" file in order to load the software.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/C309a-software-will-not-install/m-p/5476271#M79658

  FYI

  1 computer is wired 150 ft. - works fine. The other 1 computer (wireless router) to the point of HP printer

  works very well. It is the 3rd computer wireless to the router but does not work. The software, see TI but not install and plug. In one of 3 different choices. Now, I got a little my limits. I'll try to go in the "devices and printers" see on adding a printer and see if that can cling to the top. He is a friend and 24 far mi but needs to be done. The choice of HP software is the USB connection, Ethernet connection and wireless connection. All 3 see the printer but do not begin upward.

  Get it!... see red

• If there is a problem with the temperature of my system if I update to Windows 7 Professional 32 bit in HP Pavilion dv6330ea laptop?

  Hello

  Model No. - HP Pavilion dv6330ea laptop. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&d

  I bought my laptop in UK and I intend to improve my system Vista Home Premium 32-bit to Windows 7 Professional 32-bit.

  In some forum users have mentioned that.

  Users with nVidia graphics card should check the temperature of this device before upgrade.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  Q1] what is the minimum temperature / best should have the CPU and GPU, motherboard, HARD drive?

  Q2] is that this temperature is sufficient to upgrade to Windows 7? It will create no problems after the upgrade to Windows 7? This is the value of the temperature of my system of CPUID Hardware Monitor v1.22

  Motherboard - Quanta 30BC

  Temperatures - THR1

  Value - 46C (114 F)

  Min - 46C (114 F)

  Max - 62 (143 F)

  Inter Core Duo T2350

  Temperatures - Core 0

  Value - 41 c (105 F)

  Min - 41 c (105 F)

  Max - 64 c (147 F)

  Temperatures - Core 1

  Value - 41 c (105 F)

  Min - 41 c (105 F)

  Max - 64 c (147 F)

  Hard drive - ST9250315AS

  Temperatures - Assembly

  Value - 48 c (118 F)

  Min - 48 c (118 F)

  Max - 49 C (120 ° F)

  Temperatures - Air flow

  Value - 48 c (118 F)

  Min - 48 c (118 F)

  Max - 49 C (120 ° F)

  Please answer that will help me to decide whether to proceed with the upgrade to Windows 7 Professional or not of the HP Pavilion dv6330ea notebook PC

  I found a solution to my own post...

  Finally installed Windows 7 and noticed that the temperature is low compared to vista.
  So would like to inform all users with queries concerning questions of temperature on PC portable Hp Pavilion dv6330ea proceed with the installation of windows 7 and temperature is very low, the startup is fast, ahead of the functions that is good in windows 7 over vista.

• Another application on the ebs r12 database

  Hello

  I would like to know if I can create another user on the ebs r12 database.

  That's another application (not ebs).

  What are the risks?

  Is there an id doc on this subject?

  Thank you.

  
  

  It may not be available for that Oracle doc. But as a principle, why the unrelated database schema is created in the EBS database. This will add more load on the database of EBS, administrative effort. Let's say that your EBS database is down for maintenance, while the other application accessing this scheme does not require maintenance always, it will be down.

  concerning

  Pravin

• Built-in security groups

  I know that coldfusion is capable of grasping the domain\username of a user, but there is nothing as simple as pulling on a security group that is associated with the user so would there be?

  Sorry, you must do this yourself.

  But it's usually not too hard with the tag driven by the field of cgi.auth_user.

• Create a member of the group security on a dimension on Hyperion.

  Hi all

  I need to restrict my security on each dimension member that I use.

  To do this, I created a group on the Shared Services Console Hyperion with the members of the other user. After research by and it returns me the group without any problem.

  Then I return to Hyperion, go to Dimension, select my Dimension, select the Member and click on assign access groups tab--> Add, and then when I start looking for the name of the group, I signed up earlier, it does not appear.

  Can someone explain to me why this phenomenon occurs?

  I found my solution. Some of the groups previously had two users. Each of them are assigned in another group of groups that have defined provisioning before (have some selected roles on that).

  Then, when I created my groups, I had to add them to the assigned group.

  In this way, I need not to the provision of each group, that I created. It's structural and faster than do all the work for all of them.

• Creating dependent list on the security group.

  Hello
  
  I want to create a list that is dependent on the security group, I created a custom table, relationship and the security group and my custom table view.
  I don't get a dependent list it should be dependent on security group.
  Please help me.

  See my post Re: how to change the values of the custom profiles based on the security group?

• Creating security group with grants decided in active directory - Server 2003

  Hello

  I need to create several different security groups for about 7 users with grant different access rights, but all users will access the same folder main and some of the same void records. I created a group with some of the users but appear to have access to all the folders there particular subfolder but I only want to have access to some of the folders in the selected subfolder.

  I guess what I'm asking is how do I create groups of different security with grants decided for each groups and ensuring that users in these groups only have access and subsidies to certain folders.

  I don't know if I explained myself properly but I certainly confused myself, I hope someone can point me in the right direction to solve this problem.

  Thanks in advance

  Jah

  Jah,

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
  
  Thank you.

• Political group customer service couldn't start - how to solve this problem? The latest in a series of problems.

  For completeness, I'll give the full story here. We have a computer that is running Windows Vista Edition Home Premium. The other morning, following an update of Windows and reboot, when the user tried to connect it receives the message "user profile Service service has no logon. User profile cannot be loaded.

  We took the advice online to log in with an administrator account and change the parameter of the register for the profile, reseting certain values to 0. We have also followed the instructions to remove the ntuser.dat file. However, we have not find a file that was just ntuser.dat. They also had the long series of numbers after them, apparently, which indicates that they are temporary files.

  After several attempts to fix it, she now gets a different error when it tries to connect: "customer service group strategy was able to start.

  It can log on to the account in safe mode, and I can connect on his computer using his account from my computer on the same home network with no problems.

  We tried to copy the directory of the user to a new profile, except for the ntuser.dat file, as suggested by using Windows. It took a good 5-6 hours to copy, and the new profile seems to be heavily watered. None of its setting have been postponed, webshots will not run, Firefox keeps asking if she wants to set as the default browser even after she told him Yes every time, and it cannot access the settings of user accounts in the new profile. Its almost as if he's really the administrator permissions, even if the accounts and users control panel shows it does.

  We know that two other things were when the Windows update that caused the recovery occurred; iTunes was a large download, and Symantec is running a regular security sweep. Safety analysis showed that continuing execution, but was no progress. After consulting a few forums of Symantec, we managed to cancel the process and uninstall Symantec, which may be the only way to stop the analysis. Apparently active Symantec scans are known to cause errors in the connection profile. However, this has not fixed the problem.

  When connect us to access in safe mode and look at the advanced user account settings, profiles include two profiles with his original user name. Basic user accounts list shows only one. I have no idea what it means.

  His profile has now ntuser.dat file. However, we cannot copy or delete it - its used by the system. We can also restore a previous version of the file ntuser.dat - apparently it isn't getting saved in archive (probably for the same reason, we cannot delete or copy).

  We tried to do a restore of the system since the start of the day. It was while he was still the "user profile service failed", but before the "political group customer service could not start.

  We have done sfc/scannow. He said that some files were corrupt, but he could not fix them. I couldn't understand what files it thought were corrupt.

  The Client Services group does not run when I see him the original profile in Mode safe. However, I don't know if it's supposed to be running in Mode safe or not. There is no way to start; to start or stop options are shaded out and unselectable. The Group Services Client IS running when I check with a different profile on the system.

  Would appreciate a fix for this, or at least a way to create a new profile that covers all sound settings and didn't result in a complete disaster.

  I think we have this resolved. Unfortunately, there was some steps as long as I'm not sure which were needed. It includes:

  * The instructions here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/user-profile-service-service-failed-the-logon-user/4ed66b21-c23e-42f1-98b2-706dcf931fae

  (change of some registry entries for the profile)

  Uninstall of Symantec, which had an automatic scan which had been interrupted and was stuck not being able to complete or be cancelled.

  * The final bit of trouble who worked was (hope I get this right):
  (1) delete the registry as indicated above.
  (2) rename the profile folder.
  (3) restart the computer and let it create a new profile folder with the same name.
  (4) copy the files newly created to the old profile profile's ntuser.
  (5) by removing the new profile and rename the old profile back.

  And now things seem to be working, if she had to re-run Setup on some programs.

• Has anyone created new security groups... and how did you do

  We have problems with giving people the opportunity to view and modify other emails/forms/etc.   Anyone who sets up security to pull away, specifically, groups the possibility to remove or modify?  Not everyone who uses our system needs to change or remove, so I wasn't sure if someone had created security groups that pulls this ability of some specific users...

  Thank you!

  When I told our CSM, she said you have to contact support and they can do it on a case-by-case basis.  But we seek to implement the same thing, it would be interesting if you managed to get this Setup.