IOS CA command does not

Similar Questions

• 6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes

  6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes cannot allow him. (When I get to start the Iphone by pluging it to Itunes)

  I've done a new install and reset the network settings.

  But always the same questions

  Thanks a lot for your help

  I have the same questions and more from Friday December 11 when I've upgraded to iOS 9.2.

  Device: iPhone 5 s

  Problems:

  -Screen freezes randomly reboot * required (sometimes restart by the camera itself)

  -Sometimes device reacts very slowly on the command (or even then restarts)

  -For the most part within the first hour when used, sometimes immediately (after restart)

  -Cannot slide or apps to react when I touch

  -AssitiveTouch on, keep available however to move and opening, but no order accepted when the screen is in gel

  Resolution of problems so far:

  -Reset all settings (no result)

  -Backup on iTunes (11 dec)

  -Erase content and settings and restore the backup to iCloud (10 Dec *) (no result)

  -Erase content and settings and restore the backup of iTunes (11 dec) (no result)

  -Tried with the new iPhone camera 6 and restore backup icloud (unsuccessfully; restore hangs at "1 minute remaining")

  -Tried with the new iPhone camera 6 and restore backup of iTunes (no result: same freezing questions reappear)

  Conclusion date: is not a hardware problem (device), but one software: combination of the configuration (such as backup) and the new iOS 9.2.

  By the way: I guess that not possible to restore 9.1 on the device.

  The new iPhone 6 initially contained iOS 9.1, but then did not 'see' backups, because they were made from a 9.2 iOS device.

  So I had to first install the iPhone 6 as a new iPhone, upgrade to iOS 9.2 and then I was able to reset and restore the backup (with no good result, as described above).

  *) restarts: hold Home-button on/off-button simultaneously for 10 seconds

  backup *) in the form of clouds 10 Dec worked without problem on iOS 9.1.

  I will continue to investigate on removing the apps installed a year or two, see if that generates the result.

• UC520 # squeeze flash: command does not exist - need help

  Hi all
  I am having trouble with a UC520. After the update, removal and the phoneloads to the flash Uploader: memory, it is almost full. (But there should be more space available).
  When I use the command display flash: or dir/all/recursive flash: the UC500 told me there are 4.505.600 bytes available (123.678.720 bytes used) my card flash 128 Mr. but when I the sum of simple files file sizes it is only 64.543.836 bytes so it must at least be free 60Mbytes.
  After some research, I think that the problem is that the flash is fragmented or files where not propperly / entirely deleted.
  To resolve this problem Cisco offers the command squeeze . But this command does not exist on the CPU. How to solve this problem, do you have any suggestions?
  -Patrick

  Wow. I have no idea this is.

  I guess you can back them up and get down them. Maybe after some research on orphans' on flash iOS.

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• My new iPhone iOS 9.1 does not appear on my iMac screen 10.6.8.  I don't want to upgrade to El Capitan.  Is there a solution?

  My new iPhone iOS 9.1 does not appear on my iMac screen 10.6.8.  I don't want to Snow Leopard upgrade to El Capitan.  Any suggestions?

  CarbonCopyClone on an external drive in an external enclosure.  Upgrade than SL ElCapitan leaving the intact internal SL.  Start externally using the option key pressed at the start, do what you need with the iPhone, then stop and do what ever you need to again with SL disc.

  Cludgy, but it works.  I keep my SL still functional because there iDVD, but use updated OSXs for other purposes.

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely

• Update iOS yesterday again does not help Revel update.

  Yesterdays iOS update still does not help the revel update. Hoped Apple update would fix the path of Revel, but not so much.

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Thank you! Who took care of her!

• I upgraded to ois9.3.3 and now my voice command does not work

  Yesterday, I did the upgrade of the ois 9.3.3 and since my voice command will not work.  I searched the internet for advice on how to fix but nothing that they suggest work.  How can I get rid of this upgrade and go back to what I had which works or solve this problem.  I need voice control for I can be hands-free while driving.

  Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo come back? You won't lose data by doing this, but he cn cure some problems after installing new software or applications.

  Have you tried to downgrade from iOS?

• After updating IOS 10 wifi does not work on my iphone anymmore 6

  IPhone 6 c

  IOS 10

  after update Wifi makes connections but wifi symbol disappears immediately after the connection.

  functions of the iPad without problems. Reset hardware doent change the problem.

  What could be the problem.

  You must first check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.

  Make sure that Wi - Fi and you can see your network

  Go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.

  Restart your iPhone/iPad, router, cable/DSL mode

  If this does not help, reset your network

  On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.

  These measures should help.

• IOS 10 reminders does not work correctly.

  When a reminder appears in the lock screen, you used to be able to slide on to recognize.  Now, you must go the extra step to see first. Then he may or may not give you the option recognize, set a reminder. If she can't give you options to recognize, it does not at all.  I can push any button but nothing happens.

  And it's all or nothing if the reminder will be displayed on the phone at all!  I see the recall on my mac and my watch but not my phone! Something is not right!

  This should be supported for a right to 10 iOS App, but it is not allowing me to select this community! AGH!

  I'm having the same problem with reminders that often does not on my iPhone (with iOS 10) at all, even if they were created on my iPhone and find that they do not appear on my Mac!   What a mess!

• iOS iphone 10 does not connect to the DHCP wifi

  Updated IPhone 6 to 10 of IOS, and now the phone will not connect to my BT Home Hub 5.  All other devices will still be another phone that has 10 IOS.

  The phone recognizes the router password, puts a blue check mark against the connection, but no wifi signal appears and remains on 3G / 4G.

  If I look at the DHCP information on the phone, it's all white is wrong.

  I checked on the router and the phone does not display as connected.

  I have reset the router etc.

  I reset the network connections on the phone, more hard recharge etc.

  I am at a loss, please help!

  Can you connect to other Wi - Fi networks outside your House?

  If not, to exclude a software problem, set back to settings factory, without using the last backup. Set up the coordinates manually, and then test the Wi - Fi connectivity.

  Use iTunes to restore your device to factory settings - Support Apple iOS

• iOS 10 taps does not

  After installing 10.0.1 on my 6s iPhone iOS, I noticed that I have to type my * screen several times on each action for my tap is taken into account.

  Is anyone else having the same problem?

  Same problem here with the IOS 10.0.1 on Iphone 6 more.

  Also, sometimes the screen does not at all, I have to press the power button and then press the home button again.

  Rare, but it's there, "virtual taps" if poster, he opens the first application of the top-left, by himself. Then it closes. Then it opens again. This does not stop until I hit the power button to turn the phone on standby and then struck a second time to wake up.

  I don't have any of these problems on 9.3.5. What is Apple?

• 10 iPhone update iOS 6 - phone does not

  Hi all

  I downloaded the update iOS yesterday (on the phone). The phone has been restarted several times and showing some strange screens (black on top and Red bottom split 30/70). I left the phone at night, connected to a charger this morning because it was showing only the apple (on white background) logo.

  I tried to turn it on and now it is completely dead, does not (black screen).

  No idea what I can do now. I intend to go to the Apple store later today I hope that they will be able to solve the problem.

  The phone is out of warranty now (iPhone 6) should I worry about this, after all, this is the update just went horribly wrong?

  you have a computer running iTunes if yes plug it into this and perhaps save and restore