iOS Splashscreens. Mandatory? Should I have the plugin?

Similar Questions

• I try to use my school online applications using citrix. I have the plugin installed on my machine, but it does not open firefox 4 beta 11. He will be in the future support?

  I have the plugin from citrix installed on my machine and it runs and starts well in firefox 3.16. Can I find support for it now or should I wait the final Firefox 4?

  Compatibility with Firefox 4.0 is the responsibility of Citrix. You can check their website for a plugin for Firefox 4.0beta update versions. There again, perhaps they expect the actual release of the Firefox 4.0 before they update their plugin. many programs do not support versions beta from other programs.

• Just bought a flash drive. When I plug in the USB, nothing happens. Should I have the software?

  How to use a flash drive.  Should I have the software?

  How to use a flash drive.  Should I have the software?

  Normally, flashdrivers are plug-and-play. no need to install any additional drivers or software

  Connect a different flash for the same pc driver and check if it works? If it works and as your first one does not work, connect the first condition in another pc audit... If it still not detected that you may need to contact the seller

  If none of your flashdrivers are detected by your pc try below repairs while the flashdriver is plugged

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  http://support.Microsoft.com/kb/817900

• All of a sudden I can't play games or watch videos "we have detected that you do not have the plugin required to load the game.

  Original title: suddenly I can not play games or watch videos

  I have Windows 7. Until a week ago, I could play games online and watch videos. So, when I tried to play a game, I get the message: 'We have detected that you do not have the plugin required to load the game' with a button that says 'Get Adobe Flash Player '. I install Macromedia Flash Player, but keep getting the same message. I've checked everything I can think of. Would appreciate help.

  Hi Cindy,.

  1. what browser you use on the computer?

  2 has there been any changes made on the computer before the show?

  Method 1:

  If you try to play videos online and using Internet Explorer, I suggest you to see link and check if it helps:

  The video problems with Internet Explorer

  Method 2:

  I suggest you to refer to the article and see if it helps:

  The problems of games online using Internet Explorer

  Method 3:

  If the problem is not resolved, I suggest to uninstall the flash player and re - install:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Adobe Flash Player

  http://get.Adobe.com/flashplayer/

  Let us know if it helps.

• In "Photography - individual - plan" of Photoshop CC (€19 / MO), should I have the full version of Photoshop as the course Photoshop CS6?

  Hello

  In "Photography - individual - plan" of Photoshop CC (€19 / MO), should I have the full version of Photoshop as the course Photoshop CS6?

  Yes, you are right. It includes Photoshop CC 2014, CC and CS 6 versions.

• How to have the plugins of the language of the parameters to the language of the system's default system locale?

  I have an English Windows system with English as the language of the system. All of my software, including Firefox are in English. However, I have the settings the Russian value default system locale. This has no effect on the UI program, but in Firefox, it changes the language for all plugins. How can I stop this? I just want everything in English. I found everything about this topic: config.

  Oh, sorry, it seems that the problem is due to the extension of pencil. Disable all spent in English. He just happened to be one of the first I ever installed.

  I'll go the penalty instead of its developers. Thank you for your time.

• Should I have the original keyboard for the factory system recovery settings

  HP Omini 220-1180qd desktop

  Win 7 64 bit

  My all-in-one PC has sent repair HP because the new second hard drive has failed. When he returns, should I the original keyboard to launch upward with the new system?

  I have a wireless Logitech MK300 who is older and I am away from home where the original HP keyboard. I appreciate your help and won't cause a problem with the new configuration.

  I suggest using the regardless of the type of initial connection

  PS2 or usb

  but should strive to put in place that long, the device can detect your keyboard

• Satellite X 200-219 - should I have the PCI memory controller

  As a newbe please excuse my question has been answered before. I tried to find the answer.

  I've updated from Vista Home Premium to Windows 7. Everything seems to be fine except that I still says the memory controller PCI does not install correctly. Toshiba support no more than my machine.

  As the laptop seems to do everything that I need, I need this thing or can I just forget about it? If I need so where can I find a compatible version?

  Thanks in adance for any help.

  As I see your old Satellite is not supported for Win7, so if you can live without it go to Device Manager and disable this piece of hardware.

  Use you the 32 or 64 bit Win7?
  What drivers you have installed so far?

• Should I have the 4 GHz iMac 5 k or is 3.3 GHz fast enough?

  I currently use a MacBook Pro, but you are looking to upgrade to the iMac 5 k this weekend. I'll update the ram but I'm not sure to know if I need to upgrade the processor to 4.0 GHz I used my MacBook for djing (serato) and Photoshop software and Logic Pro x. Is fairly fast 3.3 GHz or should I expect at the mercy of 4 GHz.

  I would like to get 4 GHz for advanced as Photoshop software and dj image editors.

• should I have the product key to upgrade xp to vista

  My wife son died and she got her computer but no cd has no product key for xp install.do, I need a upgrade product key to custom computer Vista.the built.don't where he is a few years old. Thank you

  Just create an Image backup of XP (before you upgrade) on an external USB drive. Then, whenever you may need to reinstall just Vista restore XP using the Image backup.

  (I think you'll find that Windows 7 is a better choice then Vista in the transition from XP to a newer version of Windows).

  Also if it built the computer then you will find the product key using a key finder utility. Download and run one of the utilities listed below.

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  Displays your Windows XP, Vista or Windows 7 key.
  However may not detect a key to office, then try one of the other two listed below for office key).

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  One final note: after you upgrade to Vista or Windows 7, you will have to install the device drivers. Go to the web site support motherboard manufactures, locate the correct mother by part number, download the appropriate drivers for Vista or Windows 7 to a folder, copy it to a USB flash /thumb. Then install after the upgrade.

  J W Stuart: http://www.pagestart.com

• Should I have the .NET Framework 2.0 and 3.0 on my computer?

  I HAVE MICROSOFT NET FRAMEWORK2.0 SERVICE PAK AND A 3.0 PAK SERVICE DO I NEED BOTH

  Yes. The latest version of .NET Framework does not include earlier versions.

• Should I have the new firmware on my router WRT16N?

  I'm trying to install a HP Photosmart 7515 eAll-in-one printer.  OK works in "captive" USB mode, as a single computer printer only.  It will not install as a wi - fi device, likely reason being my router (wireless) settings, according to the sheet of the printer wireless network Test results.  I suspect that the firmware on this subject (3.0.02) is obsolete.  What is the latest version of the firmware for the WRT160N?  And if this isn't the problem, is there any suggestions on how I should proceed, so that the printer can be used to its maximum capacity?

  Thank you, ScarletJamie.  At least this part of my router issue is resolved.

• How to scan a document or photo to my all-in-one for my laptop. should I have the scanner software

  I tried scanning of photos of my all-in-one for my Samsung laptop without success. I need to download the scanner software?

  JoanRoger wrote: Scanner is inkjet HP 2060 advantage all-in-one K110 series. Laptop is the Samsung RV510 64 bit thanks

  Hello JoanRoger, here is the link for the package full feature software/driver for your printer All In One of 2060.

  I download and install this software. Do not turn on the printer or connect the USB cable before advised to do so during the installation process.

  Just to go to the linked page and the section Details and specifications, search for the DJ2060_K110_231.exe and click on the filename to download the file.

  This should allow the correct use of the printer All In One 2060 connected to your laptop.

• Should I have the administrator account to run the batch file?

  When I log in as administrator, I run after the file of commands without any problem, but

  When I login as a user, I can't run after the batch file, the changeover of the authority.

  I would like to know if I need to log in as an administrator to run this batch file or not,

  Can I use different accounts group? and always perform this task.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions :>

  off @echo
  echo copy C: d:

  RoboCopy C:\ /MIR R:1 /W:1 D:\
  ECHO done

  Hello
   
  To respond to your request, you must enter the administrator password to access this command file.
  Instructions for Windows 7
  In order to run as administrator, create a shortcut to the batch file.
  1. right click on the batch file, then click on copy
  2. navigate to the location where you the shortcut
  3. right click on the background of the directory
  4. select Paste shortcut
   
  Then, you can set the shortcut to run as Administrator:
  1. right click on the shortcut
  2. Select Properties
  3. in the shortcut tab, click Advanced
  4. check the box "Run as Administrator"
  5. click on OK, OK
  Now when you double-click the shortcut it will ask for confirmation UAC and then run as an administrator (which as I said above is different than running under an account in the administrator group)
   
  I hope this helps.

• Should I have the Network Access Protection Agent Service to start automatically on Windows 8?

  Hello!

  While I was looking for a completely different setting in Control Panel in Windows 8, I came across the center of the Action settings and noticed that the Agent of network access Protection service is not running. I open the computer management snap-in and noticed that the service is configured by default must be started manually. I looked for more information on the internet but I wasn't able to find a detailed explanation about his goal for a personal computer. The only explanation I found applied only to Windows Server.

  Is it really necessary to configure this service to start automatically on a home network, or can it be just left set to start manually? What is its use on Windows 8? Is this just in case the computer needs to access a network of business domain?

  I am running Windows 8 Pro 64-bit edition on an Acer Aspire 5552-5898 connected most of the time in my network domestic, although usually I connect to public networks. My computer is not configured to connect to a domain on a corporate network, not even using VPN. When I access my e-mail from this computer company account, I first need to authenticate with a code provided by RSA device before I can connect to Outlook (OWA).

  See you soon!

  Carlos

  Hi Cspork,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  As I understand it, in the center of the Action the officer of Access Protection settings network service does not work.

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer.

  The service can be left to be set to start manually.

  It is especially where the computer needs to access a network of business domain.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.