IP address changes each time the router loses power or is reset (Photosmart C7280 printer)

Similar Questions

• ASUS laptop computer only connects if I'm sitting next to the router loses power after a few feet

  1. ASUS laptop computer only connects if I'm sitting next to the router loses power after a few feet
  2. new laptop
     

  I have the same problem with this ASUS Ultrabook. New brand ASUS but in two different houses and I have the same problems. Get right next to the router and it connects ok. Get a few feet away from the router and the ASUS gets angry and does not connect. Downloaded the latest driver, but that did not help either. Obviously, this is a faulty piece of equipment in the laptop. Great joy!

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• How to make a web page which changes each time the user refreshes? Is it possible to Muse?

  Hi, I would like to make a simple site where the main text in the center of the page changes whenever the user refreshes the page in their browser. I guess I'll have to do a master and several pages that are all the same except for changes in the text, but I don't know how to make sure each update goes to another page and not just the home page? Is it still possible in the Muse?

  This is an example of what I'm going: : procatinator:

  Thank you!

  You can't do it with only Muse. Would be probably pretty simple to do with a bit of Javascript. Check the widget directory such that it is possible that someone has made a widget for random content. If not, maybe I'll do one this weekend. ;-)

• My stored user names and passwords are removed several times each time the computer restarts. ______

  My "XP Home Edition' Service Pack 3 > stored user names and passwords are removed several times each time the computer restarts.

  Please check the LINK for the process that I'm going through, but nothing helped.

  http://www.box.NET/shared/zcokjesxx3

  Thank you for your kind cooperation.

  Sincerely,
  Frank

  Hi Ajay,

  It worked!

  Was the only thing that I changed, I added a % USERPROFILE % so he looked like that before

  %USERPROFILE%\Application data

  Instead of like this USERPROFILE%\Application Data

  Not sure if this was necessary to make - but again - it WORKED...

  Thank you very much for your time and your help is to solve this for me.

  Sincerely,

  Frank

• Why my calendar and time changes each time I have logoff my computer

  Original title: Date/time

  Why my calendar and time changes each time I have logoff my computer? Sometimes, it will change a year totally false and an incorrect time?

  It could be the button for the CMOS battery.

  A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.

  It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.

  Generally, the battery is a watch battery "CR2032", about the size of a nickel.

• Should I change ip of the router if I use the vpn - RV110W

  Hello:

  My RV110W ip address is 192.168.1.2. Now, I add a line to vpn clinet adjustment table. When I put the button Save page displays "to ensure the functionality.the good router need to change its ip address to 10.x.x.1. So. I need to know should I change ip of the router 10.x.x.1 order to use the VPN? It is very embarrassing because my devices are all set to the range of 192.168.1.x.

  Hello

  I'm sorry that you're having problems with your device.

  You are right, the router will force you to change the IP address when you try to date a new VPN user, if he always uses the IP address 192.168.1.X, in order to avoid problems when people connect remotely like this subnet is the most used, and if someone tries to connect remotely by using the 192.168.1.X subnet, then the connection will be rejected.

  Now, you don't really have to change if you don't want (I have no advice as the function is there for a reason and most likely you will have problems with the connection of users on the same subnet).

  What you can do is change the IP address that you want, create all VPN users and then change the IP address to you, this way you fool the router and you can keep your current IP address (even once, this is not recommended)

  I hope that was helpful, please let us know help.

• Date and time resets each time the computer restarts, or stops.

  Date and time resets each time the computer restarts, or stops.

  Date and time resets each time the computer restarts, or stops.

  Re-define at what time?

  If you back up battery is faulty, and when you shut down the computer, the machine doesn't have enough 'juice' to operate. Thus, when you restart it, time will show either bad timing or outright from the date it was setup to the factory.

  TME to check or replace the battery.

  t-4-2

• How to reset a timer each time the function is called?

  Hello

  I have my code like below. The main function is called whenever the event occurs. The event occurs when I created a timer which occupies 10 seconds for display purposes.

  Once the Main() is called, a message appears and after 10 seconds, the message disappears.

  The problem I had met with this code is that the message does not last for 10 seconds when the Main() is called consecutively. For example; when its name for the second time within 10 seconds, the display will show for 6 seconds and maintain the reduction.

  Can someone help me with this problem and tell me what to do to reset the timer each time the Main() is called. I also used FeatureState_Timer.reset (), but it did not work.

  / * Declarations of global variables * /.

  public var FeatureState_Timer : timer = new Timer (10000);

  / * Global function * /.

  function Feature_Timer_Function(timerEvent:TimerEvent): void

  {

  Message.Visible = false;

  Feature_Timer. stop();

  }

  function Main(event:Event):void

  {

  FeatureState_Timer .addEventListener (TimerEvent.TIMER, Feature_Timer_Function);

  FeatureState_Timer . Start();

  Message.Visible = true;

  }

  Thank you!!

  Try to reset the timer first:

  function Main(event:Event):void

  {

  FeatureState_Timer . Reset();

  FeatureState_Timer.start ();

  Message.Visible = true;

  }

  If this does not work, use the following code:

  function Main(event:Event):void

  {

  FeatureState_Timer = new Timer (10000);

  FeatureState_Timer.addEventListener (TimerEvent.TIMER, Feature_Timer_Function);

  FeatureState_Timer.start ();

  Message.Visible = true;

  }

• Why is the battery loses power even when connected to the wall of entry?

  I always use my laptop connected to the wall outlet and the battery loses power no matter why is - this?

  Hello

  Laptops today are designed to switch to the battery and drain a little and
  Re-load. This keeps the successful battery and helps to prolong its useful
  life.

  Both my Toshiba will be the battery once a week and 80% drain
  and then reload. Of course once they have re-charged they workpieces then on
  A/c power.

  If the laptop does not back the the a/c, then there may be a problem with
  the charger, charge the cell phone circuit, or the battery.

  =========================================================

  The information below is mainly for Windows 7 but it generally applies to both
  Vista and XP. If you have Vista or XP and need more help please ask in the
  Forums Windows answers corresponding to your version of Windows. Also, please provide all
  the information that we need for us help to help you.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8 drivers/software for the Photosmart C7280 printer/Scanner

  Hello

  I have a HP Photosmart C7280 printer/scanner. I have recently installed Windows 8 Preview Release and discovered that the software I have installed Windows 7 doesn't seem to work as well. On the Setup, the only butotn displayed is "Exit" - that's why I can not install the software and drivers.

  Are there solutions available for Windows 8 again (even if its only beta software - I'm happy to give it a go)?

  Thank you

  Jamie

  Hi Travis_C,

  Thank you very much for the reply.

  What happens to me with respect to scan using Windows' built in the analysis Assistant which is OK but that only gives me the option to save as a bitmap, .jpeg, .gif, .png or .tiff.

  Software of HP that I used in Windows 7 accepted save me the scanning to PDF which is what I want in this case. Is it possible to get this software to run in Windows 8? In addition, will you be brining a version of Windows 8 of this software?

  Thank you

  Jamie

• I can't stop the automatic delivery of applications. on HP Photosmart 5520 printer all in one

  I can't stop the automatic delivery of applications. on HP Photosmart 5520 printer all in one

  To add to what sabertooth04 said, here a link to a document that deals with the applications of printing for your printer model. Click the menu drop down titled "Managing planned delivery Print Apps" and the option to cancel or remove an application will be available for you click on and examine measures to remove this application. I hope this helps.

• How can I check the level of ink on a HP Photosmart C4200 printer all in one

  How can I check the level of ink on a HP Photosmart C4200 printer all in one

  Hello

  Read the PDF of HP paper on your printer:

  http://www.HP.com/CTG/manual/c00897310.PDF

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Help: Why the IP addresses change in a multi-router Home Network (Wrt320n, wrt54g2)

  I am trying to update my routers and computers at home. Previously, I had a router connected to the internet with a wireless G and an another wireless router connected to the external router with another wireless G network. The external wireless network was used to play games and the internal network has been used for all the other stuff TIVO, access points of impression, computers, etc. The external network had 192.168.1.x ip addresses, and the internal network addresses are 192.9.2.x used routers were linksys wrt54g and wrt54g2. Everything worked.

  So I bought a Linksys wrt320n and put in place that the external router. However when the internal router is connected to the external router, the ip addresses of the devices connected to cable networks and wireless to the internal router are numbered 192.168.1.x instead of what I expected (192.9.2.x). This resulting in the Buffalo Access Point and the access HP Points not being seen in the network. In addition, if I disconnect the internal router to the external router, after reboot ip addresses are what I expect.

  Of course, technology has changed or I was very lucky. But why are the IP addresses internal changed/performed by the external router? I watched as each private network between them.

  Any recommendations? I hope that there is a setting I can change to fix this. Any help is appreciated.

  1 192.9.2.0/24 is a subnet public IP, which is owned by Sun Microsystems. It isn't a private IP address subnet available for private use. I recommend you change the subnet to a private inside 192.168 IP subnet. *. *. With the IP subnet, you use currently, you can access these public Sun IP addresses if you need them...

  2. what you write seems to me as if you connect the internal router with an external router LAN port. With your configuration, you must connect the internet port of the router internal to an external router LAN port.

• Satellite Pro M70 failed to refresh an IP address after reboot of the router

  My laptop is not able to repair the Wi - Fi connection is if I reset the router. I have to power cycle the phone so he can always reconnect as it gets stuck on getting the network address... Known problems with the hotfix on this matter or anything...?

  Thank you

  Huw D.

  Hello Huw

  As much as I know there is has no problems known with WIFI connection and I n know exactly what happens with your WIFI connection. After the reboot of the router try turning off the WIRELESS card with for a short while, turn it back on and try to connect again.

  The parameters are the same and nothing should be changed.

  Good bye