IP name-server and dns server
Hello world
Could someone tell me the difference between the two commands please?
IP-name server
(in DHCP pool installation) DNS server
I don't understand if I need two of them, or what you do. Thank you Triet Triet, The name-server ip x.x.x.x is for the "router" to reslove DNS queries. In the DHCP pool, the x.x.x.x dns server is for the DHCP client to use for DNS queries. What you trying to do? Tags: Cisco Security The domain name server ( DNS ) is not accessible Hello see this link: Original title: connection internet wireless Sony Vaio problems I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do. How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you. Help us help you: http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post. Troubleshooting Internet connectivity 1 answer to the first and second troubleshooting Questions: First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have? The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this? Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside. 2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites. 3. If #2 is not applicable: a. unplug the router. You now have an Internet connection? Otherwise: 4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it. If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service. MS - MVP - Elephant Boy computers - don't panic! on AD and DNS requirement in vCenter server installation Hello, I am facing installation stuffs now. It's about installation vCenter server 5.5 under windows. I'm just in my lab. He went well when I installed vCenter server device and I can do the remaining animals vSphere. But this time I must try to use vCenter in windows. I'm stuck in the 'server URL search"in installing vCenter. Is it OK to install the vCenter without AD and DNS server as I do now. If this isn't the case, pls guide me. You must at least COMPLETE your vCenter server field cannot be resolved and if you do not have DNS server in your lab, try to configure the host files... and on the announcement, if you do not have Active Directory domain or the vCenter Server belongs to a workgroup, not all features are available. To see a list of the software requirements and best practices for installing vCenter Server, check this KB: article: installation vCenter Server 5.5 recommended (2052334) There might be a problem with the configuration of your DOMAIN NAME SERVER Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless. We do not know how your system should be set up - including the DNS configuration and settings. I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself). It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider). Give them a call. I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help. I think it's your best chance to solve this problem. I hope this helps. Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. My domain is registered with justhost. I pushed my site live muse of catalyst for business and he gave me the name of the server. When I try to add the name of the server of muse to the justhost domain will not work. It says 'invalid name server '. There are two different ways, I think you can do that, it depends on your domain host, which of the two will work. I hope this helps. CARI [A step-by-step installation of Oracle Names Server | http://www.dbazine.com/oracle/or-articles/liu1] - - - - - - - - - - - - - - - - - - - - - I hava a ME Cisco 3400 with physical single port available for a cable connection. The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90. The host computer is a dual Xeon computer with two NICs for LAN and WAN. Fields of application: to install a windows 2008 R2 between public and private network server. Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers) The desired configuration: To have installed with his roles behind a WS2008R2 has RRAS. without a VPN. b with VPN and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255). First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD) Network configuration: Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing: Host IP: 89.120.29.90 Mask: 255.255.255.252 Gateway: 89.120.29.89 DNS: 193.231.100.130 my ISP name server address. OK, I can browse the internet. Second stage. (Consider DNS and Active Directories) DNS instaled role for this computer. AD installed as a global catalog. NETWORK WAN server that is directly connected to the Cisco router: Conection area 3 Properties: Client for Microsoft Netwaork: not verified Network Load Balancing: not verified File and shared printer: not verified QoSPacketScheduler: not verified; Microsoft Network Monitor 3 pilot: not verified IPv4 ; checked Pilot a Link Layer Topology Mapper i/o: checked Link layer Discover responder: checked IPv4 tab Host IP: 89.120.29.90 Mask: 255.255.255.252 Gateway: 89.120.29.89 DNS: 193.231.100.130 my ISP name server address. under the tab advanced IP settings : even that, tab IPV4 with automatic metric check; DNS tab : Add primary and connection suffixes DNS specific: not verified Add suffixes primary DNS suffixes parents: not verified Add this DNS suffixes: no Registry deals with this connection in DNS: not verified; Use this connection DNS suffix in DNS registration: not verified; WINS tab : enable search LMHOST: not verified Enable NetBios over TCP IP: don't check; Disable NetBios on TCP IP: checked; Connection to the local network 2 Properties : Client for Microsoft Netwaork: checked Network Load Balancing: no File and shared printer: checked QoS Packet Scheduler: not verified; Microsoft Network Monitor 3 pilot: not verified IPv4 checked Pilot a Link Layer Topology Mapper i/o: checked Link layer Discover responder: checked IPv4 tab NETWORK LAN CARD: 192.168.0.101 Mask: 255.255.255.0 Gateway: 192.168.0.1 under Advanced tab: IP settings : even that, tab IPV4 with automatic metric check; DNS tab : Add primary and connection suffixes DNS specific: checked Add suffixes primary DNS suffixes parents: not verified Add this DNS suffixes: no Registry deals with this connection in DNS: checked; Use this connection DNS suffix in DNS registration: checked; WINS tab : enable search LMHOST: not verified Enable NetBios over TCP IP: check;
Disable NetBios on TCP IP: not verified;
Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator. In any case, for the beginning, I have a fix IP, do not get IP automatically. At this point, it gets the configuration simple posible for RRAS follows: 3, LAN connection that corespond to the WAN interface IP: "NAT configured for the following Internet interface: Local Area Connection 3. network address: 192.168.0.0. netmask 255.255.0.0. After Windows RRAS are open: The Network Interfaces tab: NICs are enabled and connected; UAL remotely & policies: Launch NPS, on the NPS server tab: Allow access to successful Active Directory directories: Properties: authentication: port 1812,1645 kept port 1813,1646; on the accounting tab: nothing; under NPS policies: Grant permission for the RRAS server under builin\Administrator of the accounts; On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn) under the static road: nothing; under the IPv4 tab or both are there(there IP) and are up under NAT Connection to the local network 3: public interface connected to the internet enable NAT on this interface: under the address pool: ISP addresses public;(two addresses) under the terms of service and the ports: Web server: http 80. (I have I have a static IP address for the client computer in mind, I set up a single customer). At the client computer : configured as domain customer and added to the users AD and computer AD logon to the domain: Local Area Connection Properties: Client for Microsoft Netwaork: checked Network Load Balancing: not verified File sharing and printer: checked QoS Packet Scheduler: checked; Microsoft Network Monitor 3 pilot: not verified IPv4 ; checked Pilot a Link Layer Topology Mapper i/o: checked Link layer Discover responder: checked IPv4 tab Host IP: 192.168.0.101 Mask: 255.255.0.0 Gateway: 192.168.0.1 DNS: (auto-add the same to the local machine). under the tab advanced IP settings : even that, tab IPV4 with automatic metric check; DNS tab : Add primary and connection suffixes DNS specific: checked Add suffixes primary DNS suffixes parents: not verified Add this DNS suffixes: no Registry deals with this connection in DNS: checked; Use this connection DNS suffix in DNS registration: checked; WINS tab : enable search LMHOST: not verified Enable NetBios over TCP IP: checked; Disable NetBios on TCP IP: not verified; right now the 192.168.0.101 client cannot connect to internet through RRAS. ; This issue is beyond the scope of this site and must be placed on Technet or MSDN I am currently evaluating VMware on a set of blades with ESXi. I set up a pair of network cards to form the management network and activated VMotion on them. VMotion works very well between guests both manually and with DRS. However I'm not sure how do I configure HA, trying to turn on HA my cluster test fails because the hostname and IP do not match. The dedicated management network is not a DNS server because it is just the blades and chassis switches. I manually assigned each blades management IP through the ESXi set up the screen on each physical host. Is there any reason HA cannot use IP addresses? If I have to use for the name resolution, these configurable in/etc/hosts using ESXi? I have attached a screenshot showing the network configuration of one of my hosts (VMotion is enabled on the "management network"). If you have experience with a similar set to the top it would be much appreciated. Thank you Will be You must place the FQDM and IP address of all ESX servers in the cluster in the file on each ESX host: Do not remove the next line, or various programs who require network functionality will fail. 127.0.0.1 localhost.localdomain localhost SERVER NAME SERVER IP ADDRESS SERVER IP ADDRESS THE SERVER FQDN for example 192.168.1.12 monserveur.masociete.com If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you! Svchost.exe with service Client DHCP [Dhcp] and DNS Client [DNScache] high memory use I'm using Windows 2003 standard Server SP 2 found problem svchost.exe run service Client DHCP [DHCP] and DNS Client [DNScache] I have 4 servers and the same symptoms. Anyone know why it caused? Hello http://social.technet.Microsoft.com/forums/en/category/WindowsServer Time Capsule has lost the Internet connection and DNS servers I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address. I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place. It may or may not be important to mention the following: 1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time. 2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly: I would be grateful for any advice. Weird how everything's going well for a few years and then crazy when you have something will change. El Capo adds some network problems more... but something could be fundamentally wrong with the installer. Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated. You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...! 1. I need to know what modem you are connected. Make and model please? 2. the most important. What is the main router on your network or a modem? I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same. https://discussions.Apple.com/thread/6509420 It is not so difficult... You just know where you're going before you start. Airtport Utility cannot find airport Time Capsule on one of my Macs 2009 Passage of Oracle Dataguard and DNS Hi, a few days ago, we planned a passage in a configuration of 10g dataguard (dataguard pasive) between the 2 servers. primary: Europe.com APP secondary: APP1 in Asia.com The two databases was Oracle 10.2.0.3 in Redhat (single instance) Everything is going well with databases and the digital switchover but what happened with the web-based applications? I have a lot of web PHP applicattion provided with a string of connection with OIC and oracle customer, all have the connection as user/pass@dbname where dbname is defined in the local tnsnames.ora with DNS host names. (All have xxx/xxx@APP), and was APP (host:europe.com and SID = APP) Europe.com was ip 1.1.1.1 Asia.com has been ip 2.2.2.2 My primary instance was APP (name sid) and the standby APP1 (name sid) but what happened when I pass the dataguard? Yes, because we have a lot of requests and we don t change the connection string, each of them tries to connect to the new basis of Eve physics APP which is in Europe.com. (and the main news is APP1 in Asia.com) Well, first of all, I must change the SID in the database (same as the primary database) waiting for the connection string, for which I have: (thus development are don't want to change the string of connection...) (1) immediate stop aid database (2) remove the dataguard broker configuration, (3) change the instance name in the spfile APP1 to APP. (4) change the name of db in the spfile APP1 to APP. (5) change the setting fal_client (INSTANCE_NAME = APP1) to (INSTANCE_NAME = APP) (6) change the app APP1 orapwd file (7) Exchange configuration bash_profile APP and re start the database pending. (8) check the listener.ora, so that the new listening service is APP and no APP1 (8) with respect to the dataguard broker configuration config OK, everything works very well and we have the main and the database pending with the same SID. But what happened with the dns servers? because the web-based applications will try to connect to APP but APP has been defined as Europe.com and I want to redirect Asia.com as primary database. Well, first of all, I changed all my settings and broker dataguard over IP and not dns configuration files, so I made a guide to procedure for the passage to the then when we said that, first we must transition to digital, data bases and then the surface NET must change the DNS for new Europe.com dns point to 2.2.2.2 ip After that, everything works great! So in conclusion, to forward a permutation with dataguard (which was an excellent feature) check the connection of the chain of applications and take care of them) and if necessary, use the same SID for the two (databases) and emergency (In Oracle 12 c, we have a lot of thing to use as a continuation of the app for that) Kind regards Hernan Hi Herman,. Maybe I'm mistaken, please correct me if this is the case.
Assuming you are using oracle customer why not just use the construction in the mechanism for this purpose? DNS has nothing to do with it, but I see people using it yet for this - it is not only suitable for failovers, I do not have my TTL of 60 seconds or less to my recordings of A.
I had a project for banking HA where after permutation is launched the application (Tomcat) could in a minute to connect automatically to the database of watch on the Internet. First, you must use the database instead of SID service, so you can have the same service on the previous day. What more have a service, you can be sure that it will run the day before until it becomes primary, otherwise you can find yourself in a funny situation. Secondly, why not using built in failover of the connection string parameter, this way you can queue db (s) and in the case where your primary does not that the oracle client will simply try to connect to the waiting (to search for the same service). To ensure that the standby database does not have the service at any time, you can deploy trigger (AFTER startup) to check the role of database, if it is 'primary' it starts just the database service. Kind regards EVS How change/re-name files and bookmarks in the bookmarks list How can I change/re-name files and bookmarks in the bookmark list. As in IE, I want to be able to rename them, edit and organize your files and bookmarks in the bookmark list. In Mozilla, if I right click on a file in the list, it does not give me the ability to rename! (an oversight?) Click right a bookmark, then choose Properties and rename it. See also: Backing up and restoring bookmarks Thank you Please check 'Resolved' the answer really solve the problem, to help others with a similar problem. I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase? I would get one that has 4700 comments already. How can I change the information in the fax says he comes. Including the name, number and address How can I change the name, address and number on my brother (MFC-490cw)? Hello What version of Windows is installed on the computer? For support on this issue, it is best that you contact Support of brother to get help. How can I backup iphone external HARD disk? How can I backup iphone of my windows 10 external HARD disk? Flex 2 15 is no boot from usb stick w Win 7 image I recently bought a Flex 2 15 and want to install Win 7. I created a bootable Windows 7 USB drive with the Microsoft tool and it works very well. The problem is, no matter what I change in the Bios or Boot manager, the laptop does not boot from usb. OK, I know that this question was asked before here and other places, but I tried a lot of things and still cannot get him to stop. I use Outlook 2007 to access my aol e-mail account. Until recently it has been works well with none or very few proble When you configure isakmp on the routers to set up an ipsec tunnel, which side will open the session for udp 500? Or both sides will attempt to open the session at the same time? Thank you BlackBerry smartphone how to install BlackBerry 4.5 system software in the Blackberry 8310? I followed the instructions to download and install the BlackBerry Desktop Manager 4.5 and the BlackBerry Device Software 4.5 for BlackBerry 8310. This has been done correctly and that the installation was successful.When I opened the Desktop ManagerSimilar Questions
http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question
b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
c. wait 60 seconds.
d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
e. plug the router and wait until all lights are on.
Can any body tell me where I can get some advantages disadvantages n of Oracle Names Server and its configuration also steps.
Aqeel Nawaz
Kamran Agayev a. (10g OCP)
http://kamranagayev.WordPress.com
The clients on the local network will assign the IP addresses of the following range:
use a lot around 2 GB of memory. Virus scan try and Hijackthis is not found. I try to restart memory return service.
Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.
Regards, Paul
http://www.brother-USA.com/support/Maybe you are looking for