iPad Air system of operation not supported.

Similar Questions

• Guest operating system "fedora" is not supported.

  I try to install fedora os but I get this error:

  "Guest operating system"fedora"is not supported.

  Please select a guest operating system in the general page under the settings of the VM Options tab. »

  I tried in vain.

  Help, please!

  Oh yes, do not use Easy Install. Use the option 'I'll install later' and then follow the instructions I posted in my previous post.

• Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  I have visual studio 2010 with Crystal reports extension add on.  Everything works perfectly in development (Win XP Sp3).  When I create my Web site and try to access a report crystal on my web server (Windows 2003 R2 32 bit) I get the following error:

  Unsupported operation. Cannot open a document processed by the engine of JRC in the C++ stack. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Runtime.InteropServices.COMException: Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  Source error:

  An unhandled exception is generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception below stack trace.

  Stack trace:

  [COMException (0 x 80041811): no support of operation.] A document processed by the engine of JRC cannot open C++ stack.] CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open (object & DocumentPath, Int32 Options) + 0 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open (object & DocumentPath, Int32 Options) CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened (+ 95 + 270) [CrystalReportsException: load failed report.] CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened () + 333 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID () + 31 CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport (context RequestContext, Boolean bAddToCacheWhenCreated) + CrystalDecisions.Web.CrystalReportSource.get_ReportDocument () + 201 Reports_POD 438. Page_Load (ByVal sender As Object, ByVal e As EventArgs) + 55 System.Web.UI.Control.OnLoad (EventArgs e) + 91 System.Web.UI.Control.LoadRecursive () + 74 System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) + 2207

  I installed CR2008, 2011, etc. nothing works.
  I've looked everywhere for a solution to this error.
  If anyone has a solution please post.  It would be much appreciated!

  Thank you

  WS

  Salvation Will Stoner,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en/vsreportcontrols/threads

• Operation not supported. Check the log of the applications for more details.

  It is my second day of learning ColdFusion. I am able to view the .cfm pages. However, when I tried to browse/load the .cfc file, I kept getting this error.

  Operation not supported. Check the log of the applications for more details.

  Here's my simple tests codes.

  < cfproperty hint = "First CFC" >

  < cffunction name = returntype 'getValue' = 'Chain' access 'public' = >

  < cfreturn "Hellow World" >

  < / cffunction >

  < / cfproperty >

  Where is the "application log" so I can check for more details?

  You should not really 'Browse' for SWC files, in general.  But if you do, then you might want to give the function an output attribute = "Yes".

  The newspapers are easily read in the CFAdmin (go debugging & logging on the left navigation, then choose "Log Files" under this and click on "application.log" in the list of newspapers).

  Alternatively, you can also use Windows Explorer (or what file viewer your use OS) and navigate to {cfDirectory} cfusion\logs, find the file "application.log" and open it.

  HTH,

  ^_^

• Satellite Pro L20: Configfree Setup error - system only is not supported

  I tried to update the Configfree with a version more recent on the Toshiba support (for PRO L20 series) site.

  Setup uninstall me the old version and after that it me to say that "the system is not supported.

  How to recover or reinstall my Configfree without using the recovery CD.

  Thank you

  I m wondering if you used the right and compatible ConfigFree Utility.
  It seems you didn t, and so this error message occurred.

  > How to recover or reinstall my Configfree without using the recovery CD.
  I don t think you will be able to reinstall it from the recovery CD without having to install the entire operating system because you will find on the only recovery CD image file. That's why it of not possible to extract individual files, the image of Toshiba programs.

  If you n t want to reinstall the whole OS using the recovery CD, then you can try putting the BONE to this early time by using the System Restore tool.

  Check it out!

  Ciao

• When I send an email from my iPad Air to the recipients not Apple and tech photos using the camera icon, the photos are received very extended, larger than the viewing page. What I am doing wrong?

  When I send an email from my iPad Air and attach a photo usping the camera icon, it is received on the devices not Apple very extended and unable to be read. What I am doing wrong?

  You're probably doing nothing wrong.

  One thing to try is after inserting that tap photo images and then change the size. If it works, you have my CCC friend to thank for calling your issue to my attention.

  Tap.

  

  Tap.

  

  Receipt by e-mail.

  

• Help please: CloneVM_Task is created but will fail with: operation not supported on the object

  Someone Please help with this, I'm breaking my head with this for 5 hours now.

  I submit, in CloneVM_Task with the following XML (which returns a task id back http://i.e. the application has been accepted in this format):

  & lt; CloneVM_Task xmlns = "urn: vim25" & gt;

  & lt; _C type = 'VirtualMachine' & gt; VM - 938 & lt; / _This & gt;

  & lt; record type = "Folder" & gt; Group d1 & lt; / file & gt;

  & lt; name & gt; 1_UBUNTU 804 & lt; / name & gt;.

  & lt; spec & gt;

  & lt; location & gt;

  & lt; data store type = "Datastore" & gt; datastore-683 & lt; / store data & gt;

  & lt; pool type = "ResourcePool" & gt; resgroup-57 & lt; / pool & gt;

  & lt; / location & gt;

  & lt; model & gt; 0 & lt; / model & gt;

  & lt; powerOn & gt; 1 & lt; / powerOn & gt;

  & lt; config & gt;

  & lt; memoryMB & gt; 1024 & lt; / memoryMB & gt;

  & lt; numCPUs & gt; 1 & lt; / numCPUs & gt;

  & lt; / config & gt;

  & lt; / spec & gt;

  & lt; / CloneVM_Task & gt;

  However, the task itself returns an error saying: the operation is not supported on the object.

  Does anyone know what it is?

  The info that I'm sending should be 100% correct:

  - vm_id: the machine ID of the virtual MODEL VM I'm cloning (100% certain that it is correct)

  - file: the rootFolder returned by ServicContent

  - data store: the data store ONLY I should store VM on. When I query for this data store information it shows clearly that it is accessible and multipleHostAccess = true, so

  - resourcePool: I got this info when querying my ComputeResource properties. I have 1 cluster and resourcePool value that's what I put.

  I really have NO idea what's going wrong here... The CloneVM_Task creates a task - but that's where everything falls apart.

  Please HELP!

  Yes, you should not use the rootFolder, which is just the folder root inventory integer vCenter. A default vmFolder will still exists if you have additional folders, and that's the one you reference to. By default, you must question him to do this, where one day you decide to create folders against hard coding moref ID. The IDS are digital and probably default folder gets this value by iteration, but again, I recommend he petitioned against hard this coding.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Basic embroidery software PED by Brother Sewing machine "Help windows system" only is not supported

  I downloaded and tried to install the patch (. Windows6 0-KB917607-x 64.msu) on Vista Ultimate SP2 64 bit and it says this update is not necessary for my system, but when I try to access it using a window opens and says go here and this, install the hotfix above. Thanks in advance Bill Smith

  Hello

   
  I suggest you try to install it in clean boot and check.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• "Operation not supported" when you create virtual machines in nested virtualization

  Hello world

  I'm quite new to ESX so I decided to give it a try by installing nested within VMWare Worktation 10 for Linux.

  My CPU is an i7-4960 x with 64 GB of RAM so VT-x/EPT gone automatically. 16GB gives ESX.

  Networking configured, also some systems of NFS files, the Datacenter newly created for storage (exported from my base OS Ubuntu 13.10) and attached my virtual ESX (via vCenter appliance).

  What's weird is that I tried to create a Windows 2008 R2 VM in ESX, but the installation does not start a "unsupported operation" appears on the management of web vshere.

  I'm stuck here, trying to find a reason for this.

  I would be really happy if someone out there could help me solve this puzzle.

  Thanks in advance.

  Try to delete the USB controller.

• iPad Air web pages does not open

  I have that I can open pages in browser and access to the browser, but if I do a search on anything, the web pages not will be open through any search engine

  Go to settings - Safari - clear the history and data from the Web site.

  Temporary disable JavaScript: http://appleinsider.com/articles/16/03/28/web-link-bug-in-ios-93-causes-apps-to-crash-gel

• Flash Pro CS6 with Air 14 SDK does not support iOS7 icons?

  I am trying to publish an application using the Air SDK 14.0.0.110 (and tried 14.0.0.137) and there is still no place to put the files of icons iOS 7, 120 x 120, 76 x 76 and 152 x 152, is this correct?

  Your only choice is to build from the command line, or replace with Flash Pro CC 2014.

  Read this long thread for how you publish from the command line without having to get the whole typed command perfectly (you can get the line from the Console):

  https://forums.Adobe.com/thread/1308215

• External table ORA-30657: operation not supported on external organized tab

  Hi all
  I'm trying to create a table outside and fill it with data from my DB. Without the AS - Section all right. The external table will be created, but I do not get the data into it. Is there a possible way to write data defined in a flat file via external table or some other mechanism?
  
  Carsten cordially
  
  The full statement:
  
  CREATE or REPLACE DIRECTORY admin_dat_dir
  LIKE 'E:\CDDTEST ';
  CREATE or REPLACE DIRECTORY admin_log_dir
  LIKE 'E:\CDDTEST ';
  CREATE or REPLACE DIRECTORY admin_bad_dir
  LIKE 'E:\CDDTEST ';
  DROP TABLE cdd_ext_vt;
  -creation of the external table
  CREATE TABLE cdd_ext_vt
  (vertrag_nr VARCHAR2 (25),)
  kunden_name VARCHAR2 (60)
  )
  EXTERNAL ORGANIZATION
  (
  TYPE ORACLE_LOADER
  Admin_dat_dir default DIRECTORY
  ACCESS SETTINGS
  (
  records delimited by newline
  BadFile admin_bad_dir:'empxt%a_%p.bad'
  logfile admin_log_dir:'empxt%a_%p.log'
  fields completed by «,»
  missing field values are null
  (vetrag_nr, kunden_name
  )
  )
  LOCATION ("cdd_ext_vt.dat")
  )
  REJECT LIMIT UNLIMITED
  
  AS
  Select vt.vertrag, chr (34) | Trim (Person.Name) | Chr (34)
  VT, person
  where vt.syskd = person.sysperson
  and rownum < 11
  ;

  Carsten,

  You can use this to dump this procedure in csv file

  create or replace function  dump_csv( p_query     in varchar2,
                                        p_separator in varchar2 default ',',
                                        p_dir       in varchar2 ,
                                        p_filename  in varchar2 )
  return number
  is
      l_output        utl_file.file_type;
      l_theCursor     integer default dbms_sql.open_cursor;
      l_columnValue   varchar2(4000);
      l_status        integer;
      l_colCnt        number default 0;
      l_separator     varchar2(10) default '';
      l_cnt           number default 0;
  begin
      l_output := utl_file.fopen( p_dir, p_filename, 'w' );
  
      dbms_sql.parse(  l_theCursor,  p_query, dbms_sql.native );
  
      for i in 1 .. 255 loop
          begin
              dbms_sql.define_column( l_theCursor, i, l_columnValue, 4000 );
              l_colCnt := i;
          exception
              when others then
                  if ( sqlcode = -1007 ) then exit;
                  else
                      raise;
                  end if;
          end;
      end loop;
  
      dbms_sql.define_column( l_theCursor, 1, l_columnValue, 4000 );
  
      l_status := dbms_sql.execute(l_theCursor);
  
      loop
          exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
          l_separator := '';
          for i in 1 .. l_colCnt loop
              dbms_sql.column_value( l_theCursor, i, l_columnValue );
              utl_file.put( l_output, l_separator || l_columnValue );
              l_separator := p_separator;
          end loop;
          utl_file.new_line( l_output );
          l_cnt := l_cnt+1;
      end loop;
      dbms_sql.close_cursor(l_theCursor);
  
      utl_file.fclose( l_output );
      return l_cnt;
  end dump_csv;
  /
  
  REM Here is an example of using the above:
  
  create or replace procedure test_dump_csv
  as
      l_rows  number;
  begin
      l_rows := dump_csv( 'select * from all_users where rownum < 25', ',', '/tmp', 'test.dat' );
  end;
  /
  

  HTH
  SS

• OfficeJet 8710 Vista installation fails as operating system not supported

  I have a friend who just got an OfficeJet 8710 printer and software installation problems.

  She has a computer HP (listed as p6110y), 64-bit Vista Home Prem w/SP2

  When we try to install the software from the CD is States that the operating system is not supported. I went to the HP site and it detected running on Vista and downloaded the webpack_OJ8710_1881.

  A ran it and the same error, the operating system that is not supported. Tried running it as an administrator, even. Went into the temp folder to run the installer directly, even. Uninstalled the old 8600 printer, rebooted, tried the installation, same error.

  Wireless printer and * not * connected USB.

  What else can we try?

  Thanks in advance,

  Hello

  I suggest you to contact the retailer and replace the printer with a different model, the 8710 is not compatible with Vista 64 bit

  You can find the specifications of the product below:

  Minimum system requirements
  Windows Vista: (32-bit only)http://store.hp.com/us/en/pdp/printers/hp-officejet-pro-8710-all-in-one-printer-m9l66a-b1h
  

  Shlomi

• When you try to run Microsoft FixIt XP, get message 'operating system not supported.

  I am running Windows XP, IE 8. I always used Microsoft Fix - it for the problems I encountered. Today, it is telling me my operating system only is not supported. Why, when nothing has changed on my end?

  Hi Ladybug!

  Given that the problem is related to Microsoft Fixit, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.

  Microsoft Fix Center - NO support general questions Forum

• Update the BIOS, "Current running on a system not supported"

  I'm trying to update the BIOS on a Dell Dimension E521 originally shipped with Win XP, but I recently did a fresh install of Win7 on. When I try to run the installation program, it gives me 'information system' system 'unknown', & "running on a system that is not supported" notice & will not let me continue. What happens with that, & how do I fix the problem?

  Hello

  Latest version of the BIOS for your PC back in 2007 so it will hardly make a difference with Windows 7 performance.

  What are you trying to solve with the update of the BIOS?

  Unfortunately, DELL only offers updates via Windows (XP only, in this case) and not via BACK like many others don't.

  Carlos