iPad/Logitech bluetooth questions

Similar Questions

• Logitech bluetooth keyboard K480 pair with my Windows 7 computer

  * Original title: Logitech bluetooth keyboard K480

  I have a Logitech bluetooth K480 keyboard won't pair with my computer Windows 7, the devices to show but it does not work with the key board.

  Joe

  Hey Joe,

  Thanks for posting your query in Microsoft Community.

  It can happen because of the conflict of device driver if Windows update tries to install the updated driver for a device that has an updated driver.

  • What is the brand and model of your computer?

  While you reply us with the above information, you can try the following solutions and check if this solves the problem.

  Method 1: Run the corner hardware store and check if it detects problems.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2: Try to remove and then reinstall the keyboard.

  First, connect a wired keyboard or mouse to your computer. So, if you have Bluetooth wireless technology installed on your computer, follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click on Bluetooth

  Devices.

  b. Select the keyboard or mouse that does not work, and then click Remove.

  c. click Add, press the reset button on the bottom of the keyboard or mouse, check the box my device is set up and ready to be found and then click Next.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  e. If you have tried this step several times, and your computer still cannot find the device, check that the device has fresh batteries.

  f. If the device is a keyboard, exchange of security with the keyboard keys. If the device is a mouse, click don't use a passkey. Follow the remaining instructions in the wizard.

  See also: compatible devices with Bluetooth problems

  Hope that the information provided is useful. If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.

• IPad 2 bluetooth does not work with bluetooth speakers?

  iPad 2 bluetooth does not work with my bluetooth speaker? What should do?

  to connect a bluetooth headset or a speakerphone with a device, it has not been used with before the bluetooth headset/speaker should be placed in the pairing / discovery mode, how do we do everything therefore in the manual of the bluetooth headset / speaker

• Logitech bluetooth mouse M557 keep disconnecting

  Just bought a mouse Logitech bluetooth mouse (M557) a few days ago. It was easy to have detected it, however, I realize it loses connection every time that the macbook is left idle for a period of time (a few minutes)... Very annoying, because it seems impossible to reactivate the connection other than logging on my session (or computer reboot) and only then it will reconnect by itself.

  I am also newly on OSX 10.11.3 (I read a few concerns about the Bluetooth under El Capitan...) so I was wondering if the mouse is the problem, or if it is related to OSX.

  Since the price tag on the Logitech is not much lower than the Apple mouse, also I was wondering if I would be more successful with the Apple mouse, I still can return the Logitech at this point...

  Rob

  This seems to be a problem of know-how of logitech, they have a download to try. http://www.gottabemobile.com/2015/10/02/how-to-fix-logitech-mouse-problems-in-os - x-el-capitan / Other that this sometimes reset a stroller can help.  https://support.Apple.com/kb/PH18761?locale=en _

• Logitech bluetooth mouse m555b guard disconnection on windows 7 64 bit on my thinkpad lenovo x 230

  My Logitech bluetooth mouse m555b guard disconnection on windows 7 64 bit on my thinkpad lenovo x 230.

  In my view, that it is a common problem.

  All solutions, pls?

  Is there a bluetooth mouse that is certain to work on Win 7 64-bit?

  Hello

  1. have you verified the functionality of the mouse in the other computer?

  2A it works fine earlier?

  3 have there been recent changes made on the computer before the show?

  I would like to inform you that Logitech Bluetooth mouse m555b is compatible with Windows 7 64 bit.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Logitech%20bluetooth%20mouse%20m555b%20

  Please follow the steps described in the following article and check.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

  For more information, see the link:

  http://Logitech-en-AP.custhelp.com/app/answers/list/kW/troubleshoot%20mouse%20problems

  Let us know if it helps!

• Logitech bluetooth boombox speakers does not connect to the laptop. Troubleshooting gives no driver

  Cannot find a driver for logitech bluetooth boombox speakers

  Hello

  Unfortunately, the device is not compatible with Windows 7. Then I suggest you to contact Logitech support.

  Logitech Forums: http://forums.Logitech.com/

  For your reference: http://www.Logitech.com/en-us/1201/8481

  Hope this information is useful.

• Logitech bluetooth headset is not detected by HP probook 4530 s

  Original title: how to pair the headset wireless for hp probook 4530 s

  I am trying to pair a bluetooth wireless logitech headset to my hp probook 4530 s, but my computer does not detect it.

  What should I do?

  Hello

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to use the Bluetooth wireless headset.

  The problem may be with the Bluetooth adapter or with the device itself.

  1. have you checked the device to another computer?

  2. What is the model of the unit?

  3 are you sure you've done the discoverabledevice?

  How to make a discoverable Bluetooth device varies with the devices. If you are unable to find how to make it discoverable, contact the manufacturer.

  I suggest you follow the steps mentioned below:

  Method 1:

   

  Check the settings to make sure that this computer can detect the Bluetooth device.

  a. open the Control Panel by clicking the Start button, then Control Panel

  b. in the search panel box command, type Bluetooth, and then click Change Bluetooth settings

  (c) in the Bluetooth settings dialog box, click the Options tab

  d. to make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

  e. to allow Bluetooth devices to connect to your computer, select the check box for allow Bluetooth devices to connect to this computer.

  Method 2:

  Run the fixit:

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  Method 3: Run the hardware troubleshooter

   

  See the site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, I suggest you to contact the manufacturer.

  You can also consult the site:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps. If you need further assistance, let know us and we would be happy to help you.

• M535 Logitech Bluetooth Mouse is not matching in Boot Camp

  I recently bought a Logitech M535 Bluetooth mouse for my iMac 27 inch Retina (end of 2015). I paired in OS X, and it worked like a charm.

  However, when I booted Windows Boot Camp, I went to the Bluetooth settings in Windows and it finds my mouse. However, as soon as it started matching, it gave me an error message saying that the device was not found, and as soon as I close the error box, the mouse has disappeared from the list of devices. Then, it maintains the unknown devices listing, and I knew that one of them had to be my mouse. I tried all, but they all failed sail.

  Is there a Bluetooth driver problem in Boot Camp? If so, when the next update comes out? Until then, I use the mouse Magic Mouse on Windows (which still works) and the mouse from Logitech on OS X.

  Check the update of the Apple software for possibly updated drivers.

• Can we pair it two iPad via bluetooth using the remote keyboard/third

  I intend to buy two of 'Presidential teleprompter' overall using two iPads.  It is possible to combine two iPad use keyboard / remote via bluetooth?

  There is not enough information on ""ikan ELITE-REMOTE Bluetooth iPad teleprompter remote control ", if the app could connect and simultaneously control two iPad ."

  He would be grateful if someone could suggest a solution.

  Thanks in advance.

  I think that the profiles of the https://en.wikipedia.org/wiki/List_of_Bluetooth_profiles#Human_Interface_Device _ Profile_.28HID.29 HID

  take only be connected to one device at a time

  for you to get what you want a program must be running on both devices, likely using the https://en.wikipedia.org/wiki/List_of_Bluetooth_profiles#Personal_Area_Networkin g_Profile_.28PAN.29

  Profile and then there is if it would be in violation of the rules of the sandbox in app store security but with 3rd party keyboard being taken in charge, it might just

• iPhone 4 impossible air to the ipad via bluetooth

  iPhone 4 (A1332)

  IOS 7.1.2

  IPad air (A1474)

  IOS 9.3.2

  Hello everyone, I am trying to use the app on an iphone 4 keynote to control a keynote on ipad presentation.

  It works fine on wifi.

  However as it's something outside, I use bluetooth and it does not work. Both devices can't see not even each other.

  I tried all the steps basic described everywhere, including here:

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connect again.

  In order to solve the problems more away, I tried to pair it with my macbook. The pairs of ipad without problem.

  However the iphone 4 does not see the macbook in a first time. The macbook sees the iphone, so I ask macbook pair. demand of coupling is displayed on the iphone but the iphone then is not pair. It shows my macbook and 'not connected', even on the macbook.

  Someone at - it a forward and could get out me of this pickle? I need to make it work for Monday or I'll be in trouble.

  Thank you!

  Happy Saturday, nicohk92!

  I understand that you want to use your iPhone 4 with Keynote Remote to control a presentation on an iPad. You are in the right place for answers.

  Using these two devices, you must have two devices connected to the same Wi - Fi network to use Keynote Remote as expected. Read this article: Use Keynote Remote on iPhone, iPad, or iPod touch

  If you use Keynote for iOS 2.5 or later and the two devices iOS have a lightning connector, devices must be connected to a specific wireless network. You can also use Bluetooth to connect your devices.*

  If you use an earlier version of Keynote on each device, or if each device has a dock connector (iPhone 4, iPad and iPad 2 3rd generation), make sure they are both connected to the same Wi - Fi network.

  Keynote Remote does not work on a network hosted by a Mac with Internet sharing, or a network led by an iOS device using Personal Hotspot.

  Your iPhone 4 lacks a lightning connector and instead uses a dock connector, it is a requirement to be on the same Wi - Fi network. You can consider using a more recent device like an iPod touch with a lightning connector or iPhone 5 and later versions, to control the presentation.

  Enjoy your weekend!

• Transfer photos from my iPad 2 iPad via Bluetooth Pro Air.

  I would like to transfer photos from my iPad 2 Air iPad Pro via Bluetooth, but neither straightens upward that others report. Any suggestions would be helpful.

  Using Airdrop for this? Or another application?

• Satellite A300 does not Logitech Bluetooth receiver.

  Hello

  My problem is that I don't know exactly what the problem...
  I have a laptop of 1MS Satellite A300 does not have built-in Bluetooth

  I have a bluetooth (MX5000 series) Logitech mouse that I installed for Windows Vista (I downloaded the latest driver of Logitech's official website)
  The Logitech software for bluetotth is called set point and the Assembly says I can connect other bluetooth devices through the bluetooth mouse receiver (like a cell phone, for example).

  The mouse works perfectly well, the problem starts when I try to connect my cell phone to the laptop (with the Nokia PC Suite software). I get a message that says that there is no bluetooth hardware installed. I tried to look in the bluetooth configuration control panel, but it isn't here. I can't find a folder or a tool that allows me to set up bluetooth.

  I would like to know what is the problem, why my laptop does not recognize the bluetooth receiver.
  I used to have installed on another laptop with Windows XP and it used to work without any problems.

  I tried the receiver in all the USB ports on the laptop with no result.

  Hi guys

  I can say with certainty that the Satellite A300-1 ms was not was equipped with the internal BT module and so the laptop does not recognize the Bluetooth receiver
  If you want to connect to the laptop to the external BT device then you need a BT USB key for example.

  Welcome them

• C2Y65AV dv7 Bluetooth question WANT after the victory of 8.1 to Win 7 Downgrade

  My laptop is an ENVYdv7 C2Y65AV

  He came originally with Windows 8.0, and I later upgraded to 8.1.

  I never liked 8.0 or 8.1 so I "had" to Windows 7 Professional. I did my research, realizing that there may be questions. I downloaded the drivers, bought a new drive hard, etc..

  Everything went past better than expected and I'm happy with the "downgrade", except for 1 issue.

  1. I have difficulties to get my Bluetooth to connect completely to one of my devices (headset or headset).
  My WiFi works well, I think the Bluetooth 4.0 is part of the Intel Centrino WiFi card. When connecting to any Bluetooth device, it appears in the Bluetooth devices screen. It will discover and 'connect', but nothing happens when I try to use them. The sound always comes through the laptop speakers.

  I have the Intel Centrino Wireless N 2230 BNHMW came with the laptop. It worked fine with Windows 8.1. All my devices Bluetooth paired easily with the laptop when Windows 8.1 is running.

  I went to the Intel Web site, made sure my driver for the wireless card for Windows 7 is the most recent and correct version. They have a software utility that installs on your laptop, then search and download the last correct version.

  I downloaded all the drivers for this HP downgrade, driver and software help section () of the Internet site. What great resource is this site!

  Suggestions? Advice?
  I appreciate any help!

  Thank you
  James

  P. S.

  One interesting thing about Windows 8.1.

  When I installed Windows 7 Professional, I bought a new hard drive SSD just for that purpose. I had saved my hard drive took a shot with 8.1 Windows on it just in case this downgrade are successful.

  Just for grins, I added it as a second hard disk (later) in the case where I needed to get the missed files.

  When I restarted my laptop, I went into the Manager startup and selected my main drive with Windows 7. It started normally.

  Then the seconds after startup, a message pops up saying that I had to reboot for the changes to take effect. I don't remember making some, but thought that something was updated?

  So I did. I rebooted and Windows 8.1 supports and edit files on my hard drive SSD (disk win 7) which ultimately disabled the Windows 7 boot disk.
  Attempt to start the hard disk Windows 7 has frozen just after the start of Windows 7 screen.

  I pulled the plug on the rebooted Windows 8.1 to Windows 7 hard disk. Before I could however, he had to scan the hard disk for changes and correct. Then Windows 7 booted up normally.

  This Windows 8.1 is of course control. Can you say 'Hal' from the film '2001 A Space Odessay'

  Hello

  The 2230 Intel chip is crap. I suggest to get decent bth less Intel 6235 or 7260AC to get a connection. The 2230 provokes many questions it is better to get rid of and use a correct wifi card.

  See how to change the order of boot on Windows 8 laptops:

  http://superuser.com/questions/663733/Windows-Boot-Manager-and-two-hard-disks

• Draw, Line and sketch all crashing on iPad if Bluetooth we

  Colleagues, draw, draw, line and sketch (all updated) all immediately plant them on my iPad (most recent iOS) if I have the Bluetooth ON (to my stylus), but all three apps work fine if bluetooth is DISABLED (can not use the stylus for the full potential). Do not have any problems with the iPad or other applications. Web watch search this has been a problem but can't find any resolution, fix, patch, etc. A few weeks of the trial and no luck, ideas and advice most welcome... - Andrew

  What iOS version are you running? If you are using iOS 9 beta builds, there is a known issue with Bluetooth with these applications. The workaround is to disable Bluetooth.

  Hope that helps,

  Frank

  Engineering drawing