Similar Questions

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

• How to stop the Notes app, scroll down to the opening

  I have an iPhone 6 s, IOS 9.3.2.

  The Notes application scrolls down when opening a Note.

  It was not used to do.  I don't like it!  Most of the time, I add a text near the top of the file.

  How can I stop scrolling down when I opened an existing note?

  I looked for a setting, but found nothing.

  just checked on the iPhone 6 + - it does not scroll down

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• Not possible to boot from the CD after installing Win XP on Tecra A3

  Hi all

  I can't boot from the CD more? I tried following things:
  -J' used several CDs to boot from, such as Windows XP, other CD CD WinXP or UBCD (ultimate Boot CD) and others to boot from.
  -J' chose in the start menu and the Bios first, the CD player must be started from.
  -Disabled the HARD, the LAN and the FDD drive so that only the CD must be started from, nothing else.
  -Press F12 after start-up und selected CD to boot from.
  -removed the battery
  -removed the disk drive HARD that the CD is only peripheral to start.
  -No available recovery disk.
  * Result: Always at top left corner a cursor flashing on a black ecran.*

  My story to this problem/question.
  -J' reinstalled Windows XP after the system became slow, with SP2 and SP3.
  -During the installation of SP3 and at the same time other pilot the system crashed.
  -Pressing F8 after starting, I can choose the Options to win.
  -System running days, several days without any reaction.
  -Sometimes, it goes into "secure mode" and freezes, no entry or possible reaction.

  I want to install Windows XP again from the CD and a clean version to work on.
  That means no two were leaving to work on alone.

  Can someone tell me why the CD player is with any media ignored inside and no departure from them is possible?

  Thanks for your help

  A strange question what s
  I put t know, but you did an update of the BIOS? Try it!

  Moreover, what laptop Tecra A do you have?

• all of a sudden all my adobe apps (cs6) leave at the opening, I tried to reinstall my CD but Installer is outdated. What should do?

  all of a sudden all my adobe apps (cs6) leave at the opening, I tried to reinstall my CD but Installer is outdated. What should do?

  CS3 is not compatible with Win10

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions Windows COMPLETE can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

• Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all scrambled together all left links

  Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all the links scrambled together on the left side of the page. Same thing with face book page. All use them to work properly. 64 Waterfox win 7

  Do not use waterfox, it is not supported and is a non-official version of Firefox that often has known bugs. Downlaod Firefox from www.getfirefox.com, uninstall waterfox, then try again.

• Does restart/reboot the computer after installing or uninstalling a program?

  Original title: does restart/reboot the computer after installing or uninstalling a program? Which option is it on Vista? Hit reboot? Or off, wait and then start up?

  I was told that if you add or remove a prgram, after it installs you need to 'reboot '.

  Is this true?

  Does this mean that, after the program is installed, you must reach the restart button? Or press 'stop' and then again wait a minute and then be able to save the PC?

  Hello

  Often an installation or uninstallation of will need to reboot to complete and it never hurts except for the
  time it takes.

  A reboot is usually sufficient.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. At the opening of th

  I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. When you open the zip files at this other app asked me if I wanted to extract zip files in a new folder, I have accepted, in both files .js (javascript) files there. I opened these .js inside this same application files and content files white text on black background and that seems to be a script file. My question is: my iPad Air has been compromised by a scam of viruses, such as the Trojan horse thieves and banking password especially as Dridex or Dyreza, the Trojans and ransomware as Locky, cryptolocker, or Teslacrypt. If that were the case, then what is the solution to get rid of these... Thank you.

  Simply delete them. It is not possible to install anything on iOS using this method. For good measure, you can remove and reinstall the application allowing you to open it with, but I don't really have that is actually needed.

• GIF images play not when I close Firefox and open it again.

  If I visit a website (for example http://www.sakisgouzonis.com) all GIF images work fine. But if I close Firefox and open it again (without hovering over the web page), all GIF images stand still. I have to spend on the web page for GIF images start to play.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • http://KB.mozillazine.org/Animated_images

• iPad slow apps updated compared to the same applications on android

  Why are they so slow to update on the iPad apps.

  Friends using the same game on android apps are updates days or weeks before I see them on my ipad

  If you mean that the updates are not available in the iTunes App Store then you need to ask the developer of why they are slow to bring into the store (it may be in part because of the App Store being more rigorous review process)

• LR6 does not not at the opening after change of motherboard.

  Hello

  I changed the motherboard, it's a Gigabyte H97M-D3H with an Intel i7 processor 5th gen.  I'm under Win10.  When I open LR, it shows the homepage but freezes and says: "no answer" when you try to click on any menu item.  I have the standalone version of LR6, don't know if it's the last update.

  Thanks for any help,

  Shawn

  All firstly, establish the exact version of Lightroom you have:

  With Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Lightroom.

  Find the lightroom.exefile, right-click and choose Properties.

  

  If the version number is nothing less than 6.6.1 go to the maintenance of Lightroom and download and install the 6.6.1 update.

  If LR still does not work, and you have successfully updated the graphics driver, try to disable the GPU in LR preferences.

  Since you can't access the menus in LR, you will have to do it manually:

  Make sure that Lightroom is not running.

  [With Windows Explorer, navigate to C:\Users\[your username] \AppData\Roaming\Adobe\Lightroom\Preferences

  Open the Lightroom 6 Preferences.agprefs file in a text editor such as Notepad.

  Close to the end of the file there is a line that says useAutoBahn = true, - change that to useAutoBahn = false,

  Save and close the file. Now, try to start Lightroom.

  

• Photoshop can't register / Auto-se closes at the opening

  -Very well,.

  I saw at least another user with this problem, and there is nothing which can be solved by signing in and out of the application Adobe CC, or even the Ctrl + Shift + Alt and the thing of the opening.

  So, recently, that I went with the $9.99 per month for the package for Adobe Creative cloud containing Photoshop and Lightroom.

  No matter what I try, he never invites me to enter a serial number to register for Photoshop, so any attempt to open it left its anti-piracy measures and makes force-close immediately after opening / once it finishes loading.

  When I'm able to try and register / finalize registration, he wants me to 'finish registration by updating your account information,' yet the page continually loops and clicking on "update and continue" brings back me to the same page. Who does not sign up for Photoshop.

  It is the reason why I have and perhaps others, are unable to use Photoshop because it auto-ferme after that fully loading, since he cannot be registered in the same way that Lightroom is.

  (Lightroom is saved immediately via a prompt at first start message, asking for a serial code, including one which is alread inserted / auto-inséré by the application Adobe Creative Cloud).

  After further investigation to prove my point, on my account, the only registered product is Lightroom.

  Photo: http://screencast.com/t/0PTyKbUVLA

  I tried customer support chat.

  Several times.

  Perhaps more than 16. Whenever the agent is down the same list and copy / pasted the same answers.

  It's sad that I have is that of limit and having the problem figured out.

  Apparently, I have to wait to contact their support team special Monday for that to be resolved.

  Although, it seems, the package is "Photography Photoshop (for CS3 + customers), program" which is not the version listed and announced throughout the site.

  (This package would indicate that I wouldn't be able to use Photoshop because I've not owned Photoshop before you buy this package).

  Yet, the only package that applies to is this one:

  http://screencast.com/t/pDylveniasI

  It's incredibly annoying.

  I'd rather support by email and I also much prefer to have a more clear description of the product if the one I selected turned out have been falsly advertised.

  Message has been slightly edited by: MrNameloc

  IT WORKED IT WORKED IT WORKED IT WORKED.

  Finally!

  What said Porfie Espinoza worked.

  Uninstall Photoshop CC.

  Uninstall Adobe CC.

  Go to: C:\Program Files (x 86) \Common Files\Adobe and find SLCache and delete.

  Go to: C:\ProgramData\Adobe and search for SLStore and delete it.

  Turn it back on.

  Install Adobe CC.

  Install Photoshop.

  Turn it back on.

  Alto.

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner