Using Xp and printing using Brother MFC 3240C

Similar Questions

• How to set up Windows Fax and Scan with Brother MFC-7440N printer/all-in-one

  Hello, I'm trying to set up Windows Fax and scan using my all-in-one Brother MFC-7440N printer/fax/scanner.

  When I go into the Windows Fax and Scan menu, I'm going to Fax > tools > accounts Fax. Then I select 'Add '. When he asks, I then select "Connect to a fax on my network server." But I don't know the name of my printer/fax/scanner when he asks "Type the fax server location."
  How to find the name?
  Help, please! Thank you!

  Hello

  You can include the MFC-7440 printer named fax in the \\IP addressname of \\Printer' and check.

• Acrobat 9.5.5 stops when you try to scan to PDF on a Mac running OS 10.11.2 Scanner/printer is Brother MFC 5890. Usually works for a single analysis after the reboot.

  Acrobat 9.5.5 stops when you try to scan in PDF on Mac running OS10.11.2. Using the scanner/printer Brother MFC5890. Error message generated and sent to Apple. After restart Acrobat, will travel to the format PDF once, and then repeats a dysfunction until you restart again. Is there a solution? No Adobe updates available.

  Hi ronaldw43846300,

  Acrobat 9 is not compatible with Mac OS 10.11 Adobe Acrobat system requirements, please use the application in a consistent environment to make Acrobat work properly.

  Kind regards
  Nicos

• Install our Printer Brother MFC - 885CW printer USB

  We tried to install our printer model Brother # MFC - 885CW USB printer on our machine for much of the day, but we have not had any luck.  If you have any suggestions, please let us know!  Sincerely, your friends at Iowa City, Iowa - Connie and Bob Richards.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Windows 7, scanner and printer Brother

  Greetings. I just installed Windows 7 (32 bit) on my dad's laptop computer. When I installed the software for the printer Brother MFC-8840 D, Windows told me that the software was not compatible. Checked the Brother's Web site and indeed, the Brother MFC Pro Suite software is NOT compatible with Windows 7. No problem, always installed Windows driver scanner and I can scan with the device. However, the files created are in TIF format. Windows allows for the economy in several formats, including TIF. Is it possible to configure the analysis feature in Windows to save a PDF file?

  Depending on your software PDF Creator, if I want to scan to PDF, I simply open Acrobat, click file, create a file, scan and it will.

• Is the corded handset on the Brother MFC-795CW & it can record calls?

  Printer multifunction Brother MFC-795CW.

  Brother MFC-795CW all-in-one printer - is the combined connection hard wired or plug wire & can record the calls of the machine?

  Here you can find the characteristics of devices: http://www.brother-usa.com/mfc/modeldetail.aspx?PRODUCTID=MFC795CW

• How can I use my Brother MFC-5440CN printer in Windows 7?

  How can I use my Brother MFC-5440CN printer in Windows 7?

  Download the vista driver and software package complete withhttp://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html?reg=us&c=us&lang=en&prod=mfc5440cn_all&dlid=&flang=English&os=74&type2=-1

  Be sure to only install the driver before connecting the printer.

• Scan multiple pages to a pdf file using Windows Fax & Scan and a Brother MFC-7420 8

  When I try a new scan with the charger (one side of scan) selected, the scanner makes each page in a separate file which is read by the photo rather than Adobe software.  In addition, the Brother scanner has been reset so that it will no longer scan multiple pages into a single file using my brother responsible program in my old computer with Windows 7.  How can I back to simple B & W scan multiple pages into a single Adobe pdf?  Thank you

  Hello Norman,

  I would suggest trying the following steps and check if it helps:

  Scanning from the charger:

  Step 1: Click on the 'Start' button on your desktop and type 'brother' in the search field. Point to the name of your MFC and select "ControlCenterx" (where "x" is a number one digit) to load the ControlCenter application in the system tray to the left of the clock on your taskbar. Double-click the "ControlCenter" icon in the system tray.

  Step 2: Click on "Configuration" and select "Scan". Select 'File' as the type of scan to open the scan to the Configuration window.

  Step 3: Go to the 'Touch' tab and choose "PDF (*.)" (PDF),"" # no multi-page Tiff compressed (*.) " (TIF)"or" # Tablet multi-page Tiff (*.) " (TIF)"under File Types, as these types of files allow analyses of several pages.

  Step 4: Place the entire document in the ADF on the scanner and press the button "Scan" of the machine. Press the 'Arrow' key to select 'File' and press 'OK '. Press the button 'Start' to scan to a single document.

  Scan of the glass:

  Step 1: Lift the cover of the document on the Brother MFC, place the first page face down on the glass and close the lid.

  Step 2: Click the 'Start' button on the computer and in the search box, type "scansoft. "ScanSoft PaperPort" and select "PaperPort."

  Step 3: Select the Brother MFC as the scanner, and then select a profile, such as "B & W Document". Click on "search".

  Step 4: Remove the glass on the first page after that latter was analyzed and place the second page on the glass. Close the lid and click the button "Scan more Pages.

  Step 5: Browse all pages in the document one at a time. When you are finished, click the Finish"" button.

  Hope this helps, simply reply to get help on Windows.

• Printer E2000 and Brother MFC - 9330 CDW problem?

  I have a router E2000, which I think is hard to connect to / wake my printer Brother MFC - 9330 CDW.  I attributed to a static IP address and when I run the network status of the LCD of the printer it is said that it is connected to my network and everything is correct.  But I can't ping from my Windows 7 computer, which is connected to the same WLAN.

  I can also print using my phone, connected on the WLAN, using the Brother printer app so maybe that's not the E2000. I don't know if it access the printer just like my pc.

  But if I reboot the E2000, my Win 7 machine can connect to the printer in a first time, but at some point - usually minutes but it may be days - the connection is lost and I can't seem to restore without having to reboot the router.  Restart the computer or the printer reset the connection.  The only way around this is to restart the router then immediately open Control Panel on the printer to my pc and let it open, maintain a connection with the printer, which is obviously not very convenient.

  I tried to reinstall the firmware for the router, which is the latest version, and I also have the latest firmware installed on the printer.  I also removed and then reinstalled the printer several times in my control panel when you add a printer.

  I'm not that techy, so I know what else to try.  If anyone has any suggestions I would really appreciate it.

  Thank you.

  I recommend that you connect the printer to the router with an Ethernet cable. The IMO is always the most reliable connection for network printers. The mobile application can directly connect to the broadcast wireless to the printer without going through the router all together.

• Problem install driver Brother MFC 8300 (using Windows Update)

  I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit.  I had to reinstall due to a CMOS error, I think it was because of a dead battery.  It could even be something else because I had other problems with this facility (explained below).  In any case, the printer is a former Brother MFC 8300 (he was a workaholic!).  Past times, I have re-installed Windows, there have not been any problems with this printer.  I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager).  But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does).  FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner.  Don't know what that means.

  I also tried to manually download the driver of 'catalog.update.microsoft.com '.  I downloaded 2 different versions of the driver.  It has a size of 2.0 MB file and the other has a 2.3 MB file size.  I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand -F: * " ."  I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).

  I am running as a "Standard user", but I installed all the drivers of devices as an administrator.  I also noticed a problem with an application that I used before this re - install, "Ultracopier.  On installs previous he has installed fine and he demanded 'Administrator' rights after the start.  But during this installation, it did not work at all and did not 'Administrator' rights after the start.  I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders.  I don't know if any of this matters but I thought that the more information the better.

  I hope someone can help me with this because I really need this printer to work.

  Hello

  Sorry for the late reply.

  I suggest that you restart the Printer Spooler service and see if that fixes the problem.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform the following steps:

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.

  To install optional updates, follow the steps below:

  1. Press the Windows key + R
  2. Type wuapp
  3. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
  4. If updates are found, click on view available updates.
  5. Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Hope this helps, get back to us if you need further assistance for Windows.

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• The behavior of copy (.png files) screen when using TextEdit and printing

  I have long used the method to copy and paste texts and/or pictures to TextEdit and print files .rtf or .rtfd below:

  I use the command-control-shift-4 and the cursor to select things and paste into TextEdit.

  That stopped working in the Sierra.  I tried several methods (PDF format conversion, fall in Pages and Numbers, for example), but nothing worked: the Canon PIXMA MX922 printed on a white sheet and left the box of small characters with text "filter impossible."

  There is no new printer driver on the Canon site; However, there is a new driver IJ Scan Utility and I downloaded it already after that installation of Sierra and the scanner works fine, as also directly print something (e.g. on the Web).

  Now, after several days of testing and I was wondering, I tried this yesterday:

  Instead of the above command, I used (which I do when I want to save it to the desktop) command + shift + 4.  I copied the file .png from office, dropped in the TextEdit, printed, and... IT WORKED.

  Copy and leaving fall directly in the TextEdit and printing, is so not working, but let fall the same screenshot on the desktop and copy and paste into TextEdit and it print shops.

  I noticed several other annoying problems to Sierra, some I've reported here (communities), some didn't.  Business-as-usual: first version of an upgrade is full of bugs, which 'disappear' in future versions, until a new update is made available, the loop continues, continues, and...

  He works here.

• HPLaserJet pro mfp m125nw: Smartphones using scanning and printing

  Hello

  I want to buy a printer hp laserjet mfp m125nw pro. But I want to know is - it possible to use android and iOs smartphones to connect to this device for scanning and printing files? If so, how can I do? Is there any application to do this? This device has an internal ethernet and wireless adapter?

  Thank you

  Hello

  Your printer supports AirPrint and ePrint:

  http://support.HP.com/us-en/document/c04086790

  You can print and scan using few applications especially HP AIO Printer Remote app, print and scan as long as your printer and other devices are on an SAME network. Please use Apple Store or Google Store/game to install the application above and you can use this application to scan (and print).

  Kind regards.

• I can't on my Brother MFC-9325CW printer - everything comes back as a mistake and remains in the queue

  I installed my printer Brother MFC-9325CW, and it will not be printed.  Whenever I send a document to the printer, it reads like a mistake and remains in the queue as an error.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to obtain the windows user name and print it in Doc. HTML using ASP?

  Hello..

  I have a network that is content AD and page Intranet Small
  I want to display the welcome message when the user opens this page
  the message will be "welcome % unsername %.
  username = the logged in (for windows) user name
  But how to get and print the username in HTML using ASP?

  Hey hammad T. Fakhouri,.

  The question you posted would be better suited in the Asp.net Forums. I would recommend posting your query in the Asp.net Forums.

  http://forums.ASP.NET/