IPCC IVR with SQL Server 2005
Has anyone tried this before? It work? I know that SQL 2000 is officially supported, but the customer is 2005. Use 4.0 (5) of the IPCC.
Yes, that I extracted data from the SQL Server 2005 database with no problems.
Hope this helps,
Juan Luis
(Please, note the useful messages ;-))
Tags: Cisco Support
Similar Questions
-
DG4MSQL v11.2.0.1 certified with Sql Server 2005 Express Edition?
We are working on a proof of concept and to do database gateway for MS Sql Server - DG4MSQL version 11.2 - Oracle on 64-bit Linux to connect to a Windows database that uses SQL Server 2005 Express Edition. I have reviewed the matrix certification for database gateways and it indicates that SQL Server 2005 is certified - but does not specify what editions.
We have some problems to connect to the SQL Server database and want to make sure that we should be able to connect to the express edition.
Thank you.Yes, DG4MSQL 11 is certified with SQL Server Express Edition.
-
TOTALLY CONFUSED with SQL Server 2005
Hello world
I'm just installed SQL Server 2005, I use Coldfusion MX 7.0.2 with all his patches, and I'm still without any source of data connected to MSSQL2k5
I used the traditional way to create the data source using the embeded Microsoft SQL Server driver has put accurate data on the fields and the error message was as follows:
Connection verification failed for data source: recofoce21
java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] error socket creation. Connection refused: connect
The root cause was that: java.sql.SQLException: error [Macromedia] [SQLServer JDBC Driver] socket creation. Connection refused: connect
Then I read that Microsoft has released a JDBC driver, I installed on ColdFusion mentioned in this technical note:
ACTIVE http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=ded4216b
I have create a new source of data as the example shown and NOTHING:
Connection verification failed for data source: redcofoce
com.microsoft.sqlserver.jdbc.SQLServerException: welcome the al ha Fall TCP/IP connection. java.net.ConnectException: connection refused: connect
The root cause was that: com.microsoft.sqlserver.jdbc.SQLServerException: welcome the al ha Fall TCP/IP connection. java.net.ConnectException: connection refused: connect
In other forums read is perhaps the type of authentication used, my authentication is "SQL authentication" WTF!
My TCP/IP is enabled VIA ENABLED, active too PIPE
Please give me a ray of light!
Another thing you can do is to check the database listens on port 1433. Go to the Network Configuration on the tab General properties for the database. Select TCP/IP and click on properties...
Ted Zimmerman
-
Installation of ODI with SQL Server 2005
Hello
I try to install ODI with MS Sql Server 2005.
I created a database in Sql Server and created a user with rights to connect to the database db_owner.
While trying to install master repository, I selected Sql Server with the following details
Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver
URL: jdbc:microsoft:sqlserver: / / < myhostname >: 1433; SelectMethod = cursor
The repository not created in error:
* com.sunopsis.core.q: java.sql.SQLException: [Microsoft] [SQLServer 2000 for JDBC driver] [SQL Server] the new tabular data stream (TDS) procedure remote call (RPC) protocol stream is incorrect. Parameter 1 (""): data type 0 x 38 is unknown *.
Now, if I change the URL to jdbc:microsoft:sqlserver: / / < myhostname >: 1433, the repository is created successfully. But when you log in Repository Manager to the topology using the same basic shape, again invites me the same error.
Has anyone faced the same problem?Hello
You are using SQL server 2005 but try to connect by using SQL server connection details 2000 you should use
com.microsoft.sqlserver.jdbc.SQLServerDriver
JDBC:SQLServer://servername:1433; databaseName = DBNAME; SelectMethod = cursor
You must also make sure that you use the correct driver SQL server 2005, if you use a version of Java before 1.5 to ODI so you will need the JDBC SQL Server 2005 1.2 driver.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Driver JDBC SQL Server 2005 MS v1.1 and integrated authentication
In our setup we have MX 7 Standard running on Windows Server 2003 with SQL Server 2005 for a back-end database. The CF Server service runs under a specific domain account. Using the JDBC Microsoft SQL Server v1.1 driver, I am able to connect to the database by using a sql server connection and specifying the password. I would like to be able to use integrated security to connect to the DB, but I don't seem to be able to specify integrated security. Instead of the connection an error message on the username "is not valid.
Someone managed to connect to SQL Server 2005 with integrated security?To answer my own question...
Here's how I got it work.
1 set the cf service log in as domain user
2. take the sqljdbc.jar and sqljdbc_auth.dll files and place them in\runtime\lib
3 Add the java.library.path in the following of this directory
4. configure data source with the following parameters
URL JDBC: SqlServer: / /; databaseName = ; integratedSecurity = true;
Driver class: com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver name: SQLServerDriver
Username: empty
Password: emptyData sources, check and work correctly. I also update the drivers from datadirect as well so I don't know if that had anything to do with it either.
http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=42dcb10a
-
I have a Dell Vostro 420 - Windows XP. Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) failed to install several times with an error Code: 0xD59. Please help me understand this and get this installed!
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for SQL server support. Please post your question in the Sub forum.
Link: http://social.msdn.microsoft.com/Forums/en/sqlsetupandupgrade/threads
For reference: how to solve the packets missing MSI or MSP during SQL Server Service Packs, hotfixes or cumulative updates: http://support.microsoft.com/kb/2015100
-
Computer tried to install the automatic update for SQL Server 2005 pack 4 (KB2463332) fails with the 0xD59 error code
Hello Rich Boetsch,
Please ask your question in the forums SQL Server within TechNet they manipulate all server related issue.
See you soon
-
original title: SQL Server 2008
We have SQL Server 2005 cluster (3 node cluster) and if we improve this nodes to 2008 R2, can the databases associated with the named instance remain to the version of SQL Server 2005, I seem to disagree with this notion, but still need to validation of the pro.
One way I can think of to achieve this scenario changes the compatibility level to SQL Server 2005 when the node has been upgraded to SQL Server 2008, so we can upgrade databases to SQL 2008 as and when the vendors provide support for this version.
Hello
Here is the Vista forums
Try the links below:
SQL Server forums
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/
SQL Server TechCenter
http://TechNet.Microsoft.com/en-us/SQLServer/bb265254.aspx
Blogs and Forums SQL server 2008
http://www.Microsoft.com/sqlserver/2008/en/us/forums-blogs.aspx
-
Integration of SQL Server 2005 with OBIEE 11g
Dear gurus,
Is there documentation on how to use SQL Server 2005 as datasource combined with OBIEE 11 g?
Clear steps with pictures will be very useful.
Thank you very much
Concerning
JOEHello
Please see this link.
http://rnm1978.WordPress.com/2009/08/21/querying-SQL-Server-from-OBIEE-running-on-UNIX/
Re: How to connect Linux OBIEE repository to SQL Server 2005 database
Hope this helps
Thank you
Satya -
Selecting a SQL Server 2005 with names of long columns (>; 30 characters)
Hello
I was able to put in place a db Oracle 11.2.0.1 link to SQL Server 2005 using DG4ODBC.
My problem is that some column names in Sql Server are more than 30 tanks and trying to select gives me the ORA-00972: identifier is a mistake too long.
If I omit those select columns succeeds.
I know that I can create a view in sql server and query it instead of the original table, but I was wondering if there is a way to overcome it with sql.
My selection looks like this:
Thank youselect "good_column_name" from sometable@sqlserver_dblink -- this works select "good_column_name","very_long_column_name>30 chars" from sometable@sqlserver_dblink -- ORA-00972
No there is no other way then using a view in SQl Server and select in the view rather than the table. The reason is that the Oracle database has a restriction that the column names must be 30 or fewer characters.
-
I have problems installing Microsoft SQL server 2005 express edition service pack 3. When I use windows update Setup does not exceed 0% and crashes. I tried to download the service pack online. When I ran the installer, it crashes when you try to install SQL server database services.
Any help would be much appreciated.
Hello
Download SQL Server 2005 Express Edition Service Pack 3 from the link below:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=3181842A-4090-4431-ACDD-9A1C832E65A6&displaylang=enRestart the computer in safe mode.
http://www.computerhope.com/issues/chsafe.htm#03Install the update in safe mode and check.
Cheers and enjoy!
-
Database Move Virtual Center connected with ODBC to SQL 2005 server to another SQL server 2005
Is there any official document of VMware to move VC a server to other sql DB? I would like to move VC DB (connected by ODBC) to another SQl server 2005.
This article can be useful
-
SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster
We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...
Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS
Errors on the nodes:
SQLSetup0008_SQLNODE1_Core (Local)
Running: InstallSqlAction to the: 4/14/2012 22:56:39
Installation: sql on target: SQLNODE1
Waiting for remote setup (s) to prepare
Remote Setup (s) is ready
Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:
Source the name of the file: datastore\cachedpropertycollection.cpp
Compiler timestamp: Fri 29 Jul 01:13:49 2005
Function name: CachedPropertyCollection::findProperty
The source line number: 63
----------------------------------------------------------
Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.
Source the name of the file: datastore\packageidstatescopecollector.cpp
Compiler timestamp: Wed Aug 24 13:40:04 2005
Function name: PackageIdStateScopeCollector::collectProperty
The source line number: 115
----------------------------------------------------------
dataPathValue is empty
Cluster functionality detected: SQL_Engine
Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0
Source the name of the file: datastore\cachedpropertycollection.cpp
Compiler timestamp: Fri 29 Jul 01:13:49 2005
Function name: CachedPropertyCollection::findProperty
The source line number: 130
----------------------------------------------------------
Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache
Source the name of the file: datastore\cachedpropertycollection.cpp
Compiler timestamp: Fri 29 Jul 01:13:49 2005
Function name: VirtualServerInfo.IPResources
The source line number: 113
----------------------------------------------------------
Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}
Transact package threw an exception.
Error code: 0x8007000d (13)
Windows error text: these data are incorrect.
Source the name of the file: sqlchaining\highlyavailablepackage.cpp
Compiler timestamp: Mon Aug 29 01:18:42 2005
Function name: sqls::HighlyAvailablePackage:manageVsResources
The source line number: 490
---- Context -----------------------------------------------
SQLs::HighlyAvailablePackage:preInstall
SQLs::HighlyAvailablePackage:manageVsResources
m_dataDirPath is empty
Cluster API threw an exception during operations of virtualization.
Package first notify: 13
Error code: 0x8007000d (13)
Windows error text: these data are incorrect.
Source the name of the file: sqlchaining\highlyavailablepackage.cpp
Compiler timestamp: Mon Aug 29 01:18:42 2005
Function name: sqls::HighlyAvailablePackage:manageVsResources
The source line number: 490
---- Context -----------------------------------------------
SQLs::HighlyAvailablePackage:preInstall
SQLs::HighlyAvailablePackage:manageVsResources
m_dataDirPath is empty
Cluster API threw an exception during operations of virtualization.
SQLSetup0008_SQLNODE2_Core (Local)
Local configuration can complement
Running: InstallSqlAction at: 4/2012/14 23:23:57
Installation: sql on target: SQLNODE2
Informs the package is ready to start: 0
Waiting for notification start installation
Local configuration can begin installation
Error code: 0x8007000d (13)
Windows error text: these data are incorrect.
Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp
Compiler timestamp: Wed Aug 24 13:40:17 2005
Function name: sqls::RemotePackageInstallerSynch:preInstall
The source line number: 128
---- Context -----------------------------------------------
SQLs::InstallPackageAction: perform
SQLs::RemotePackageInstallerSynch:preInstall
Abandonment of the package: "sql", due to an error from the configuration of the host: 13
Notify all ready to commit: 13
Notify all ready to put end to: 13
Waiting for notification complete installation
Local configuration can complement
Packaging return code: 13
Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false
Error: The 'InstallSqlAction' Action failed during execution. Error during execution information:
Target collection includes the local machine.
-----------------------------------------------
Error: The 'UninstallForRS2000Action' Action failed during execution. Error during execution information:
Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:
The condition 'rs has been correctly upgraded level.' returned false.
Package installation: 'patchRS2000' failed due to a precondition.
Running: ReportChainingResults at: 4/2012/14 23:24:1
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages could not be installed. See logs for details of the error. : 13
Error code: 0x8007000d (13)
Windows error text: these data are incorrect.
Source the name of the file: sqlchaining\sqlchainingactions.cpp
Compiler timestamp: 1 Thu Sep 22:23:05 2005
Name of the function: sqls::ReportChainingResults: perform
The source line number: 3097
Please notify.
Assani
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923
Hope this information helps.
-
Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) is not installed
I tried several times to install this update.
When I manually downloaded and tried to install told me that it's incompatible with my version of windows I'm running widows 7 Home premium
32 bit... any help woul appreciatedMicrosoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)
Installation status: failed
Error details: Code 42 b
Try posting in the SQL Server Setup & Upgrade forum for assistance:http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/>
-
Error code: 0x65B try installing Windows SQL Server 2005 Service Pack 4 (KB2463332)
I'm running Windows XP Professional... for some reason that I can't install the new update for SQL Server 2005 window, SP4.
What I am doing wrong?
Thank you... Barb
Try the experts here:
SQL Installation of Server & upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.
Maybe you are looking for
-
Which Mac for daily browsing?
What Mac is the best option for navigation on the web every day and reliability? I want something that will last a while but won't break the Bank. I am currently looking for the Macbook, Macbook Air, and Macbook Pro. Thank you for your help.
-
Hi, am new to the forum. I have the reader above, and while it reads DVD pressed without problems, he struggles to read and access my own written records. Some discs, DVD - R written on the same game machine very well, others do not read. The same di
-
Re: Where can I find drivers XP for Satellite L40 - 13 G PSL40E
Please help me, where can I find drivers for L40 - 13G (PSL40E) for Windows XP? In the http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU serviceI have found that the 'Installation Instructions' with WinXP
-
sync iPhone iTunes 5 10.7
I know this has been covered before, and some of the solutions are beyond my reach. The hope of new lights on the way to get my iphone 5 recognized by itunes 10.7 running windows 7. iPhone is running ios9.1 and the computer will recognize the iphon
-
OK so I bought my first day of 1The xbox as it left, it was great until about 2 months ago then he decided to stop well enough to connect to my internet, it would not disconnect but my download speed went from 25-30mbps less than 1, so I called my IS