Tecra 8100 DVD - ROM SD-C2402

Similar Questions

• Re: Tecra 8100: CD-Rom does not - W2k cannot load drivers

  Hello

  I have Windows 2000 on my Tecra 8100. For two days, my cd-rom doesn't work anymore, because Windows cannot load one or more drivers.
  I did nothing special, except a game and using word and excel.

  Anyone got a solution for the problem, because I do not know much about computers.

  Additional info:
  Windows 2000 SP3

  CD-ROM:
  TEAC-CD224E-BA

  Kind regards

  Martijn

  Hello

  Sorry, but it will help get more info on CD/DVD drive.
  Optical drive is listed in Windows Explorer?
  What is the status in Device Manager?

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• Problem with DVD - ROM SD-C2402 (DVD multisession)

  Hello

  I have the following problem: I recorded a DVD in different stages (multisession) with Nero 6, but I can read only the first session on my laptop (Windows 98SE). On the other hand, I have no problem with multisessions CD

  Could you help me in this case?

  Thank you

  John

  Hello

  I m not 100% sure, but I think that it s a problem with the burning software and/or the media. I found information there are many problems with playback of the files after burning the multisession DVD-R, + R (Win98SE). In my opinion, you should try to burn DVDs on media RW multisession.

  Good bye

• Tecra 8100: Which compatible burner CD or Combo (master/slave-settings)?

  I want to replace the internal Tecra 8100 DVD - ROM (SelectBay) against player
  a CD - RW or DVD-Combo-Drive. Which models are compatible with the Tecra 8100
  SelectBay?
  I heard that the drive MUST be in Master mode to be able to work
  with the Tecra 8100 (and most of this type of disc is delivered in slave
  setting the operating mode)?

  Thank you all in advance for the answers!

  Hello

  I put t know what parameters should support compatible readers, but I found several compatible devices:

  Drive drive TEAC CD-224th-B30 CD-ROM and DVD - ROM Toshiba SD-C2302

  Additional I found this site which drive CDRW Toshiba compatible for Tecra 8100
  http://www.getpartsonline.com/za2295p02.html

• Tecra 8100 - no sound except in mic!

  I have a Tecra 8100 Windows XP.

  I can't get sound on the speakers or the headphones emitted by the computer, such as beeps, CD, etc. But if I have to reactivate the microphone, I can hear through the headset, ensure that the microphone picks up (there are a few comments without microphones, proving that the speakers work physically). All volume controls are the maximum and reactivated. All devices are enabled and correctly selected in sound control panels.

  Any help would be welcome! Is the sound card, or am I missing a driver? Could not find anything else on the web with similar symptoms. Thanks in advance.

  Here is the summary of the Everest report:

  Value of the field
  Computer
  Type of computer Advanced Configuration and Power Interface (ACPI) PC (Mobile)
  Microsoft Windows XP Professional operating system
  Operating system Service Pack [TRIAL VERSION]
  Internet Explorer 6.0.2600.0000 (IE 6.0 - Windows XP)
  DirectX 4.08.01.0810 (DirectX 8.1)
  Computer name TECRA-8100 (Tecra 8100)
  User name of the user General information
  Connection domain [TRIAL VERSION]
  Date / time 2009-07-15 / 14:18

  Motherboard
  Type of processor Mobile Intel Pentium III, 500 MHz (5 x 100)
  Name of TOSHIBA Portable PC motherboard
  Motherboard Chipset Intel 82440BX/ZX
  Memory system [TRIAL VERSION]
  Type of BIOS Toshiba (12/30/99)
  Communication communication Port (COM1) port
  Communication Port (LPT1) ECP Printer Port

  Display
  Video card S3 Graphics Inc., SavageMX (8 MB)
  Video card S3 Graphics Inc., SavageMX (8 MB)
  S3 Savage/MX (86 270) 3D accelerator
  Generic TV monitor
  Inner cover of Toshiba monitor 1024 x 768

  Multimedia
  Yamaha Native DS1 Audio CODEC audio adapter

  Storage
  Controller IDE Intel(r) 82371AB/EB PCI Bus Master IDE Controller
  Floppy Drive floppy disk drive
  Hard drive IBM-DARA-212000 (11 GB, 4200 RPM, Ultra-ATA/66)
  Optical drive TOSHIBA DVD - ROM SD-C2402 (8 x / 24 x DVD-ROM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) [TRIAL VERSION]
  Total size [TRIAL VERSION]

  Entry
  Keyboard Standard 101/102-key or Microsoft Natural PS/2 keyboard
  Mouse HID-compliant mouse
  Mouse PS/2 Compatible Mouse

  Network
  IP main [TRIAL VERSION]
  00-10-A4-E1-F9-30 main MAC address
  Network card Xircom CardBus Ethernet II 10/100
  Modem TOSHIBA Internal V.90 Modem

  Devices
  Epson ActionLaser 1100 printer
  HP DeskJet 540 printer
  Infrared controller Infrared Port
  USB1 controller Intel 82371AB/EB PIIX4 - USB host controller
  USB device USB Human Interface Device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version Version 2.30
  TOSHIBA DMI system manufacturer
  DMI system product laptop
  DMI system Version Version 1.0
  DMI serial number of the system [TRIAL VERSION]
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product laptop
  DMI Motherboard Version Version A0
  DMI serial number motherboard [TRIAL VERSION]
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version Version 1.0
  DMI serial number of chassis [TRIAL VERSION]
  DMI chassis [TRIAL VERSION] inventory number
  DMI chassis Type Notebook
  Total memory / free DMI casings 2 / 0

  Hello

  A good questions and I never heard of this topic which s...

  I think the fist, you should start to update the audio driver of your laptop. Therefore, you can see the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing the latest version, you must remove the old version first and reboot the laptop.

  Maybe a reinstall of Windows with the Toshiba recovery disc could also be useful and in the worst case, it s only a hardware malfunction and it must swap the motherboard. :(

  Welcome them

• Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

  1. I have a 500 MHz processor on my 8100. I would like to upgrade to maximum capacity. I think it's 800 MHz since it is the highest, the series went to.
  But if it's 800 MHz, any Mobile PIII on this frequency do? Or should I check for special settings of the processor?

  2. I don't have a floppy, or ways to get drive one. And I'm not going to ebay one just for an update of the BIOS. Any ideas? A bootable CD with the files will do?

  3. What is the location of the DVD-ROM and what alternative models can I use? The 8200 went up to 8 x DVD - RW. Could I go further?

  Thank you. I hope that my post is OK like this instead of three different positions.

  1 take a look at the other Tecra 8100 models to determine which processors are compatible.

  2. I don't think that would work a bootable CD, you must follow a special procedure to update the BIOS and requires a floppy drive. If there is a version of Windows, you must use that instead.

  3 upgrade the DVD player can be difficult because you must use the correct master/slave settings, and it must have the same design of the façade of the original.

  Personally, I'm selling the laptop and buy a second hand faster one. It can work out to be cheaper.

• Need drive combo CD-RW/DVD-ROM for Tecra 8200

  I just bought an old Tecra 8200 with a CD-Rom drive in the SelectBay.
  I would change to a CD-RW/DVD-ROM combo drive.
  Could someone let me know the correct for this combo drive model number please?

  Best wishes

  Michael

  How about this:

  * PA3073E - 1 CD 2 *.
  4 x CD - R, 4 x CD - RW, CD-ROM 24 x, 6 x DVD-ROM

  and it supports this media:
  (Read/write) CD - R, CD - RW (read, re-writing), CD-ROM, DVD-ROM, DVD - R (read only), DVD - RW (read only)

  Greetings

• Tecra 8100: Video-playing DVDs only with jerking / glisten under W2K

  I can't play a normal DVD on my Tecra 8100 (P3 600 MHz, 256 MB RAM, Windows 2000 with SP4)
  without convulsions. Already have try to copy the image of the DVD on the HARD drive and play directly from the
  HDD - same result. Therefore, it is NOT a problem with the DVD drive, may be a problem
  with the S3 S3 Savage/MX VGA-Cardinal display driver integrated V installed 5.12.1.7002.
  Tested with PowerDVD 6 and VLC media player. Any special DVD playback software for the
  8100 available? Please help, try several hours to solve this problem, already
  talk with toshiba customer service!

  Hello

  Well, the Tecra 8100 is not a high-performance notebook and maybe it is not generally possible to watch DVDs jerking-free s.

  But I think you should check several parameters before we abandon ;)
  In order to check if DMA and not PIO mode is available and updated on the IDE controllers.

  Check if you have installed the latest version of DirectX.
  You said that you are using the latest version of the graphics driver. Well perhaps you will check this site:
  http://www.S3graphics.com/en/resources/drivers/legacy/software_archive.jsp#id_290298drv

  Also check if the installation of some codex will help you:
  http://www.DivX-Digest.com/software/nimo_pack.html

  The Nimo Codec Pack is a nice collection

• The Tecra 8100 with a CD - RW or a dvd upgrade

  Hello
  I'm a bit of a beginner, but I hope it's a simple question - can I put my tecra 8100 with a CD - RW, or combo dvd cdrw drive? I think I've read enough to know about changing caddies & Hubcaps etc - I don't know which drive would work - SD-R2102?
  Any help gratefully received. !

  Concerning

  Tony

  I also have a toshiba tecra 8100 and I use the cdw/dvd toshiba sd-r2612 and its perfect works
  I can play the dvd movie and burn cd

  Greetings
  RAF

• Tecra A3: I have CD-RW/DVD - ROM-> I want to have a CD/DVD-RW

  I have a CD-RW/DVD-ROM drive in my Tecra A3 machine. I want to have the installation of CD/DVD-RW. internal or external.
  Any recommendations?

  Hello

  External device is certainly not a problem. You can connect using firewire or a USB connection. Internal solution I recommend you to check user for Tecra A3 on page 7 manuals. There, I hope that you will find all the info you need.

  Good bye

• Tecra 8100: Docking Station: Notebook reset when you try to burn DVDs

  System: Toshiba Tecra 8100 + Replicator port
  PA3017E + Expansion Station PA3018E,
  Samsung DVD Burner H552B (new firmware) built in (docking station).

  Problem: If I try to burn a dvd/CD, the system performs a hard reset and is inexplicable.

  What could be?

  Hello Stefan

  It's not easy to say why but maybe sometimes it s a burning question of the software?
  Have you tried using different burning software?
  I recommend to check if this problem occurs with different burning software.

  Best regards

• CD-ROM drive does not eject on Tecra 8100

  I have a Toshiba Tecra 8100 and my CD player will not eject. It only happens when it starts.
  Any ideas, everyone, how can I solve this problem?

  Even when I get it open habit run all disks?

  Hello

  You are not able to open the drive to be on the CD. Is this good?
  Generally, each player has a small hole to open the player manually. You can use a thin wire to open the player.
  But if the reader doesn t work correctly or t doesn't accept and recognize any CD so I guess the drive is dead and only replace the drive can solve it.

• Tecra M3 recovery DVD-ROM

  Hello

  I just bought a brand new M3 in Germany and unfortunately found out that the operating system and the restoration of DVD - ROM is both in German. I contacted the support hotline just to hear that, as I bought it in Germany I could only receive a replacement DVD in German (and no possibility for me to order the DVD in another language... :-( Does anyone on this forum knows how to receive the restoration of DVD - ROM in English

  Any advice is welcome

  Serge

  Hi Serge,

  I believe that the terms of licensing for versions of Windows XP OEM it avoid else that distributed in the original language.

  You can however buy a real English Microsoft Windows XP installation disc and install on your laptop, then you can download tools and utilities from the web site of Toshiba UK.

  HTH

• Tecra S1: CD-ROM/dvd-rom is now read-only

  Replaced broken unit of hard drive and OS changed from XP to 2000.
  Since then, the cd - dvd rom drive died while I used to be able to burn CDs... checked, but seems the drivers are fine. Any ideas?
  Thanks in advance.

  Hello

  It's very strange. As far as I know operating system or a specific HARD drive has no influence on the functionality of CD/DVD. It is interesting that if the drive is faulty, the engraving option has disappeared, but the reader can read the media without problem.

  If I remember correctly your unit a select drive from the Bay and if it is possible try to check with the other identical device.