IPhone 6 cannot wifi tethering for specific operator

Similar Questions

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.

  Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com

  Go to find my iphone and erase the phone.

• Cannot be stored in itunes, not enough access privileges for this operation

  Download the message saying that itunes cannot be saved. not enough access privileges for this operation

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• iPhone 4S gray WiFi outside

  Hey, if after a year of using my iPhone 4S my wifi on the device suddenly renounced me. Initially, it started randomly disconnecting from the current wifi network to which it was connected. That would happen rarely perhaps 1 to 3 times per month, but after a few months or so it would disconnect from the wireless network and lose their ability to find wifi networks. Which means that he could not find any wifi network until I rebooted the device. This continued for some time and was not really a problem because it happened from time to time. Then one day it has been disconnected from a wifi network and I rebooted the device. After the reboot it the wifi icon in the gray Control Panel. He had left the wifi symbol in thought and so I rebooted the unit again and it was fine. Now, it's happened quite regularly for a few days, until the icon completely turned grey. It has become a gray circle dark with nothing inside. No matter how many times I restart the wifi device does not light. I tried to force the reboot of the device, but that does not work, also I even reset all the network settings that do not work too. I erased all of the iTunes device and that he did not set too! This problem has also begun after that I updated the phone to IOS 9.0. I searched on the web for different types of solutions, but it is either the iPhone being heated by a hairdryer or being stored in the refrigerator for 30 minutes or more. I don't think that these are very good methods so please can someone help me solve this problem!

  PS: If a picture is needed I can provide that too

  Thanks for reading this and for your help.

  Hi Azman3456,

  You seem to have done most of the troubleshooting on your own. When you restore the device to factory settings, you set up as new, or did you restore your data from a backup?

  If you have restored it from a backup, I advise you to try to restore it again and set it up as new.

  When a device is restored to the factory settings and set up like new and the question comes up, it means that there is a hardware problem. You can go to your operator, an Apple Retail Store or Apple authorized Service provider depending on the country that you find, or call Apple to set up a repair with a delivery service if it is possible in your country.

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

• The iphone has WPS (WIFI) button? Because I really want an IPhone!

  The iphone has WPS (WIFI) button? Because I really want an IPhone!

  # IPhone is not compatible WPS to connect to Wifi networks. You must manually type the password for the Wifi network you want to connect to the iPhone.

• How attached iPhone off to USB host for charing only

  How attached iPhone off to USB host for charing only

  How attached a motorized iPhone to USB plug for battery charing

  without the phone starts in normal mode? The phone should simply keep turned off

  and only switch to the mode of charing on its data cable plug-in / original accessory load to the USB host.

  iPhone 6 s.

  You cannot charge an iPhone if it is turned off, because the charger is implemented on the software, which must be supplied to do its job. However, if you plug first, then turn to it it keep the charging circuit on and off the rest of the phone.

• Replacing the WIFI card for laptop G72

  Hi all

  I think that I have given up trying to fix my current card WiFi RALINK RT3090 because for some reason any it simply stopped working since last Thursday.

  Am looking to buy a replacement one but don't know with all these terminologies

  The repair, I found the sub elements:

  -Atheros AR9285 802.11b/g/n WiFi adapter 1 1 x
  -Module WLAN 802.11b/g/n 1 x 2 Intel Centrino Wireless - N 1000
  -Realtek RTL8191SE 802.11b/g/n 1 x 1 WiFi adapter (for 1.0 and 1.1 only models)
  -Adapter of WiFi 802.11b/g/n 1 x 1 Broadcom 4313
  -4313 Broadcom 802.11b/g/n WiFi 1 x 1 and 2070 Bluetooth 2.1 + adapter Combo BDU (BT3.0 + HS ready) (for models 1.1 and 1.2 only)
  -802.11b/g/n Ralink RT3090BC4 1 x 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter (BT3.0 + HS ready) (for models 1.1 and 1.2 only)

  All I'm looking for is something that connects with my router that is currently configured for 2.4 Ghz (can go up to 5 GHz but not looking for it) and get the best connectivity possible and if I choose to use my Smart TV with DLNA technology.

  Q1: Will all these above mentioned work card WLAN on my G72 (it is B02SA or B20SA) portable or can be picked up any other WLAN card (mini/low-profile if I'm not mistaken, that's what we call them)

  Q2: What is "for 1.0 and 1.1 only models"?

  Q3: Which of them will give me better speeds and possible connetivity?

  Q4: My previous card Ralink RT3090BC4 gave me several questions whenever I have to reinstall my OS so don't want the hassle

  Thanks to all in advance.

  souls33k3r wrote:
  Thanks a lot for the answer once for more erico.

  I'll keep your recommendation in mind.

  You would be so kind to answer my original question which will help me a lot

  Q1: Will all these above mentioned work card WLAN on my G72 (it is B02SA or B20SA) portable or can be picked up any other WLAN card (mini/low-profile if I'm not mistaken, that's what we call them). Check in the download section to check if the drivers are available. This nmeans that support BIOS is present.
  Q2: What is "for 1.0 and 1.1 only models"? It's information that can only be obtained at HP internally. It is likely to be market designations for models for the specific world regions. 
  Q3: Which of them will give me better speeds and possible connetivity? Module Intel uses the drivers Intel is more reliable.
  Q4: My previous card Ralink RT3090BC4 gave me several questions whenever I have to reinstall my OS so don't want the hassle. I also had problems with this module in the past. I prefer Intel and Realtek.

  You should consider browsing the forums on the sites of BIOS mod your laptop from warranty. There is a risk attached to the use of modded BIOS, you will have to accept. Modded BIOS files can remove blacklists of module.

• Cannot install drivers for HP photosmart C4640

  Try to install the drivers for HP Photosmart C4640 online I have no CD. After downloading, click on install and I have two such messages: the instruction at "0x7712153d" referenced memory at "0x77c623d8" memory can not be read.

  Second: this computer only has not the necessary software support USB to allow installation of the USB installation.the cannot continue until it is resolved.
  Action required: click Cancel to exit this software installation. To install this device as a USB key. Please consult your computer documentation or documentation of expansion card USB for more information on USB drivers. Please I need help.

  Of devices and printers, remove all installed drivers now for this printer. Unplug the printer from the computer. Reboot the computer. Access

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3831669#n191

  and download the appropriate drivers for your operating system. Install them according to the instructions. Do not connect the printer to the computer before trhe instructions or guests will tell you of the screen.

  Tom Ferguson

• When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

  I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

  * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

  The application-specific permission settings do not authorization for the application server COM with the CLSID
  {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
  the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_comp_exp.mspx?mfr=true

  In the opposite case

  http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

  http://TechNet.Microsoft.com/en-us/network/bb545879

  http://www.blackviper.com/wiki/Network_Access_Protection_Agent

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Can someone help me with the error message C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?

  Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;

   C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
  
  
  I use Vista Home premium 32-bit.
  Cheers, Rob.

  Hi robgrimes

   

  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

   

  I hope this helps.

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.