iPhone 6 s the ear speaker volume is low
iPhone 6 s the ear speaker volume is low, I turned the volume all the way to the top and there is still no improvement and the volume of the phone's normal when on a call by speaker and earpods. Problem volume level is only known when using the earphone.
Hello
Follow the steps here:
Tags: iPhone
Similar Questions
-
Does anyone else have a problem with the left speaker is much lower than the right?
Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?
Hello, TopDog16!
Welcome to congratulations on getting a new iPhone and Apple support communities 7. From what I see in your post, you have any questions on the stereo speakers in your new iPhone. I would be happy to help you with that!
Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning). The holes on the right are only speaker on this edge of the phone, however. The other speaker in the pair is at the top of the phone, where the cut is, just above the screen. Check here to see if sound comes out.
This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications
Have a great rest of your week!
-
The VPCEA36FM speaker volume (or lack of)
I love this laptop and I knew from reading several reviews online before I bought it which the built output of speakers left to be desired. I googled looking for a solution, but I have not found anything.
Y at - it a driver update that may resolve this problem?
I know the edge speakers will be limited output (like any laptop), but comparing my new Sony to other laptops, I know I should have substantially more.
Please, do not respond by telling me to use the volume down control on the left of my system tray or go to the control panel to do essentially the same thing. I'm sure that the solution is more detailed than that.
Thank you.
Thank you for taking the time to answer. Could you please tell me where this subject has been discussed before. As I said I tried
Google and I also tried searching this forum. I wish to refer to this topic in the future where a solution is found. I can't imagine I'm the only one who is disappointed by this problem.Thank you
-
Bought the Sbh54 at Christmas that I've owned the sbh52 previously and wanted an upgrade for my Z5p.
The problem I have is that the "speaker" is not very strong in all. I rarely hear the ringing of the thing and forget about its use for hands-free because it sounds like people are whispering from across the room.Everyone knows this or is my defective unit?
The sbh52 was much stronger when using the speakerphone. This seems to be let down for me.This is because SBH54 doesn't have this function in a voice high free hand / speaker
It's the same for the BRH10, that has the hand free call, but you cannot use it as a mini speaker for listening to music like SBH52
To summarize
SBH52 = free hand + loudspeaker
SBH54 = none
BRH10 = hand free calls
-
Why is my speaker volume so low?
Aspire S3-391-9606
Windows 7HP
Audio driver: Microsoft 'High definition' 6.1.7601.17514
This is a great ultraportable computer, but the output volume of the built-in speakers is much too low for normal use. I am forced to use an external Bluetooth speaker, clip - on speakers or headphones.
Output volume of my Android smartphone is by FAR stronger and clearer than the output of the computer.
I don't need loyalty (to the music), but for the speech must have more volume with reasonable clarity.
??
Drivers Realtek helped a lot.
But I discovered that DOLBY has been disabled. I activated that and made adjustments. His is much better now, but I would like to though stronger...
Thank you
-
iOS 10 no sound from the speaker of the ear or EarPods
After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.
Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.
Hello Billy78GR,
Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.
First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
Restart your iPhone, iPad or iPod touch
As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhoneHave a great day!
-
The speaker inside my iPhone seems to be blown out and smothered. The quality is low and seems to not be as strong as before. Are there ways to solve this problem or replace the speaker inside the phone?
< object edited by host >
Try troubleshooting help here > If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support
If nothing helps, check your warranty coverage > https://checkcoverage.apple.com
The iPhone may need repair > repair - official Apple iPhone Support
-
Is it normal that the screen SE iPhone packed between the vibration switch and the positive volume button?
If it was the impact, where the screen would break. It is normal for a screen to break at the point of impact.
-
I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!
See if there is an indicator of Contact liquid on your iPhone > liquid for iPhone or iPod is not covered by the warranty
-
Original title: the headphone volume
How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear
Hello1. who is the operating system installed on the computer?
2. What is the brand and model of headphones?
3A this works much earlier?
4. What is the brand and model of the sound card?5. have you ever tried to play the Audio using different media player applications and check?6. have you tried to connect the headset to another computer or phone and check if it works well?I suggest you follow these methods and check.Method 1: Run the audio troubleshooter.Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience storeMethod 2: Set the earpiece/microphone as default device and check.a. right click on the volume icon in the system tray at the right corner on the desktop.b. Select the playback device, go to torecording tab.c. make a right click and headphone/microphone as the default device.d. click on apply and ok.If above steps fails, proceed to method 3.Method 3: I suggest to disable the improvements and check.a. right-click on the icon "speaker" at the bottom right of the screen.b. Select "playback devices".c. right-click on the helmet.d. Select Propertiese. click improvementsf. check Disable all improvementsg. click OKYou can read this article for more information:Tips for solving common audio problems
You can also contact the manufacturer of headphones and check.I hope this helps! -
does not not all his sound and the device very bad speaker volume if not possible you help thank you
Send OR you notice once more and I look forward to you helps maybe not possible with this problem-not working not not everyone - his device speaker volume and sound. Thank you
dHello
· Have you tried the steps provided by Rob.C in this thread?
· You receive an error message or error code?
Please, try the steps indicated by the Rob.C of your previous thread and I would also ask you do not to create duplicate threads. This will not help you to get the instant solution to the issue that you are facing.
Let us know the results so that we offer in addition to the steps to solve the problem of troubleshooting.
-
Original title: his help.
My mom accidentally deleted something out of xp where the small speaker for the volume control icon has disappeared. So speaking I have no sound.any ideas on how to get my computer back to audio playback?I don't know if this will help, but my computer is a DELL optiplex gx620Hello
See the link below to bring the volume or its icon in the Windows taskbar.
Volume icon is not displayed in the notification area, and you may receive an error message when you try to add
http://support.Microsoft.com/kb/319095
Also, check the link below to fix problem with no sound in Windows XP.
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
-
Win XP - only allowing multimedia controls access the speaker volume
Hi I run Windows XP and the issue I'm having is that my media controls on my keyboard control as well for my speakers in windows and the volume for my speakers of headphones. There is no option in the software SetPoint for my keyboard Logitech to make only stick to the speaker volume. Is it possible to avoid this? I'd like have essentially what I did before, my media controls only control the levels of volume for my speakers. I only use the headphones for Ventrilo and it was plug-and-play w / no driver, so there is no option so there to prevent it from appearing in the Advanced Sound options in a drop-down list. Thanks for any help
Hello
1. which speakers are set as the default speaker to your Windows XP computer?
http://www.Logitech.com/support-downloadsI hope this helps.
-
How to increase the speaker volume?
Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?
On Wednesday, April 10, 2013 23:21:42 + 0000, JRHoot wrote:
Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?
Have you set the physical volume on the speakers control
themselves?Ken Blake
-
The Smartphones blackBerry speaker volume
Help, I have problems with my speaker volume when on the phone. I turned upward all the way, and I can barely hear the other person. The sound of the keyboard is normal when I push the buttons, but I can't hear the other person or voicemail via the speaker. The speakers work very well for the songs. Any thoughts?
Give a soft reset to your BlackBerry by removing the battery for 30 sec. If that does not solve the problem then consider a device software reinstall or upgradation.
Maybe you are looking for
-
HP Photosmart 7525: Unable to print from iPhone 5 since the evolution of routers
iPhone 5 Printer HP Photosmart 7525 We bought a new router and when it was installed, I cannot print from my iPhone 5. My phone is set up on the new WiFi router. I guess the signal to the printer is going through the router. I don't really know. I ne
-
Collective responsibility / duty cycle in DIAdem calculation
It's probably pretty simple to do, but still I only got halfway there, I could use some help! Basically I have a tree of torque and speed of files datalog, where I want to extract an array of number of revolutions of the tree to discreet couple level
-
Coade error 80073712 and my computer restarted on its own farm just down
everytime I try to upgrade my vista, I get an error code 80073712 that my computer was also stop randomly and the only way to restart if I keep trying to turn it on and as soon as I get it turn on it starts in safe mode can someone help before he end
-
[Error number: 0 x 80070424]
I get this error message on my laptop. How should I do? Ive tried everything, help help help
-
I created a file in wordpad and can not download it on a USB key since it is write protected. How to unprotect the files?