iPhone 6s more wakes up with the movement
After iOS 10.0.1 upgrade, my iPhone 6 s more wakes up with the movement. I use my iPhone in a cradle on my bike. When I hit bumps it wake up which is very distracting! He has never done this before. Is there a way to disable this feature?
Shabby,
Select settings > display and brightness > "Raise to Wake" out
Tags: iPhone
Similar Questions
-
firmware for the iPhone bluetooth headset original work with the 5s iPhone
Hello to our community,
I have a beautiful original apple iPhone Bluetooth Headset model n °: A1221
This helmet does not work correctly.
When I connect the headphones to the computer (iMac 27 "mid-2011, el Capitan 10.11.3) with the original Headset USB travel cable, headset LED is bright orange and the LED color changes to green after a few minutes.
When I disconnect the headset no lights are bright and the headphones does not work.
After charging more then 1 hour the same answer.
When I put the headset with the USB cable connected in my ear, I can hear the sound signal very low volume of pitch high e. When I push and hold the button of the headset tone is stronger.
When I disconnect the cable, the helmet is instantly dead, no lights, no sound, nothing happens when I push the button on the short headset, for a second, four seconds, 10 seconds or even longer.
Is there a possibility to reset? A new firmware? An Exchange program? Any help?
Max
The helmet has been abandoned, I think that 2009. So, it's long after the warranty. BT headsets have come a long way since then. The Apple headset does support A2DP, now standard. I he write off and buy something current.
-
iPhone 6 more cannot sync after the upgrade to version 9.2
Hello
My iphone 6 more used to synchronize successfully with itunes. But when I've upgraded to version 9.2; my iphone fail to sync (latest itunes 12.3).
I tried many ways, as said in the previous discussion (such as reinstalling itunes, restore iphone... ect) but it's still sturborn.
Can someone help me out of the question?
You will need to provide us with details of what prevented you from synchronization. Without information about what happened when you tried and what prevented you to do, there is little, we can offer you.
See you soon,.
GB
-
Vista crashes with the movement of the mouse
original title: SERIOUS PROBLEM NEED HELP FAST
When I turn my laptop on my desktop background loads and then everything freezes and won't thaw and I can't click on anything else that my mouse always moves
I let it sit for hours and still nothing it was still frozen. Any help? I think that something is very wrong with windows.HelloAfter running as Startup Repair described above use a clean boot.
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions. (You can configure a boot in Safe Mode).---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Proceed as follows: (if you have not yet done so-use Mode safe)
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Control of animation with the movement of the mouse.
I know there are ways to control the videos and SWF files with the actions of the mouse in Flash Catalyst. But how you can set it so that the swf animation will return back and replay from the beginning once the mouse moves anywhere on the trigger? My animated movie play once on turnover but rest then on the last image when I try to trigger once more. Any ideas?
Catalyst is just one step to Flash Builder to complete the flex application. The flex app coder will take your project catalyst and do what you need. Catalyst is designed to give you basic functionality to send your wishes, but ultimately a coder will be responsible for ensuring that your project works as you wish.
-
Reset my iPhone to unlink my phone with the apple ID factory settings?
I can't activate my iPhone because it is bound to one apple that I no longer have access ID to will reset the iPhone back to factory unlink my phone with the iTunes account?
Please can someone help me!
-
iPhone 6s more repair - confirmation of the serial number for the new phone
Hello
I sent my phone in for repairs recently and received a new one. Of course, the new phone has a different serial number and I want to sell it. How can I get confirmation that the iPhone I received instead of the iPhone, I sent is what I got? The buyer expects me to have a confirmation from Apple that says I sent them a phone with serial number 'X' and they sent me a serial number "Y". I have no way to confirm this, it is very urgent.
IIR, you got it in the mail, it should have a packing slip that accompanies it with serial number for information. who can be paired the phone room in settings/general/about. Should not your old phone number because it is no longer relevant. Warranty info can be obtained with the new serial number
-
problem with the movie maker project
I need assistance with windows movie maker. When I try to import images into the project, I get the message that it won't work brcause I need a responsible low codec. What is the will
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
Codecs: Frequently asked questions
See you soon.
Mick Murphy - Microsoft partner
-
Dell pro 8 black screen sometimes venue if he wake up with the windows key
Sometimes if I wake my Tablet pro 8 of meeting point with the windows key, I see is black screen. It seems minimal leak backlight of the screen, but a few pressing the button of windows do not display the log on screen. The Tablet is NOT turned off. If I press the power button, I always get the screen turn on with screen, connection immediately. Is this a common problem or am I unlucky? Thank you.
Hello, I'm having this problem with my unit as well... DV8Pro will not wake up from slumber. I had to press the power button for 10 seconds to start up again. I just had for a month. Someone at - he found a solution to this? Reference dell is listening to its customers?
-
iPhone personal hotspot works only with the new Windows 7 PCs
Old laptop with Windows 7 would always connect iPhone personal hotspot using the USB cable. Tried to do the same with the new laptop and nothing. Tried it on a different laptop using the USB cable with the same phone and connected.
- iPhone personal hotspot is activated
- USB cable connected
- Reset the network on iPhone [according to the suggestion of Apple forum]
- Tried troubleshooting via Windows
- IPhone enabled drivers in printers and Windows devices and driver date is 06/21/2006. I have tried driver update and Windows says that the best driver is installed
- Network discovery is on
- Public is the profile that I put
- iTunes was not installed
How can I fix? Should I delete the current iPhone driver?Thanks in advance.Installed work iTunes and hotspot. iPhone is a 3G!
-
A folio export to a PDF file, with the movement of the folio?
I want to show people this paper, so I can receive feedback. They must receive the document by post, so they can open with own device here. Hope you can help me. Thank you!
Oke, thanks. I think I need to manage pages in another document (book), so I can export it as an interactive PDF. I loved the movement of pages by using folio Builder. By chapter, I can go down and the next chapter is right. Is it possible to have that in an interactive PDF? And you know an easy way to copy and paste objects in the statutes of the folio to a new document. Items of the folio are much larger than a normal A4...
-
Missing an account e-mail coincides with the move of the VM of the Exchange Server
Coinciding with a move to Exchange VM from one host to another, email before a certain date disappeared for a single account (about 40). It was restored from tape, but we are looking for a reason why it happened. This employee had left, two users have full access to the mailbox and to use it actively. We found nothing conclusive on the Exchange / Outlook end. is there a risk of data loss when you move a virtual machine and where I'd look for (log file) an explanation?
Thank you
To be honest, I don't think that the issue is with the migration - me smells like one of users accessing mail is manually moved mail out of the mailbox or put on automatic archiving - IMO if we he realized the entire mailbox migration corrupt would not be of a specific date and not just a single mailbox.
-
My 5s iPhone camera will not work with the new color
I don't know if it's me, but my camera iPhone 5s doesn't seem to work with the new color. Click on the Photo and it shows a white screen. Upstairs, he says Live - Photo - and an icon of a camera. The screen is black and at the bottom is an X and the circle for the camera. Nothing. Someone else?
Can ensure you that you have authorized access to the camera of the app? on iOS, go to: settings > privacy (make sure color is on). If this does not work, can you please send the OS version you are using?
-
store the object reference handle (MOR) to synchronize with the virtual center of vSphere
Hello
I am able to store a bit in my own DB and assume that they don't change, so that I can match the entities in the virtual centre with those of my database loading my application?
Document best practices of Balaji Parimi (http://communities.vmware.com/docs/DOC-9912) States:
Caching of managed object references rather than their
Properties makes it easy to keep the cache to update. It is easier to maintain
the cache, as the references remain unchanged until the managed object is removed from the inventory of managed object.Because of this comment, I am inclined to believe that I should be able to write the bit on my side in the DB and use them as described.
Why I ask this is because:
It seems that a lot of people is keen to track VMs by uuid. I'm guessing they are only followed VMs, otherwise they would probably have the same problem I'm having (ex: If a Resource Pool gets renamed while the application is down, how can you identify whether the same as the one you had).
The vSphere Web Services SDK Programming Guide seems to be confusing by having a section entitled Do not store Managed Object reference values. This section seems just to point out that the MOR is not the same between the vCenter server and ESX box. Because I don't like to manage the host communicating directly with it (and keep track of the GPR in this way), I don't see how this would apply.
Has anyone been matching their own entities vmware with JAWS? Is there a reason for (am I wrong something)? Wouldn't be wonderful if this confusion has been cleared up by Balaji Parimi or VMware themselves.
Thank you
Ivan
The recommendation contained in the best practices doc is right.
You can store the MOR of an entity in your DB.
For such objects as hosts, VMs data warehouses, etc... Essentially, this is the unique key that identifies the object.
And the MOR will change during the lifetime of this object in the DB vCenter.
The only way it modifies if it removes and adds the object. So for all practical purposes it is a new object anyway.
What the program guide refers, is the fact that this MOR the 'ID' of the object is only within this system namespace.
Thus, the VM MOR is unique within the Victoria Cross.
That MOR are only may not or may not even be object even if you connect directly to the ESX host using the SDK.
The guide is just trying to clarify that the MOR of a VMS in vCenter isn't the same as if you connect to the ESX host directly.
That said, if you never connect to the ESX host directly you must not care about this specific recommendation in the guide.
Hope that clarifies things.
-
3.6 LR is more external changes with the original stacking.
I don't know if it's the result of a recent update, but when I send a file to the PS to edit and save, it not is therefore more superimposed with the original RAW file.
Previously, I would hit CMD + E, a tiff file would open in PS and after saving the new file itnthe appears in LR, stacked with the original. This is not the case more and I can't understand why.
Any ideas?
Yes, it is a small annoyance in LR3. LR3 remembers the photos has changed since the last edition of the battery or not a non-Raw photo as a copy. When you edit a Raw, it uses the last used choice.
The solution is to select an arbitrary non - Raw (JPEG, TIFF) photo and choose «Edit in PS...» ». When the dialog box appears, set the option of stacking downstairs as you like (in your case: activate) and simply dismiss the dialog without actually loading a copy in PS - LR will remember the setting you did. The next time you edit a raw in PS, who remembered setting will take effect (so the new image is superimposed with the original Raw once again in your case).
P.S. in LR4, this has been fixed: the decision whether or not the battery is more made in the dialog box "Edit in..." for no-Raws, but is a fixed configuration in the preferences that apply to the Raws and no-Raws. See also here: http://feedback.photoshop.com/photoshop_family/topics/lightroom_raw_edit_in_photoshop_make _the_stack_with_original_option_available (the issue has been resolved differently from what I proposed, probably because that "Edit in PS...) (' is supposed never to show the dialogs for the Raws, so it was resolved as a preferences option instead).
Maybe you are looking for
-
Even if I have the box "open new windows in a new tab instead" checked, when I click on one of the links in my Bookmarks Toolbar, it will open in a new tab window. I clicked several bookmarks in the toolbar, and it happens on each of them. Also, when
-
Y at - it an option to disable automatic execution for the House, shared libraries?
While most of the people like AutoPlay, when it comes to my home library share (computers), it is not necessarily the case. I was unable to find a way to disable this automatic reading as you can for Netflix and Hulu. Does anyone know of a way to ch
-
I just download a pack of card customized by using spy Playmate zombie and ask me where I want to unpack to I don't know where to put it, I searched on the internet and it came with XP and VISTA without windows 7 NOTE This IS for CALL OF DUY WORLD AT
-
Chargers &; batteries W450
Hello world If I check my W450 charger, it says that the output is 5.1V and 750mA. However, I am looking into buying this laptop battery pack: http://www.mec.ca/AST/ShopMEC/Electronics/BatteriesChargers/ChargersAdapters/PRD~5029-551/chargeur-portatif
-
My mpfilter.sys is missing or damaged. What can I do about it?
My computer gives me this message in the Windows recovery environment, my mpfilter.sys is missing or damaged. What can I do about it