iPhone 6s will turn off 30% of battery

Similar Questions

• What to do when iPhone 6 will turn off by itself?

  I've had my iPhone since June of 2015 6. I have always been careful enough with it and have never broken broken screen or caused dents in the aluminum body. At the beginning of January 2016 (this year), I had not had a single case on my iPhone and he got up on the table and accidentally drop playing with it. When I picked up back, the screen completely faded and discolored unusual and then turns off completely. The screen went black and regardless of how many times I tried to turn it on, restart it or to load, it still lights. I went to the Sprint store two days after using watch it. The person helping me to told me it would be about a two-hour wait. I come back to the left, after an hour and 45 minutes, and the employee told me that they could not find what the problem and gave me a replacement. The replacement has acted since with it restarts itself when not in use. For example, if I use my iPhone for 30 minutes straight, it would be turned off after that I locked and would not come until after about 20 minutes of me trying to restart it. A red screen might flash just before going off as well. Unfortunately, this happens at least once every day. I tried to go back to the Sprint store, and told me to try the Apple Store. I have not tried to make an appointment and go for the moment. Are there solutions to the problem that I am experiencing that I can do myself or is that called to replace another?

  First of all, you should have taken the first device at the Apple Store, because they are the ones who run the service under warranty, and the unit was still under warranty. Your replacement the Sprint device, it is unclear what kind of device you have received from Sprint, and that can not be under warranty. I recommend that you make an appointment at the Genius Bar to the nearest Apple Store to have this unit looked at and whether she has any guarantee in this regard. It could be a device that Sprint provided you may not have any warranty on this topic and Sprint messed up you the 6 month warranty on your iPhone. The flash screen you describe looks like a hardware problem.

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• Screen of blackBerry Smartphones will not turn off and kills battery

  When I had first the curve 8330 screen turns off after a while and kept my batterylife. Now, the screen never stops and I change not any opportunity to do that and its killing my battery. How to fix this?

  Well I just went back to make sure that all my applications have been closed and one was not and the screen has not come back. Thanks for help... im so new to this phone! haha

• iPhone can not turn off

  Hi my iPhone brand new 6 more will not let me slide to use, try turning it off, but let me won it to do? don't know how to remover the battery so I can reboot, can anyone help please

  Hold the power button and the home button at the same time until the unit turns off.

• C50-A-1HF satellite will turn off by itself after 2 seconds

  Hello

  the laptop turns off by itself after 2 seconds when I turn it on. This happens if I shutted down or choosed hibernate before (Win8.1).

  This means hibernation is not at all useable.

  The next time I turn it on it works quite normal! Sleep mode works as well. Standby mode it is ready for use after open them both as a repetitive. Fascinating!

  I looked on all the settings of the BIOS, but I found nothing what could be the reason for this behavior.

  Perhaps there is a correlation with another strange behavior. The battery will not be charged over 80%. I do not use the green mode. I have to turn off the laptop and remove the battery completely for a minute. After inserting and booting Win8.1 what it charges again at 100%.

  The discharge time is approximately 3.5 hours. Otherwise, the battery is ok.

  But after the next discharge up to 10% charge that up to 80% more.

  These two effects are not normal. But I don't think (or better, I hope) that there is a material defect.

  Is there a chance does not post the laptop to a repair service?

  Best regards

  Onurbi

  Hey man it are so strange problems and it's not easy to say what to do. All you can do is to install the original recovery image and test with the settings once more, of course without changing anything or install updates or additional applications.

  If possible to do this and test it for a while.
  > Is there a chance does not post the laptop to a repair service?
  As you probably know your possibilities to do something about this are very limited and if there is permanent problem I think you should contact the closest service Toshiba and clarify all of this.
  You have the new laptop model and it should work properly. If you are not happy and there are service problems Toshiba should take are about it and help you.

• iPhone 6s constantly turns off automatically after reboot

  I have an iPhone more 6s running the latest public version of 9.2 and he began presenting questions a couple of days.  It worked without problem to release iPhone day so far here.  I was using the phone (reading e-mail, browsing safari) when the low power WARNING mode blown up when the battery reaches 20%.  I ignored and used for a few seconds and put it down to my charger and cable. All this happened in less than a minute when I plugged the charger into the socket, and before I plugged it the button home is hot and the screen would not activate.  I read another thread for this particular issue and a reboot of the phone usually solves the problem (press and hold the home key and and the button power/sleep for 10-15 seconds.)

  See this post here:

  My iPhone 6 sec Home button is really hot and the unit does not light

  Also, I called Apple and the representative of the Applecare she succeeded to remote into the phone and run the diagnostics, but nothing have mounted. She advised if the question comes up to bring it to a store.

  The initial reboot worked fine, however I noticed later, it takes about 3 minutes after a reboot, the phone turns off again unless I use it.  Sometimes the home button gets hot, most of the time it didn't.  I'm on my third day with a semi useless phone.  I have done the following to try to resolve the problem:

  Reset: no chance

  Reset to factory settings: no chance

  Restore from iTunes and Back Up Software: no chance (and I've had more problems with vertical and horizontal lines randomly after a few moments.)  I had to let the phone sit an hour and 'cool', before I could do another restore)

  Restore from iTunes: no chance

  I have a Genius Bar appointment for this afternoon, so we'll see what they say.

  Acording to Apple geniuses, there was a problem of hardware and software, and they replaced the phone without hesitation.  It seems odd that all of a sudden it went wrong.  I read in the previous thread that some bad Samsung chips have been used in some phones.

• iPhone 5 sec. turns off suddenly

  Mr President.

  When I wake up to the top of my iPhone, turn off and after a few minutes the hot entrance on the side of the battery more then an hour until this phone OFF.

  could you please help.

  Thanks and greetings

  Khalid

  The battery or the screen was replaced by the past?

• The screen of my laptop turns off when my battery is low. Can I turn this off?

  I have the HP Pavilion n018sa 15. When my becomes low power (10%), the screen shuts off and I have to press the power button until it restarts. Is there a way I can stop my screen turn off without having to plug?

  Hello

  Thanks for posting in the HP Support forum.

  I think that your computer is in hibernation or standby is (or tries), but you see it as screen go off.

  He must manage the bass and critical low levels of power - information management:

  http://Windows.Microsoft.com/en-SG/Windows-Vista/choose-low-and-critical-power-levels-for-your-battery

  You can also stop the computer to go to sleep/hibernate:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  (How can I prevent my computer from automatically sleep or standby extended?)

• Satellite A30 554 will turn off by itself.

  My Satellite A30 554 for a reason any began to turn off on its own after working for a while or even during startup. This happens both in Win XP and SUSE 10.0. I used the CD recovery to format the entire hard drive and reinstall the system and even during this computer just turned off, so it's sort of a problem material I think. Suddenly, this thing started to happen as early as last week. I have also had problems with before starting - just get a black screen instead of system startup, but usually remove the battery and put the rank or start once helped. Computer two years ago, and I think the warranty is over. What may be the cause of the problem and what can I do now to solve?

  Hello

  Sometimes the notebooks closed because of overheating problems. There are a few reasons why units overheat. One of the reasons is the Sales cooling fans. Fans don property t work because of dust inside the laptop. In this case, I recommend to check the ventilation openings and clean it. You can use the vacuum to suck up dust.

• TouchSmart 600-1315xt will turn off by itself

  My subject PC that is running Windows 7 turns off on its own when it is sitting idle for some time. When in use, it works very well and when you stop screen saver will come after 10 minutes, then after sitting idle for 30 minutes it will fit off the coast. If someone knows what could be the problem?

  The Power Options in Windows 7 settings would be the second thing to check after inspecting admission and exhaust ports of your PC. If there is any dust bunnies blocking the air circulation while there could be quite a show of heat that could cause the CPU to stop the system.

  Best regards

  ERICO

• IdeaPad Y530 wireless wifi is turned off then on battery

  I have a new Ideapad Y530 Intel 5100 wifi wireless network card. It works fine when I am connected to an electrical outlet, but when I am on battery it loses connection Wireless after about half an hour of use. When I check the network card, it shows that it is disabled. I'm trying to enable him, but she remains disabled, I can't operate unless I restart the computer. I've done so far that has not fixed it problem:

  1. I checked the power management settings in the device for the network card Manager and you have unchecked the box "allow the computer to turn off the device to save power".

  2. I already uninstalled Readycomm since I had problems with it before

  3. I also affect roaming aggressiveness 1.

  Can someone direct me on how to keep network to get wireless card disabled when I am on battery?

  In addition, once I lose the connection Wireless because the network card is disabled, Windows Vista network settings are really slow to come for me to check my network connection and settings, never had this problem with XP. System seems to hang for several minutes before I can get into the network and sharing Center.

  Thank you.

  I think I've figured this out. I disabled and then uninstalled the power management Lenovo that at first seem to solve the problem but didn't. I knew that it was something to do with power management, so I checked my settings and it was set to energy saving. When I changed to balanced remained turned on the wireless network adapter and I have not lost my network connection. I checked power options advanced for the adapter in symmetric mode and energy-saving wireless and found that Power Saver if it had set for the Maximum energy savings while only balanced if it had set for maximum Performance. The setting for maximum energy savings, it is this that kept disable the wireless card with after several minutes, I changed it to the following configuration, low energy and my without thread remains active and I don't lose my network connection. So for anyone else having problems with the loss of their wireless connection, try to check your power management settings.

• "Display will turn off.." ELPH 160

  While I'm trying to focus on a topic why my Canon ELPH 160 displays the message: "screen turns off. Any operation reactive'? I can't concentrate with a black screen, and tapping a button disrupts the development. I could understand this if the battery was low, but this happens even with a fresh charge. Is there a setting I can change to disable this message?

  Yes in your settings menu there is a setting energy saving where you can adjust the time before the screen turns off

  

  Here is the link to the user guide that the information can be found on page 74

  http://gdlp01.c-WSS.com/GDS/1/0300017431/01/elph170is-160-CU-en.PDF

• System Restore will turn off by itself.

  It happened, but rarely and without apparent cause or sequelae. Larely, it was repetitive, once again no reason apparent, but apparently interconnected with the sudden disappearance of HP Quickplay, also by itself. My two scans, MSE and MBAM didn't pick up malware.

  I have since restored to an even better version PS. My PC works fine without apparent probs.

  I checked SR seconds ago and it is powered and creating RP of as usual.  But an individual isolation of SR is very troubling. How prevent it from happening again?

  Hi Coolnewyorker,

  Thanks for posting in the Microsoft Community. I understand that the system restore will automatically close on the windows vista computer.
   
  I apologize for the inconvenience and no need to worry I'll be more than happy to help you.
   
  1. What antivirus application do you use on the computer?
  2. did you of recent changes to the computer before this problem?
   
  Follow the steps and check if that helps.
   
  Method 1
  Check the status of the shadow copy volume service. If it is, then try to restart the VSS service and check.
  (a) click Start, type services.msc in the start search.
  (b) search for the shadow copy Volume service.
  (c) make a right click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.
  (d) if it is stopped, select start or restart. Make sure that the service is started and set as automatic.
  (e) click on apply and OK, if you make changes.
   
  
  Method 2
  You can also try temporarily disabling computer security software and check if it makes a difference. If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  
  Method 3
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
  Let us know the status of the issue and if you need help I'll be more than happy to help you.

• When I pick up my Windows 7 Acer Aspire power, the computer turns off when the battery shows fully charged

  I HAVE A CHILD OF 1 YEAR ACER ASPIRE WITH WINDOWS 7, WHICH IS CONNECTED TO BE WIRELESS. BUT WHEN I GET MY COMPUTER TURNS OFF THE POWER SUPPLY CORD. THE BATTERY SAYS FULLY CHARGED. IT WORKED AND NOW IT WONT. SOMEONE CAN ME SAY WHAT THE PROBLEM IS. I EVEN WENT BACK THROUGH HIM WITH DEFAULT AND IT DID NOT HELP.

  Hello

  Are you aware of any changes made to the computer, before the show?

  I suggest to change the power management and check for the issue.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  If the above does not help, I suggest you to contact Acer support for assistance.

  http://support.Acer.com/us/en/default.aspx

  I hope this helps.