iPhone does not appear to find my iPhone after that they stole it

Similar Questions

• Agent does not appear in Enterprise Manager GC after having redeployed

  Hello
  
  We run Control 11g Grid.
  
  One of my team members deployed a screening Officer Grid out on a server using the 'Installer Agent' feature in Enterprise Manager GC.
  
  The deployment of the agent worked successfully. The host name of the target server appeared under the screen "Hosts" in the tab target GC Enterprise Manager.
  
  Shortly after my team member has deployed the agent, he realizes that he had installed the Grid Control Agent in a home misspelled agent on the target server. He then tried to remove the agent. He did it by closing the agent and by removing the home directory of the agent on the target server. He realizes then that the removal operation was not complete, so he took the host via Enterprise Manager user interface. He did on the hosts screen tab target. He has selected the host and then choose 'delete '. There are no databases or headphones on the server target, so he could not remove these first.
  
  He then tried to redeploy the agent. Agent deployment operation said it has successfully completed, however the host name does not appear under the screen of 'targets' em. In addition to the "history of deployment" section of EM, there is no trace of the host in the console business at all.
  
  The agent is running on the target server. The expected ports are in use.
  
  On the target server, I tried running
  
  $. / emctl status agent
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Home Agent: / sv/app/oracle/gcagent/agent11g
  File binary agent: / sv/app/oracle/gcagent/agent11g
  Agent process ID: 15613
  Parent process ID: 15583
  Agent URL: http://xxxxxx:xxxx/emd/main /.
  URL of repository: http://xxxxxxxxxxx:xxxxx/em/upload /.
  Started at the: 2011-05-11 13:40:52
  Started by user: sv_ora
  Last reload: 2011-05-11 13:40:52
  Last download successful: (none)
  Last attempt to download: (none)
  Total megabytes of XML files uploaded so far: 0.00
  Number of XML, files awaiting download: 44
  Size of the XML files in the upload wait (MB): 2.42
  Available disk space on the file upload system: 86,33%
  Last attempt heartbeat to WHO: 2011-05-11 14:05
  Last pulse in SGD: unknown
  
  These two lines are a few concerns:
  
  "Total megabytes of XML downloaded so far: 0.00.
  "Last pulse in SGD: unknown.
  
  I was worried that no XML files have been downloaded, so I ran
  
  * < AGENT_HOME >/bin/emctl charge agent
  EMD charging completed successfully
  
  The 'status emctl agent' reports still 0.00 MB
  
  * I also ran < AGENT_HOME >/bin/agentca d
  
  * We restarted < AGENT_HOME > root.sh on the target server and restart the target server.
  
  Also, I restarted the entire SGD on our server of the grid control.
  
  I suspect that moving original host of the marked grid host somewhere as being "removed from grid control. I think that the redeployment of the agent has not updated this record, so there is always a place marked as deleted. I just do not where it is.
  
  Does anyone have any ideas on how to proceed from here? I am happy to download all the log files who think can be useful.

  Hello
  Please see the article-ID "grid Agent resynchronization translates ORA-20206: target does not exist: agentmachine.domain:host" [1273737.1 ID]
  MOS...

  The reason may be that the agent has been reinstalled on the node and that the target.xml file is not correct. You can find the file target.xml
  in the directory $AGENT_HOME/sysman/emd. It might be useful to check this file because it contains all the discovered targets.

  But try to follow the instructions in the article mentioned ID...

  Published by: VivaLaVida on 11.05.2011 08:12

• Windows XP Mode does not appear in the start menu after installing it successfully

  Original title: xp mode w7pro

  try to install xp mode/virtual pc on 7pro. down loaded and ran but does not appear in the start menu.  Active virt.tech. in the bios on a thinkpad x201i.

  First Install Virtual PC and following the XPMode.

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Notes for the drawing feature does not appear in my Mini iPad after update 9.3

  After update to 9.3 on Ipod Touch and iPad Mini (original) (generation 5), the Notes applet does not show the drawing tool in the toolbar. My age of devices is the reason for this limitation?

  Post edited by: jesternrb1

  Yes, it is, or the first generation iPad Mini: https://help.apple.com/ipad/9/#/iPada9fb7c64

  Note: The sketch feature is available with notes of upgrade on iPad Pro, iPad (4th generation and later) and mini iPad 2 and later versions. If you have the iPad Pro, you can sketch in pencil from Apple.

  or the fifth generation iPod Touch: https://help.apple.com/ipod-touch/9/#/iph1e1d28202

  Note: The drawing feature is available with upgrade on iPod touch notes (6th generation) and later versions.

  Support it

• LR4 does not auto launch import dialog box after that one card is imported.

  Hi all

  I upgraded to of LR3 LR4.  Works on a new iMac with mountain lion.  LR4 said its updated.

  If I import images of several cards that LR4 will automatically detect the first map and bring up the dialog box import, import the images and then ejected the card.  When I pop in the next map there is no automatic import dialog box and I have to go to the drop-down list so he could start.  When the second card is important it doesn't auto eject and I have to do it manually.  Automatic detection is checked.  Eject after that importation is checked.  And the LR4 app is open (not trying to start LR when I put a card).

  I did some research with no luck so if there is a thread about this please send me the link.

  Thank you all!

  For testing purposes a couple of things to try:

  1. try to create a new, empty catalog. It works as expected in the new catalogue empty?

  2. If not. Close Lightroom, rename the preferences file, open Lightroom and it will rebuild the preferences file. What is fix?

  Preferences file: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html

  If she doesn't fix it, you can rename your preference back to your workspace to restore files.

• Books audio does not appear on the clip... but they appear on my computer

  I just got the video yesterday. I love.

  I dragged a bunch of music during 'My music' to the clip and all that everything went well.

  I dragged a few books,"I had more that were stored in the 'My music' in iTunes in my iTunes library

  folder... When I display video hard drive on my computer screen to see what is stored in the Audiobook box it shows

  the books are here... When I disconnect the Clip and go to the section audio books it is said 'empty '.

  Is there a way to get the books on the clip?    (I noticed that they are mp4 in my itunes and mp3 library in 'my music')

  Thanks in advance.

  Either way, I picked up this 4gig on slickdeals.NET for 34 dollars sent.  Bargains out there.  Greg

  jeba8888 wrote:

  Thank you again...

  You know of any software to do this conversion?

  iTunes will convert.

• Why my laptop does not have the orange button Firefly after that I updated to version 5.0?

  I still have the usual items in the upper left corner: File, Edit, View, history, Favorites, tools, help.
  Then there are lower than my Web page tabs... Everything looks the same as the page getting started, that Firefox has for beginners.
  I'm not super intuitive with computers, so forgive me if this is an obvious solution. Thank you.

  If you have customized your menus or toolbars, then Setup can not you go to the abbreviated menus. To switch manually, go to

  Menu view > toolbar > uncheck the Menu bar

  ---

  In the future, you can display the classic menu temporarily bar by tapping the Alt key or by pressing the F10 key.

• My acquisition of data NOR usb-6008, does not appear in labview after installing drivers

  My DAQ does not appear in my labview program after installing the drivers. I can't add it to my program or anything like that. I installed 3 different drivers and updates, and it's still not appearing in labview. Is there something I'm missing or need to do yet?

  Thank you

  It seems that you have a damaged file somewhere in your installation.  You will need to go into the control panel and select the option to repair the installation.  You will need to run the repair twice due to a known problem.  After that, you need to reinstall the NI_Daqmx 9.4.

  Jacob K

• volume control icon does not appear at startup but appears on disconnection.

  Control of the volume icon in the bottom right of the taskbar does not appear on the startup, even after unchecking and rechecking. But this appears on disconnection. Once again reboot it disappears. Number of attempts have been made in the section audio and audio to uncheck and check the menu "set the volume control on the taskbar" again, but the problem remains. How to solve the problem with Windows XP service Pack 2?

  Just to add to the response of T from B, you can see if you have sndvol32.exe here:

  c:\Windows\System32\dllcache

  To get to the address above, you will need to show hidden files is selected in the Explorer (right click on desktop > Explorer > tools > File Options > display (or view) > scroll down.)

  You then simply copy the file in c:\windows\system32, overwrite when asked.

  See you soon,.

  Jerry

• HyperV 2012 SMV "off the power" does not appear in the converter 6.1.1

  Hello

  Environment:

  HyperV 2012

  VMware Converter 6.1.1

  VMware 5.5

  I want to convert all Hyper-V in VMware virtual machines

  A virtual machine worked without any problems! Power off of the virtual machine and do normal "conversion process" - all right, but all the other VMS does not appear in the converter as soon as they are "off".

  I start VMware Converter

  -Convert the Machine

  -Source HyperV - Server (Powered off)

  that shows me all the virtual machines on the Hyper-V environment. As soon as I turned off one of the virtual machines that VM is endangered. I see not the virtual machine until I have restart the virtual machine.

  All ideas

  Thank you.

  Hello

  so, finally I had to delete all virtual machines to Cluster Hyper-V role, restart the converter on the Hyper-v host Agent, and then everything went well.

  Thanks for your help!

• Exporting PRM does not appear in After Effects

  I am writing a custom exporter PRM plugin. The plugin to load successfully in the creation and Media Encoder, but does not appear in the list in After Effects. I ran AE in debug mode and it is without doubt the plugin loading correctly (the journal also shows this). How can I make it appear in the user interface?

  Creation/SOUL export plugins are not supported in AE.

  Use EI, you must export to SOUL instead of queuing in AE.

• Adobe first does not appear as an available in Adobe Application Manager application. Why?

  When I signed up for Creative cloud there are a number of products that appear in the site Creative cloud applications, but when I try to download Premiere Pro it does not appear as one of the applications that I have in the Adobe Application Manager. How can I download Premiere Pro?

  Hi Sir,

  We apologize for all the inconvinence you had.

  I just wanted to check you are using an OS that is 64-bit.

  Premiere Pro is a 64-bit application & would appear only to Application Manager if your 64-bit system.

  1. you can go to start > run.

  2 type MSINFO32 & OK

  3. system type if there is a x 64 PC it is on another 64-bit it suggests x 86 32-bit

  Thank you

  Florian

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• My Port of Air express does not appear on the usefulness of air port on my iPhone

  I have an Apple air port express router to connect the remote speakers. I installed a new router wireless modem Arris and reconnected successfully the apple tv. However, the air port express does not appear on either of my iPhone airport utility or the menu wi fi iPad. So I have no way to connect air port exress my router to base.

  If your AirPort Express Terminal has already been configured as a receiver AirPlay, and it is not on the current WiFi, AirPort Utility has no way to find. I suggest that you use the button on the airport to restore it to factory settings and to reconfigure it according to the manual. You can also configure your new router to use the same SSID and key as the prior network. Then, the airport will not know the difference.

• my iphone 4 does not appear in my "peripheral" on my apple account!

  After scoring in the appleid.apple.com Web site, when I search for my devices under the "Devices" option, my iPhone4 does not appear. It is connected to iCloud and "Find my iPhone" is also enabled/activated.

  This is not where you would search for your device thanks to find my iPhone. That has to do with the devices that you have recorded with your Apple ID the device location thanks to find my iPhone on iCloud is via http://www.icloud.com and then connect with your login to iCloud.