Agent does not appear in Enterprise Manager GC after having redeployed

Similar Questions

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve

• How can I delete a drive letter that does not appear in disk management?

  After updating my firmware of dvd writer has been assigned a new drive letter (j), however the old letter (f) always watch under 'my computer' but does not appear in disk management. How can I remove or remove (f) so that I can reassign my dvd burner? Windows xp sp3.

  Thank you-

  Try to run, type: cmd cmd type: diskpart in diskpart, type: list disk

  Type: HELP to handle the letters.

  Also, technical material, highlight the hardware, R.click, select listed "uninstall."

  for all that is needed, w/o reboot pc, once thru, output, pc shutdown.

  Change the connection on the material to another (moving pins connector

  thereon if necessary, slave/master), once through, start pc. XP will reinstall it at startup.

• Control Panel is not on the list. Users and local groups does not appear in computer management.

  1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  2. local Users and Groups does not appear in computer management.

  There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

  Hi PJohnson,

  You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

  http://support.Microsoft.com/kb/811151

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• My video card does not appear in Device Manager... it's a HELP of PNY (GeForce FX5700 VEDDR 256MBAGP GF5700VA8D25D)! DRIVER NEEDED?

  My video card does not appear in Device Manager... it's a HELP of PNY (GeForce FX5700 VEDDR 256MBAGP GF5700VA8D25D)! DRIVER NEEDED?

  -The 'legacy' drivers are not technically a restore because there was
  never a movement forward to Win7.
  They are only a newer version and probably the last, the pilot who was provided for
  Some older cards on older (legacy) systems.

• Samsung SH - 222AB DVD Burner is winning 8 compatible but does not appear in Device Manager

  I installed a Samsung SH-222AB DVD burner as a secondary disk drive, but it does not appear in the Manager of devices or anywhere else on my PC, and yet it is 8 compatible windows

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Samsung%20SH-222AB%20DVD%20Burner&vendor=Samsung&Locale=1033%2C2057%2C3081%2C4105%2C16393&BreadCrumbPath=Storage%20devices|Samsung%20&Type=Hardware&tempOsid=Windows%208

  the door opens, so it has power to the drive

  Seems that it was not a drive problem, data SATA cable broke the connection that is installed on the motherboard

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• Why my XP does not recognize a Toshiba 500 GB USB external drive... it does not appear in disk management or in computer

  Bought a new Toshiba 500 GB drive external usb.  My XP desktop won't recognize/find this disc.  It does not appear when you view the disk management or work station.  I also have it on my new laptop (Vista) and it has been found immediately.  My research online only tells me to find the external drive in disk management and assign a drive letter to... but I don't think to assign a letter! Toshiba says that the drive is compatible with XP. I have another smaller disk capacity that work perfectly on the XP machine.  Please tell us what should I do to have my Office XP recognize the
  is the new external hard drive.  E-mail address is removed from the privacy * or * address email is removed from the privacy *.

  Three things that you have not yet mentioned are

  1. don't change you the registry suggested by the KB Article (see: a computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive)?  I suggest do it manually instead of using the FixIt.

  2 represents the drive recognized in the Device Manager (start > run > devmgmt.msc > OK)

  3 is the drive recognized in your BIOS (press the corresponding key on startup).

  Reformat to FAT32 was probably not necessary (and you'll probably want to re - format to NTFS before use).  XP has no problem with large (> 500 GB) external USB drives.

• Chat LX-3000 does not appear in Device Manager

  Chat LX-3000 does not appear in my device manager

  OPERATING SYSTEM:

  Windows vista Basic.

  PC: siemens futjitsu

  Hi Kiradante,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest to return the item and search for the error code for the device.

   

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  I hope this helps.

• HP 2000: Synaptics Touchpad driver trouble (installed but does not appear in Device Manager)

  I had a problem with my touchpad for months. The synaptics touchpad driver is installed but the touchpad does not work and does not appear in either (just my external mouse) Device Manager. . I tried various troubleshooting methods, but none worked. Any help would be a lot for me. Thanks (in advance).

  PROGRAMS AND FEATURES

  

  DEVICE MANAGER

  

  Hi @decyferme,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand that you had a problem with the touchpad for months because it is not responding. Although the driver is listed in programs and features in the Device Manager is not listed.

  Have you checked for virus and malware?

  Have you done all Windows updates?

  Have you tried to run the troubleshooter in Windows?

  Did you run HP Support Assistant to facilitate updates of HP?

  First you would try this step.  Some models, you can enable or disable the touchpad by double clicking on the top left corner of the touch pad.  Please see if it is applicable for you.

  Then in Device Manager, view hidden devices and search the hardware changes see if the touchpad now will be seen.

  Here is a link to the HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8) that should help you too.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this gave a solution for you, please choose the solution provided to help others to find.

  Good luck!

• Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

  Windows 7 Pro.  Dell desktop computer.

  My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

  In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

  Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

  Tried system restore, but it failed.

  What should I try?

  Thank you

  Hi Bruce,.

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

  I appreciate your efforts to resolve the issue.

  Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Why isn't the subwoofer in my HP Pavilion DV7 3067 CL does not appear in the management of Base of IDT?

  According to the description of the topic my subwoofer does not appear in the section base of IDT of the settings control panel management. My drivers are updated and current, not viruses or malware that infect the system and the subwoofer is physically present and should be functional but it is not. Someone at - he no clue as to what can be wrong? Links as a result of the laptop. If more information is needed please ask. Thank you in advance.

  http://h30038.www3.HP.com/assets/Usen/datasheets/Pavilion_dv7-3067cl_Entertainment_Notebook_PC_Sams _...

  http://support.HP.com/us-en/document/c01890529

  How are you Laeadern? Well, if you have not set the tone, you're not alone it seems computers laptops without the function of his Beats from HP does not have the tone control feature, or it is a feature of Windows Ultimate?... I have Windows Professional dv6, select fairly recent edition (bought this summer), I have no dial tone featured in sounds in the control panel.

  But in regards to low values and change them, I think you can change thorugh the IDT Audio software.

  Go to control panel and click on "IDT Audio Control Panel."

  Then on the albums tab, select read and on the left select speakers and headphones

  Under the menu that falls under the speakers and headphones select EQ

  Now you should see a menu with cursors for various changes in lower values if I'm wrong?

  You can also increase the low values in Sound and go to playback devices, select speakers and the headphones and then on the bottom 'Properties' and in the Properties tab improvements and check Bass Boost and hit the settings for Bass Boost and then check what is the frequency of 80 Hz and 3 dB optimization level. Also in the Properties window for helmet speakers and go to the Advanced tab and change the format of "24-bit", 96000 Hz (Studio quality)

  If you still don't see not your look of subwoofer by activating your subwoofer try these changes in the following link:

  http://Forum.NotebookReview.com/5668647-post3614.html

  Do not forget to easily cancel your changes changes unlike pressing generally 'Default' as in IDT of equalization you can manually return the sliders back to zero, or select the preset "Default". In the sounds, you can hit the default or change the default settings, good luck and these changes above should least improve your sound quality, I hope this works.

• Windows 8 can't find my SATA drive (2). It does not appear in disk management, but it appear when I open the tab of properties on any drive and click displays all disks. What should do?

  I bought a new computer (custom build) and Frys Electronics put it together for me.  Disk 0 is a 128 GB SSD, 1 disk is a SATA 2 TB drive, and disc 2 is a 1 TB SATA drive. Readers of 0 and 1 have been configured correctly when I installed Windows 8 but Drive 1 was not found\initialized. Player 2 does not appear in the disk management window, but when I click on properties on any drive, and then on the "hardware" tab, the drive appears.  If I can get windows to find it, I can go configure manually.  DiskPart cannot find disc 2 in the 'LIST' command and when I get in car 2 on other commands that require a number of disc, nothing happens.

  What should I do?

  Thank you.

  I ran an old Western Digital (the two SATA drives are WD) diagnosis and there are 1 OK to drive.  I tested it and it doesn't have a writing that test a few zeros.  I thought that it was a bad drive and I must return to the seller.  The next morning I tried the WD diagnosis again and this time he passed.  The app then allowed me to format it and it assign a drive letter.

  It seems to be OK now, but I'm not load all the files on it again.

  Thank you all for your support.

  Don

• Windows XP Mode does not appear in the start menu after installing it successfully

  Original title: xp mode w7pro

  try to install xp mode/virtual pc on 7pro. down loaded and ran but does not appear in the start menu.  Active virt.tech. in the bios on a thinkpad x201i.

  First Install Virtual PC and following the XPMode.

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/