iPhone in infinite loop updated after the 'restore' in itunes

Similar Questions

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Windows 7 will not be updated after the ranking of the 10 and clean install, image disk etc...

  Hello, I would be very happy to help. I recently tried the upgrade to windows 10 Professional, but then tried to downgrade to 7 Professional and problems have occurred. the downgrade was not working. So, I tried:

  * a clean install with a disc of windows 7 sp1 (from the original e6430 provision for computer Latitude) and found windows 7 would not be updated.

  * updated windows troubleshooting it is constantly with the same error and corrections:

  Problems encountered:

  -windows update error 0 x 80070003 (2016-06-13-T-11_06_27A) not set

  -subscription to the service is missing or damaged fixed

  -problems of recent installation updates fixed

  -problems of recent installation updates fixed

  * Reinstall system backup image

  Same problems as each time I tried windows update it is stuck and troubleshooting that it comes up with the same error above.

  Thanks in advance

  M$ just came out this

  You must use Internet explorer to download from the catalog

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  On an existing installation after the restoration of an image...

  https://support.Microsoft.com/en-us/KB/971058

  And the most recent client update

  https://support.Microsoft.com/en-us/KB/3138612

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Is it possible to continue using the LR app for iPhone without having to pay (after the 30 day track)?

  Is it possible to continue using the LR app for iPhone without having to pay (after the 30 day track)?

  Without having to pay US $ 149 - or 9.90 per month?

  I'd really like to get a positive feedback.

  Thanks in advance!

  The latest mobile versions are free to use, but for a full synchronization with Office LR CC is required.

  LR Mobile without subscription

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought, but it didn't wor

  How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought but it did not work.

  Hello

  Use the following link to download:-

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Cannot reinstall PSE 7 after the restoration of PC (Win XP). Impossible to uninstall, STUCK. Help, please.

  Error message when you try to start the 7 Elements after the restoration of PC (Win XP) "couldn't start b/c the application configuration is incorrect". When you try to uninstall 7, it doesn't appear in the Conrol Panel. But there is a Photoshop 7 folder in Program files. If someone could HELP Please, it would be greatly appreciated. I use this program so much!

  Thank you in advance...

  Here's the Adobe documentation to manually uninstall PSE7:

  http://kb2.Adobe.com/CPS/405/kb405847.html

  Ken

• Database is underway after the restore and recovery

  Database is in the waiting state after the restore and recovery.
  The database cannot start today and it displays an error message: 2 log file can be archived. Then I run the following command:

  SQL> select group#, sequence#, bytes, members, status from v$log;
  
      GROUP#  SEQUENCE#      BYTES    MEMBERS STATUS
  ---------- ---------- ---------- ---------- ----------------
           1        452   52428800          1 CURRENT
           3        451   52428800          1 INACTIVE
           2        450   52428800          1 INACTIVE
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
  
  Database altered.
  
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
  
  Database altered.
  SQL> alter database open;
  
  Database altered.
  
  SQL> shutdown immediate;
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  566231040 bytes
  Fixed Size                  1220580 bytes
  Variable Size             125829148 bytes
  Database Buffers          432013312 bytes
  Redo Buffers                7168000 bytes
  Database mounted.
  Database opened.

  But when I try to log on by using the EM console, it shows that the database is not open. Then I restore and recover the database by using the EM Console. But the database and then enter in pending status.
  What to do next?

  Stop the console 'EM, and then restart it. I hope all is well.

• I have an iPhone 5 s when I conect the phone to iTunes, which he sees as the iPhone 5 s, but the official Apple to the site he sees as the iPhone 5 c

  I have an iPhone 5 s when I conect the phone to iTunes sees it as iPhone 5s but the official from the apple Web site, which he sees as the iPhone 5 c

  How is that possible?

• Infinite loop start after updating to Vista Home edition

  I own a lenovo model 8705CTO mini tower PC.

  At the end of July, an automatic update of Vista cannot install properly, which left the starting in a State sequence, appears:

  "Configuring updates: stage 3 of 3-0% complete.

  "Microsoft Vista Home Basic"

  for 10 seconds, then

  "Shutting down".

  for a minute or two

  and restart again in the same loop.
  This loop lasted several hours.

  With the help of:

  "Rescue and Recovery - repair Express."

  the following message is generated:

  "Errors have been detected in the operating system."

  "Click on files" reveals:

  Details

  Status of name
  Bootmgr corrupt

  The bootmgr file has 325 KB

  Apparently, it was generated on 01/18/2008 and contains 333 203 bytes.

  Operating system restore points prior facilities only are not available, since the automatic update has left the system with the restore than identical behavior points.

  How can I recover without having to re - install the operating system from scratch?
  It is advisable to remove the bootmgr file and it re - generate from scratch?
  What is the procedure to achieve this?

  Thanks for your response (s)

  HD

  I have created the disk as described, as the 64-bit version. The standard disc worked and allowed me to use repair tools.
  BTW, these are already shipped with the LENOVO system, and I consulted the tools off during the START-UP phase, then by restarting the PC.

  The answer to the success of the recovery could be found here, after that I tried
  "Configuring updates: stage 3 of 3-0% complete.
  on Google and looking at various web pages:http://support.microsoft.com/default.aspx/kb/949358

  (Restore points were crushed, because automatic updates have been selected, and the computer ran unattended for more than a week by substituting the last point valid restore as update VISTA tried to re - install the updates failed every night)

  Method 3: Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method.

  • Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows.
  • Use this method only after trying other methods.

    Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue.

  • Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available.
  • After using this method, the following conditions may exist until reinstalling Windows:
    • An update is being installed may not be installed correctly.
    • Windows Update may not work correctly.
    • If an update is installed, you may be unable to stop the installation process.
    • You may be unable to enable and disable certain Windows functions in option.
    • Certain optional Windows features may not work correctly.
    • The computer may be in an unprotected state.

  To rename the Pending.xml file, and edit the registry, follow these steps.

  Start Windows Vista and go to system recovery options:

  1. Insert the Windows Vista installation disc in the disc drive, and then restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next.
  4. On the Install Windows page, click repair your computer.
  5. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

  Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

• iPhone 6 won't restart after the iTunes backup restore

  Recently, I've restored my phone to pick up things that have been deleted. He made through the restore on the computer then it said to wait for iPhone restart but it has not restarted. should I let him sit and wait or what? I need a phone that I am traveling out of State tomorrow morning

  A DFU restore usually recover the phone:

  • Install the latest version of iTunes on your computer, if it is already there ((you must have Windows 7 or later or OS X 10.8.5 version or later version)
  • Restart your computer
  • Disable any antivirus and firewall
  • Launch iTunes
  • Connect the cable of the device to a USB port on the computer (not a USB hub), but DO NOT CONNECT to the DEVICE AGAIN
  • Press in and hold the HOME and SLEEP at the same time for 10 seconds exactly, buttons until the screen goes black, then release the SLEEP button but continue holding the HOME button. If the Apple logo appears then that now the two buttons, you who was held for too long; start over.
  • While holding down the button HOME connect the other end of the cable to the device
  • You should see a message in iTunes saying there were a phone in recovery mode (it can take up to a minute for the message appears). When you see this message release the HOME button and the device must be restored. When asked DO NOT restore a backup. set up as a new phone.

  Try several times, if this does not work the first time; It is difficult to do in DFU mode.

• stuck in an infinite loop to lock the Explorer

  This is the biggest problem of vista, that I have had since I started using the new 07

  I did accidentally drag a folder and the left edge of the desktop to create a toolbar in the process
  I didn't know this feature before and thought it was great... but then I dragged accidentally the same folder in this toolbar, creating a sort of infinite loop. Now explore keeps freezing upwards and restarts every 10 seconds... even after several reboots and safe mode

  I say to myself that I could remove this folder on the desktop to solve this problem, but explore crashes as soon as I touch anything on the desktop. Everything else, including firefox, sounds good, but how you can use windows without exploring right?

  any help will be appreciated

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  If you can get in the face of this problem, System Restore should put everything back to normal. You may need to use the floppy start-up or a recovery disc to access this option.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps from another computer or on the problem if you can get into safe mode with network and it doesn't have the same problem).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.