I can't connect to the Modules page to get new ones

Similar Questions

• Can only connect to the home page after the host switch

  We went from a customer site hosting companies.
  We have implemented a new Contribute connection key, but we can only change the home page. Other pages we sail to display this message:
  You are viewing a page on a Web site that you have not created a connection to.
  
  Double checked the permissions and records, that the key is allowed access too and it's all good.
  I must be missing something. Is it possible all the LCK files are corrupt?

  Hope this helps somehow.

  He did it!
  You have helped narrow down what needed to be done and focus on the folder that holds the keys.

  Something went wrong when I tried to "Administration the SIte" in Dreamweaver in Contribute. The same error kept produced (even after I updated the IP address).

  I found myself:
  1: remove the _mm folder
  2: setting up a connection through Contribute (not using Dreamweaver / manually enter the FTP information)
  3: login to the site and check that I could change all the pages. (Hooray for that!)
  4: returned and got into place as an administrator through Contribute.

  Thank you from me by browsing. Much appreciated!

• Try to connect with valid credentials, CC sign me out, I can't connect to the web page with the same credentials. What is going on?

  I need to know if everyone is having the same problem. I'm on a MacPro, to 2009, with 32 GB of RAM, OSX 10.9.4 - is there any required software, Java, for example, it's that I need installed? Need help. Thanks in advance for any help.

  Hi William,.

  Please see the below help document to uninstall the creative cloud of your machine:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Kind regards

  Sheena

• WRE54G cannot connect to the configuration page

  I use WRE54G and I can't connect to the device.  I have connected to my computer via a cat5 cable, but I can always connect to the Setup page.  Right now I'm getting a solid light.  I tried to connect to the unit when it shows the kept my "no internet wireless network
  access and have this problem for a few days.  I tried to use a static ip address and reset the unit, but nothing has worked.  I can't ping the unit either.

  I am very good with computers, but I can't understand this thing.

  What is the model of the router?

  By default the ip address of the WRE54G is 192.168.1.240... So assign ip address 192.168.1.10 subnet mask 255.255.255.0 and default gateway 192.168.1.240 on the computer which is connected to the WRE54G via cable.

  If it's still could not open the configuration page, then restart the WRE, power cycle the WRE and then try again.

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• I can not connect to the page member ESPN.

  Original title: Windows 8

  I am trying to connect to my Member ESPN page, I am told that I can not connect because the cookies must be enabled. Then, I went to internet and active options cookies for a higher medium setting and then a framework to accept all cookies. Both still did not connect.

  Have you tried all the other links provided?

  See if another program, maybe Anti Virus or other program of type safety, interfere with your access.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Can not connect to the Oracle application server management page

  Hello
  
  I installed Oracle Application server 10g (10.1.2) on Solaris server.
  
  I can connect to host the server Apps page
  
  http:// < xxxx >: 7777 / - it works.
  
  However, I am not able to connect to the control page
  There is a link to it on the right side of the home page.
  "
  To manage and monitor Oracle Application Server, connect to Oracle Enterprise Manager 10 g Application Server Control:
  "username: ias_admin"
  
  http:// < xxxx >: 1156 / - it don't work -
  
  What could be the problem?
  
  Thank you
  Rane
  
  Published by: dgrane on November 21, 2008 16:29

  Default password for user 'oc4jadmin! I'm not aware of this user in 10.1.2.x, maybe there's one of OC4J side but not otherwise. If you are looking for credentials to connect to OracleAS controls (EM), the username is "ias_admin" and password is the one you specified during the installation. There is no default password. Refer to this:
  http://download.Oracle.com/docs/CD/B14099_19/core.1012/b13995/tools.htm#i1075023

  Thank you
  Shail

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• LAPN600 could ' t connect to the admin page

  Hello.

  The first time that I also tried to connect to the admin page it worked. But now when I try to connect if I'm lucky, I can log in, but after that I just got "page cannot be displayed".

  I HAV tried to reset the LAPN600 but it dosent resolves the problem.

  Someone at - it more then me that have this problem?

  I found the problem. It was me

  When I tried whit my windows 7 computer was wired and my Windows 8.1 was wireless.

  I found a setting "Access of Configuration management->" Wireless: activate

  So my problem is solved.

• can not find on the web page hp H470 bluetooth driver for win 8.1

  can not find on the web page hp H470 bluetooth driver for win 8.1

  Downloaded the full software, stops and States that the h470 is installed and no problems were discovered. only allows a test page to print when connected by usb. show / not allow an option to install the bluetooth drivers. If I remove the usb key indicates that the h470 is not discovered even if I have a bluetooth installed in the Pavilion and the h470

• When I reinstall windows from my dell disk, everything is great and there are no programs. Also, I can't connect to the Internet.

  Good so I bought a Dell Inspiron of the 620 years for the game and I had to reinstall Windows 7 on a drive I ordered from dell. So I reinstalled Windows 7 and now I have a lot of problems. So first of all it seems very strange, the taskbar is not transparent and all the buttons are very weird. Also, there are no programs in the start menu. Secondly, it is said there is no Internet connection available, but I plugged in everything. I can also connect to the Internet on other PCs as my laptop. Any help is necessary, because I really want to return to the game. :)

  Hello

  When you reinstall the operating system, you must obtain the latest drivers for Windows 7 Support of Dell.

  Go to this link for your model, and then select the operating system > and then select the correct chart, drivers etc. :

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-620s

  For network adapter drivers, you can use the computer you are about to post here to go to the link above of Dell > download and save the software drivers for the office > transfer using a Flash drive and install it on the problem machine.

  Then use your game machine to get the rest.

  And here's how to reinstall using a disc from Dell:

  "How manually reinstall Windows 7 on a Dell computer.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=&l=&s=&docid=266457

  You will need

  • Dell operating system installation disc
  • Dell Resource CD/DVD (also available on the page Dell drivers and downloads )
  • Any software and/or the documentation of your connection to the internet service
  • Any application install disks
  • All install disks for external (such as a printer) and added to your Dell devices after the purchase of internal devices

  See you soon.

• BlackBerry smartphones can not connect, reset the password for the update!

  forgotten my password.  When I go to the login page, I get my e-mail address, click on 'forgot password' and it comes up with a new page where I get my new email address, and there is a picture of 6 letters/numbers that I'm typing in order to reset my password.  I type in exactly as stated, click on 'submit' and it comes up saying "image does not correspond to" or something like that.    I entered it exactly as shown.  No matter how many times I do it, he only says 'no match' - so, I can not connect, or if I can reset my password.  To make things worse, there is no method communicating with blackberry, or anyone who is competent in order to obtain assistance.

  Seems I am dead in the water and locked forever.  It seems that many others have the same problem with no path for resolubion.

  gandcsundvik wrote:

  To make things worse, there is no method communicating with blackberry, or anyone who is competent in order to obtain assistance.

  You must call Sprint, they are your software first line and the device's hard support channel. If they cannot solve the problem, you must ask them escalate the problem to a support technique level RIM. They will, and if they do not offer to do so, you must request this firmly.

• Error found: iP1600 printer can be connected to the network

  Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7

  Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.

  I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?

  Hello

  I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.
  PIXMA iP1600
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware
  Hope this information helps.

• Unable to connect to the download page

  I want to download adobe CS6 on a mac and when I sign in the download page by following the instructions to download safari says "unable to connect to www.adobe.com' can help you please?"

  Thank you!
  Victoria

  Hi Jeff

  Please come back to me - I've sorted in the end - something to do with the proxy on the mac settings.

  Concerning

  Victoria

  > Wright A Jeff [email protected]> 15/05/2012 17:43 >

  Re: Unable to connect in the download page, created by Jeff A Wright ( http://forums.adobe.com/people/JeffhasWright) for download, installation, commissioning - discovers the full discussion ( http://forums.adobe.com/message/4409333#4409333 )

  Having same trouble if you use a different web browser?

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4409333#4409333

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4409333#4409333. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion for download, installation, commissioning by email (mailto:discussions-community-download_install_setup@mail.forums.adobe.com ) or the Adobe Forums ( http://forums.adobe.com/choose-container! input.jspa? contentType = 1 & containerType = 14 & contain er 4671 = )

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

  Click here ( https://www.mailcontrol.com/sr/VH5dnhuJ0yrTndxI! oX7UnVkeCoQDDL2HjUlVITDxQRZrEYhSecAlntfJopcq60Adtp7c4fPHQE4zD1Sgchg ==) to report this email as spam.

• Can not connect to the WiFi on MacMini 2014

  When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

  In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

  I tried transferring a file using release from my iPad to MacMini. It worked.

  When I tried to connect to the MacMini with ethernet cable, it worked too!

  The only problem is that I can't connect to the router using the wifi on my MacMini.

  What should I do?

  Try to create a new network location:

  Using network locations (Mac OS X 10.6 and later)-Apple Support

  Try to connect as a different user.

  Have you removed the Mini?

  AirDrop uses bluetooth

  http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm