iPhone will not connect to 100 hp officejet

Similar Questions

• iPhone will not connect to my wifi

  I did no update. This morning all of a sudden my iPhone does not connect to my wifi. As there is a block or? on this subject. Weird

  Hello

  Tap Settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password in settings > Wi - Fi.

  If this does not help, try here > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• iPhone will not connect with iTunes on a Sony Vaio laptop (Windows 7)

  I can't connect my iPhone to iTunes on my Sony Vaio laptop. I tried uninstalling and reinstalling iTunes several times, as recommended on the Apple Support communities, nothing helps. I also deleted and set my phone from scratch. The device is recognized as a storage device, but not iTunes. Can someone please advise as to why this would be the case? As far as I know, everything on my laptop is up-to-date and the phone will not always be recognized.

  Thank you.

  You've probably seen this already, but if not - http://support.apple.com/kb/TS1567 and http://support.apple.com/kb/TS1538 peuvent help (helped when my iPod is not in the same way).

  If no joy, as a trial of test creates a new user account and see if it can connect to that?

• IPhone will not connect to iTunes - "invalid response received from the device."

  After years of work very well, I went to put some new music on my phone and all of a sudden got this message "iTunes could not connect to the iPhone 'IPhone of David Platts' because an invalid response was received from the device."?

  I've tried different USB ports, different cables (some Apple official, some after market) and several reboots, but nothing works.

  I'm 10.7.5 OSX and IOS 10 phone you.

  Thanks for the help.

  You have a problem.

  It is good that you have told us you're OS x 10.7.5 (current is MacOS 10.12), because it is your problem.

  iOS 10 requires iTunes 12.5.1 or later to communicate.  iTunes 12.5.1 requres OS X 10.9.5 or later version.

  It's (time to upgrade the operating system of your Mac spent).

  macOS - official Apple Support

• iPhone will not connect to the WiFi at work

  At work (school system), we have a network (with login) and a network of "guest." My notebooks usually connect to 'trust' (the MacBook Pro more surely than the MacBook)-my iPhone will connect to the network "guest." Is it normal? Is there a solution?

  The iPhone should be able to connect to the secure network, as well.  Refer to the section 'connect to a network secured Wi - Fi' in:

  To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

• iPhone will not connect on wifi

  my iphone 6 does not connect to the app store without wifi, I tried many things even a restore of the network, and nothing works. What can I do else?

  Try these steps If you cannot connect to a cellular or cell - data Apple Support Network

• IPhone will not connect to Windows

  Hello world

  I'm sure it's an old problem, but my iphone 4S does not connect to windows. When connected, it makes the sound of the connection and the accusations but itunes and windows explore does not see the phone. Same 3rd apps from third parties like copy Trans cannot see the iphone too.

  My ipod classic always connects.

  Have you ever tried the troubleshooting steps mentioned in this article?

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

• My iPhone will not connect to iTunes, but connects to my laptop

  I recently installed the latest update to iTunes and after that installation of this update iTunes does not recognize my device. I then installed version 12.4.1 in the hope that it would solve the problem but it didn't.

  I tried uninstalling iTunes and reinstalling it but that has not worked.

  It does not connect with my iPad either, but both devices connect to my laptop.

  I have windows 10.

  I have this same problem do you know how to fix it yet?

• iPhone will not connect to iTunes for Windows 7 upgrade

  My iphone 3G shows in my computer, but not in iTunes since upgrade to Windows 7. It is used to recognize the iPhone with a picture of him in the AutoPlay box. Now, instead, it shows a camera.

  I have installed all windows updates. Uninstalled and reinstalled all itunes related programs completely and still can't solve the problem. I plugged the PC of a friend on windows 7 and it appeared that it was in mine in its itunes.

  Does anyone have a solution?

  I found this solution.  My symptoms are that windows 7 64 bit detected my iphone, show it in devices such as cameras and Printers window and would transfer photos on the iphone, but the iphone do not show up in ITUNES.  I followed the suggestion to http://forums.techarena.in/guides-tutorials/1168298.htm that says basically made a right click of the camera of the iphone, update the driver using the driver to c:\program files Apple Mobile device support\drivers.  The system has added a new device in the devices window and printers, saying: Apple Mobile Device USB Driver, once again with the same camera icon.  ITUNES now once more shows my IPHONE and sync up without problem.

• NIC will not connect at 100 Mbps switch

  I installed VMware 3.5 U3 on 3 HP BL460c blades. I am trying to connect to a switch of 100 Mbps for a VM networks. No network adapters connect to a switch of 100 Mbps, as well the NICs embedded or the NPI NC364M. The status of the env said simply disconnected, and it's not even a light on the switch. Connect a laptop to the NIC with a crossover shows connectivity when the laptop NIC is 1000 but drop down to 100 and the connect light turns off. Connection to a 1000Mbps switch works fine.

  I tried to use the esxcfg-NICS command to set the speed and binary rhythm to 1000, 100 Full Full/Half and 10/half. No luck

  I tried to use ethtool to adjust the speed of the NETWORK card to 100, but the results ' cannot set new parameters: function not implemented.

  The result of ethtool says:

  "Supported binding modes: 1000baseT/Full.

  This means that the NETWORK card supports only 1000? I find it hard to believe that both the NC364M and the embedded NICs are experiencing this problem. Can anyone help?

  It is a problem of capacity of the equipment. The network to blade interface is designed to 1000Mbps and this is how you will link with her.  Please consult the card of HP:

  http://h18000.www1.HP.com/products/servers/networking/NC364m/specifications.html

  http://h18000.www1.HP.com/products/servers/networking/nc373m/index.html

  It is true, that they take over only 1 Gbps connections. If your 2960 uplinks are available, try them and see. Note that the interface of Cisco 1000 t is only 1000Mbps too - it is not just a thing of the blade. Optimized for connections of 1 Gbit/s do not always have options to speed restoration of the interfaces (i.e. 10/100/1000). It is particularly common in the blade architectures.

  -Collin C. MacMillan

  SOLORI - Oriented Solution, LLC

  http://blog.Solori.NET

• iPhone will not connect to WiFi

  I have an iPhone running iOS 10 6. Since I have updated to iOS 10, I had problems connecting to WiFi. It happened the first time I've updated and I read that it could be some issues with the latest iOS, therefore, some recommendations to restore the iPhone, I did and it set for a few days, but once again, the issue is back.

  When I go into WiFi mid settings it does not recognize my WiFi network, but as he said 'safety recommendation' when I hit I got a message that says "low security, WEP is not considered as safe. Configure your router to use WPA2-Personal (AES) security type for this network"

  This message never came until it again once I have updated to iOS.

  Any thoughts?

  Thanks in advance!

  Hello

  Follow the steps here:

  • If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
  • To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  • Recommended settings for the WiFi routers and access points - Apple supported

• IPhone will not connect to itunes

  I get the error message

  "The"Iphone of Jenifer"Iphone cannot be used because it requires a newer version of Itunes. Go to www.itunes.com to download the latest version of iTunes. "

  Well, as a first step, this IPhone 6 more belonged to my mother and she connected and synced to itunes version 12.1.2 for windows 8.1 perfectly fine on my laptop. She gave it to me so I restored it. Updating to the latest as well, but when I try to plug in the USB on the same laptop and the version of itunes, I get this message on itunes. So I check the updates on itunes and it says its updated. I went to the site itunes, and said that the latest version is 12.3.3 so I download it but when I try to run together until I just get another error! In saying that I can't run this version!

  What can I do to fix this please and thank you. It worked fine before.

  Follow the instructions to uninstall and reinstall iTunes here > Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  If you haven't already done so, you will need to disconnect his Apple ID on the iPhone in settings > iTunes and App Store > Apple ID and sign in using your Apple ID. Be aware, all content downloaded from his Apple ID is deleted. You must be connected to iTunes on the PC using your Apple ID in order to sync the iPhone.

• My iPhone will not connect to iTunes and iPhoto

  My iPhone 6 connect to iTunes and I have this music... I'm so sad now, please help!

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• IPhone will not connect to itunes on Windows 10

  Recently I noticed that whenever I try to connect my iPhone 5 c (with the USB cord) to my laptop (currently Windows 10) to sync all my music, it does not / is not recognized at all. I tried every different USB port, I tried:

  -Restart each device

  -Uninstall and reinstall iTunes

  -Check for updates for both devices (whether they are for the program, drivers, or for each device itself, I.E. of IOS or Windows)

  -Through the Apple website and followed all the troubleshooting guides (iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support)

  I don't know what else to do or try, and I just want to listen to my music. Any help would be really appreciated.

  The features are: iPhone 5 c, running on iOS 9.2; 10 Windows on a laptop

  What # is clocked at iTunes version? Please don't say later, thanks to a number.

  11.x? 12.x?

• iPhone WILL not connect to iTunes; Is recognized by PC

  So, I recently got an iphone which is an update of my 5 c which was a 16 GB to 64 GB. When I plug my SE however, it won't connect to iTunes. My 5 c doesn't always work, and all of my software is up-to-date. I tried the suggested driver update method, but is updated as well. I also tried to turn off the computer and the phone and different USB ports and cables. I have a Lenovo laptop. My phone is recognized by my laptop like 'Apple iPhone '. Can someone help me solve this problem? Thank you!

  What version of iTunes on your PC you have?