IPhone will still seek 2 G frequencies when 2 G becomes off

Similar Questions

• IPhone will randomly go no Service when it is locked

  Sometimes, when I have my iphone locked 5s, the service will say 'No. Service' and then when I unlock the phone it comes back as "AT & T", why this is happening? I usually great service in my area also.

  A question, where are you located? It seems that AT & T has done a few upgrades network lately. I read on the forum here of a user having problems on the market of Portland, in Oregon, and I experienced a few problems in the Chicago market. You can check with AT & T or you can use their app on the phone, marks the point to send information to AT & T on the problems in a certain place.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• My iphone is no longer on my mac when I connect ny pluging it appears on my imac, and open itunes. I get a message that says I need to upgrade to the latest version of itunes. I have the latest version on my computer. Help

  When I open itunes, I can no longer be sunch my iPhone. I get a message that says that I need to update to the latest version of itunes. But I have the latest version of itunes on my imac.

  My mac running OS x 10.6.8

  My version of itunes is 11.4

  My iphone is running OS 9.3.2

  
  

  If I uninstall itunes and reinstall I lose all my data, applications, contacts, photos and songs?

  You need Cougar 10.8.5 or later version to run the latest version of iTunes which is 12.4.0.119

  That the iPhone will need iTunes 12.3.3 or higher

  You can download Mountain Lion here

  http://store.Apple.com/us/product/D6377Z/A/OS-x-mountain-lion

  Or you can update to El Capitan if your Mac is capable

  Support Apple OS X El Capitan - technical data -

  You did not provide the specs on Mac-

  See also this thread

  Re: How to restore iPad again when the message says need new itunes version

• New iPhone will not appear in iTunes, but old will

  Only, I went to verizon and purchased the iPhone 6 s. I have the iPhone 5 s. I created a backup of 5s on my computer in iTunes (the latest version). I restored the iPhone 6 s at startup screen. Whenever I get to the screen saying connect to iTunes to restore the backup, nothing happens. The iPhone will appear in the post. I have uninstalled and reinstalled iTunes. Both phones are updated to the latest software. I noticed that the apple mobile hub is not displayed in the devices (Apple Mobile Device USB Driver), but the apple mobile program is installed. Uninstalling and reinstalling itunes was supposed to solve this problem, but didn't. The computer had some updates, but nothing to really what appeared to be related. Any help would be great! I'll try to go to the Apple store to transfer my phones data because it is too big for icloud, but I'll need later so that it can connect to iTunes. It is very odd that the 5s will connect and show, backup, etc in iTunes, but the 6s won't. I have windows 64xbit 10.

  I tried to restart the computer, phone, etc.. I also tried to restart the apple mobile software and restarting. I also checked that there are only 3 associated devices, so it is not the limit of 10. Nothing appears in iTunes when I plug the phone in. even not an error message. Also whenever the phone is put in place and I plug it into the computer it asks only if I have will allow computer access the content on phones, but I don't get the message of "confidence".

  He fixed it. The phone is now restore.

  Windows Vista, Windows 7 or Windows 8

  1. Right click on the iPhone of Apple, Apple iPad, or Apple iPod entry in Device Manager and choose Update driver on the shortcut menu.
  2. Click on "Browse my computer for driver software".
  3. Click on "Let Me pick from a list of drivers for devices on my computer.
  4. Click the disk button. (If the disk option is not present, choose a category of devices such as Mobile phone or if storage device list and click Next. The diskette button will appear).
  5. In the "Install from disk" dialog box, click the Browse button.
  6. Use this window to navigate to the following folder:
     C:\Program Files\Fichiers Apple Mobile Device Support\Drivers.
  7. Double-click the file "usbaapl. (This file is called "usbaapl64" If you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers. instead).
  8. Click OK in the dialog box "Install from disk".
  9. Click next and complete the steps to install the driver. Open iTunes to verify that the device is properly recognized.

• Still access Youtube and Facebook when both are blocked?

  Why does show that my child is still access youtube and facebook when both are blocked?

  Hi all

  Family safety records as a child Web sites visits as part of the activity reports tracking feature.

  Even if the site is blocked, it will still show on the activity reports that the site is visited. This will tell you which site is the child trying to access. It is natural that this information reflected in reports if you do not have to worry if the website that you have blocked. Just make sure that you have blocked the site and the customer to parental control settings are updated.

  For more detailed information on accessible websites or visited by your child, we suggest that you go to the tab Web activity under activity tracking. In this tab, you will see the web address and the measures taken (blocked, permitted) by parental control.

  Thank you.

• I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

  If you date something on it so that it remains not.

  I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  Hey Roscoe,

  If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

  For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

  I hope this helps.

  Good luck!

• Recovery disks will still work if I wipe the HARD drive?

  Hey everybody! I have a quick question and I hope one of you can tell me if I'm about to make a huge mistake.

  My HP Pavillion Dv6 had serious problems and chkdsk deleted a lot of clues. I worked on the problem of HARD drive and looks is not default (no bad sectors, only of weakness). I read that zero-filling can help with HARD drive problems.

  My only question is that I don't know if I'll be able to just reinstall after I have zeros, because the building programs will be wiped. I have an application and Driver Recovery CD and a DVD of system recovery that I have used before. These will still work if I have zero filling? Or I need something else?

  Thank you very much for your help!

  Sadie

  Hi Sadie,

  Yes, your recovery disks will work if set you to zero the whole HARD drive (they would also work on a new HARD drive if you need to replace the existing one).

  When reloading the operating system, you choose the "Factory Reset" option will reinstall the OS and recreate all the original scores.

  Kind regards

  DP - K

• my laptop will not find my wireless network when I'm trying to relog. I then reboot the computer to make it work

  I can be on my laptop and the internet works fine, but if I close my laptop and come back, sometimes it will not open a session. When I try to connect to a wireless network, it will appear not all networks at all and I live in a condo and I usually pick mine as well as a dozen other choices. The laptop won't restart when I try to shut down or restart, it just goes in the part of the judgment of the process, but goes no further. I have to manually hold the power button to shut down the computer.

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• BlackBerry Smartphones Verizon Will still work if I unlock my BB Storm 2 Verizon / 9550

  Hello

  I hope I'm not duplicating an existing thread... but could not find the question / answer until now.

  I have really two questions (which are linked)

  1. I have a BB Storm 2 on Verizon and purchased an unlock code. However, before unlocking, I wanted to make sure that I can use my phone / email / data from my existing Verizon account. The reason why I'm unlock the phone in the first place, is that I want to give my mother in Germany in about a month, which will be used with a different local provider.

  2. once I give the phone to my mother in Germany, she would be able to use it just via WiFi or she will have a provider and the data plan to send e-mails? She didn't really need it as a phone, just to send by e-mail. I don't know, however, whether she would be able to put up with an e-mail account if it doesn't have a regular wireless provider.

  Thank you very much!

  Hello

  Don't worry, you will still be able to use your phone on Verizon when unlock you. Be sure to enter the code carefully and that you get only 10 tests and then it will be permanently locked to Verizon.

  Once you give the phone your mother in Germany, she will be able to use the browser and a few apps through wifi, but if she wants to use the features of e-mail or something like BBM, it will need a BlackBerry data plan (a regular data plan is not enough). So now, if she is simply using a service like Gmail or Hotmail e-mail, she can just connect via the browser on wifi and manually check his emails. But it's the only option for wifi use.

  I hope this info helps!

• I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was invited to give my serial number for the update that was not the case that are on my Adobe profile, although I purchas

  I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was not invited to give my serial number for update is no where on my Adobe profile, although I bought and pays every month for my creative cloud for photography. Help, please

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• If I cancel my subscription will still be able to use the products that I downloaded?

  Hello

  I wonder about buying a subscription cloud creative adobe but I want to know if I will still be able to use the producats I downloaded if I decide to cancel.

  Laughing out loud

  Other than the initial trial period of 30 days, you may use the software only if you pay a member.

  This is a subscription service. As a Subscriber, you can use the software. When you cancel, you lose access until you join.

• iPhone will not connect to the WiFi at work

  At work (school system), we have a network (with login) and a network of "guest." My notebooks usually connect to 'trust' (the MacBook Pro more surely than the MacBook)-my iPhone will connect to the network "guest." Is it normal? Is there a solution?

  The iPhone should be able to connect to the secure network, as well.  Refer to the section 'connect to a network secured Wi - Fi' in:

  To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support