IPMI error code 2900:0221 Power supply failure detected on PE R710

Similar Questions

• R815 error code 2900:0221 CPU voltage sensor

  One of our servers R815 (fitted with quad CPU of Opteron AMD 6380) arrested and turned off during the night last week and arrive in the server room, I noticed that the LCD had turned orange with a warning on a CPU being out of range voltage regulator. After unplug power cords, wait a few seconds and plug it back I turned on the server back once again and the message from the LCD and the server started normally.

  So I ran hardware UEFI diagnostics and it came with an error:

  Test results: fail

  Feature: IPMI

  test: IPMI System_Event_Log_Check

  Error Code 2900:0221

  MSG: IPMI - Nov 04 18:08:34 2015: processor: voltage sensor (1, 2V VDDR)

  State asserted "CPU1".

  Is this something to worry because the server is running at full load on all processor cores 64 for 5 days without any problem? Or is the error message refers to the IPMI/BMC processor and not the Opteron processors?

  Andy

  Hello.

  The procedure to follow before you run any diagnostic is to clear the logs from existing material. The 2900:0221 error Code represents an error previously saved and diagnostic tests failed because only the system chosen this historical error (2900:xxxx). Update the BIOS firmware and iDRAC. Otherwise, everything should be good for now.

• Error code = Ox496 after the boot failure

  I recently met a boot failure and after starting "repair" I was informed that:

  Verifying the integrity of system files and repair

  Result: failed.  Error code = Ox496.

  Please how can I deal with this problem.

  OS: Windows 7 Home Premium.

  Thank you

  Curiousroblin

  See if the answer in this thread helps:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-files-integrity-check-and-repair-failed/51b0cc28-16ed-4C75-95AC-a11a13b22a85

• I have xp a xps 400 newdell and get audio, I get an error code 10 made power invited nothings working help

  I WORKED ON IT FOR DAYS, BUT I'M UNABLE TO GET AUDIO ON MY DESK!  I'M ALL TROBLESHOOTER IMFO LLA AND MAKE ALL READERS MADE AFTER ANY UPDATE DEVICE MANAGER I GET AN ERROR 10 MESSAGE AND OR CONTACT THE SERVICE PROVIDER BUT I THINK IM DISABLE SOMETHING AND IM READY TO TEAR MY HAIR OUT

  Hi Katiethornton,

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  For more information, you can consult the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  You can uninstall the audio drivers and try to install the drivers updated from the Dell Web site.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the sound, video and game in Device Manager controllers

  c. right-click on the audio device and click Properties

  d. click on the driver tab, click on uninstall the drivers and click OK.

  You can check the Dell support link to download the latest version of the audio drivers.

  Drivers & downloads for XPS/Dimension 400/9150

  Hope this information is useful.

• error code 0 x 205 Burn failure insert the blank cd or dvd

  I get this error code when you try to burn discs by default factory, under States details value General Exception was too large or too small for a type of int32 error code 517 DVD disc I tried 4 different DVD including - brands / +, I tried to format first mistake even differently each time. I know that I carved these when pc was new (it is 2 + years now) but I can not find them after the move. What this means and I can fix. I also did some windows updates and tried to find more recent drivers without success? Help, please!

  Hi TechnoDoug56,

  ·         What burning software do you use?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  You can run the below mentioned Fixit who automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media and then check out the question.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• error code 2000-0251 Power Edge T620

  Salve,

  a seguito di inaspettati riavvii del Server ho made it test hw per vedere is this fossero problemi.

  test of durante he ho received the error code in oggetto e che allégo come "mistake1.

  controllando it log poi ho rilevato anche altre 2 anomaly che allégo come "error2.

  both nel file errori.zip, rimango sono in attesa di sapere che cosa fare o che parte auswechseln is ditch necessario.

  Buongiorno,

  slab information if no sono critici o comunque non riconducono gli inviate went causa dei riavvii randomici.

  Nel dettaglio, sono if di apertura dello chassis, if di alimentatori, course a Febbraio UN th delle batteria della PERC che completa e he ciclo di carica my che torna later under normal conditions, a Luglio.

  Being it sistema fuori co, to vuole verificare he guasto in modo più approfondito dal nostro supporto tecnico can fornirle UN preventivo di spesa by the Telefónica diagnostica.

  MI tenga al corrente is wants further care, e the potro cars privatamente tramite e-mail.

  Grazie

  Marco

• access error code 0x80070005 and a catastrophic failure of the code ox8000fff

  I have SEVERAL issues w / pc - get a catrostrophic 0x8000fff error code when I try to back up files and get access denied when you try to do a restore system 0 x 80070005 and I'm having a time hard w / updates and windows defender turns along w / protection system

  Hi JessicaR1,

  Question: 0x8000fff

  This problem occurs because the backup process detects that the system drive is dirty.  Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.

  Follow the steps in the article to resolve the problem.

  http://support.Microsoft.com/kb/973558

  Question: 0x80070005

  Try to perform a system restore and see if that solves the problem.
  See the link below for more information on uninstalling programs:
  
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If the steps above do not help, try to do a restore system from safe mode and check if it works very well.
  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Try these steps and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error code installation with CC 132 failure

  Whenever I try to install Adobe illustrator by using the cc desktop application

  It says installation failed

  error code 132

  This is what worked for me.

  Go to https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and download the Setup file of Illustrator (s from there.

  Install the software. Open the creative cloud, sign out and then sign back in if necessary.

  -Peter

• hard drive failure. incomprehensible error code.

  HI: I have a no start hp G62-b20SA. The built-in diagnostics give me a failure code: GLQJK9-5LM681-9XLO3F-6OT303 and a product Id: XF390EA #ABU and 1 hard drive and a web URL.   What does this code mean?    I have been round and around the site, and nowhere can I find a box "enter your code of error here.    Can someon please explain what this means and what I can do about it.

  TKS

  Hello

  The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Error code: BIOHD-2

  * I forgot to put a check mark on the - mail me when someone answers - section *.

  Hello

  I'm helping a friend fix an error message received at startup - error: "echec failed boot drive, enter the system disk and press enter". Pressing F9: Diagnostics - results in all tests pass except the path of the boot: Error Code - BIOHD-2 WARNING: no drive detected.

  System:

  HP Pavilion Slimline mod. s3307c - Prod. # GZ727AA-ABA

  Windows Vista Edition Home Premium

  Seagate Barracuda 7200.10 - 320 GB HDD - P/N 9BJ13G-622

  I also have:

  -Checked to make sure there is no disc in the Atapi DVD Drive

  -Try another SATA - cable and double checked that all the cables are connected properly.

  -Call 800-HP-INVENT - they confirmed that he was no longer under warranty and directed me to their website - hp.com/go/support - am frustrated he then stumbled upon this Forum from HP Support.

  The option of Start Menu does not list even a HARD drive - it lists only the DVD player.

  F11: System Recovery - goes back to the same boot disc failure... screen

  The pc was purchased in 2008.

  How the hell did the average person knows how to solve this problem?

  Any help would be greatly appreciated.

  Maybe a problem with the drive CD/DVD like HERE there are several different drives / Firmware on the driver of the BIOS page here check to determine which drive you have. Or, if you have another computer with a disk that you can use temporarily to try to recover? Doesn't even have to be installed, I simply hooked up to a DVD player for cables and used.

• Error codes: 641, c1 & 80070641 (cannot install updates)

  Original title: Hi, I have problems with windows update. It says I have 5 important updates, but they do not work. I get error code 80070641, 3 641, c1. Can someone help me with this. Thank you

  Problems with Windows Update. 641, 80070641 and C1 error codes

  OK, you have failures of update for MSXML 4.0, work with .net Framework.

  So to install MSXML 4.0 Sp3 (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7f6c0cb4-7a5e-4790-a7cf-9e139e6819c0&displaylang=en ), uninstall Works 8 and install again.

  For issues of .net, remove .net Framework with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.asp x), reinstall it and updates with Windows Update.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Has no Windows update kb951847 80070663 error code

  original title: kb951847 80070663 error code

  Why should I install kb951847, kb979909 and kb982524 kb2518864 with error code 80070663 of the repeated failures?

  Hello

  1. You are able to install some other updates on the computer?
  2. You have security software installed on the computer?

  I suggest that you manually download and install updates, check if it works.

  Method 1:

  Visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 2:

  If the previous step fails, then see the below article to Microsoft for repair. NETFramework on the computer and check if it works.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

• Rattling noise - the graphics card or power supply?

  Hey guys,.

  I've had my HP Pavilion Elite m9300t for almost 1 year now. About half of that time, I had to deal with the annoying rattle noise that I attributed to one of the fans in the case. Unfortunately, my PC is equipped with GeForce 9500GS formidable card (with the black cover) and so noise, while annoying, is not surprising. The rattling noise has been stronger and more widespread during initialize and not significantly lower over time.

  But now I have an another problem and I'm not sure if the two are related. Now, the sounds rattling calms down (no noise whatsoever) and in 20-30 seconds, the screen empty... similar to the computer goes into mode 'sleep'. More funny thing is, the PC is set to operate at full capacity and therefore the 'sleep' mode. This problem started occurring 4 weeks ago and happen once a few days ago. Now, I am unable to work for more than 5 minutes after the initial upward boot before the screen turns off.

  I concluded (don't know if I'm right or not, where my post here) I have a power supply issue. The PC came stock with a 350W power supply, but I don't know if my linked overuse of heat damage on the motherboard or the power supply failure. I work with software music production and large audio files 70-80% of the time and the PC stays on for long periods. I am aware that these applications are stressful, but I'm not sure whether or not they can cause the types of symptoms that I described.

  So basically I guess what I'm asking is the following; is my problem, a graphics card or POWER supply number or both? Then based on the advice given, I would also like to know what the next step is to get my PC to 100%.

  Thanks in advance for the help.

  If your PC still work with a white screen, I would check the video card first, especially since you did not get the new & improved version

  Try to isolate the problem step by step, the PSU isn't necessarily the problem as the system is in place.

  Message edited by sclui56 on 08/11/2009 20:50

• OPatch failed with the error code 72

  Hello
  
  I try to apply the patches to the database, whenever I try to use opatch I get error below.
  ----------------------------------------------------------------------------------------------------------------------------------
  
  [oragold@apps OPatch] $ opatch lsinventory
  Citing O Patch 10.2 .0.2.0
  
  Interim fix installer Oracle version 10.2.0.2.0
  Copyright (c) 2005, Oracle Corporation. All rights reserved...
  
  
  Oracle home: /u02/oracle/PROD/db/tech_st/10.2.0
  Inventory Center: / home/oragold/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 10.2.0.2.0
  YES version: 10.2.0.2.0
  YES location: /u02/oracle/PROD/db/tech_st/10.2.0/oui
  Location of the log file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
  
  List of houses on this system:
  
  Name of the House = OraDb10g_home1, rental = "/ u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs".
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
  Possible causes are:
  Oracle Home Dir. path does not exist in the Central stock
  Oracle Home is a symbolic link
  The Oracle Home inventory is corrupted
  Failure of the LsInventory Session: OracleHomeInventory::load() gets oracleHomeInfo null
  
  OPatch failed with the error code 72

  Hello

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home
  The Oracle Home inventory is corrupted

  Please, check the following:

  (1) you have the last installed opatch
  (2) orainst.loc exists and it is not corrupted
  (3) inventory_loc in orainst.loc points to the good oraInventory
  (4) oraInventory exists and it is not corrupted
  (5) the local inventory exists and it is not corrupted

  If missing oraInventory, restore it from a backup, or please refer to recreate.

  Note: 274526.1 - how to download and install opatch (generic platform).
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=274526.1

  Note: 295185.1 - how to recreate the Global oraInventory
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295185.1

  Note: 360079.1 - Global inventory and Local explained
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=360079.1

  Note: 754667.1 - "Opatch Failed With Error Code 73' /var/opt/oracle/oraInst.loc pointing oraInventory bad location
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=754667.1

  Kind regards
  Hussein

• What is the average of 62:10 error code? I have a HDR-CX260v

  I just bought a camcorder HDRCX 260v, charge the battery, it works and see a flashing code E62:10. What does the code? Is this a serious question? I would return my new camera? Lee S.

  Hi the dregs,

  The E:62:10 error code indicates that the camcorder has detected a problem that requires service. Before sending the camera for service, please visit this link: https://us.en.kb.sony.com/app/answers/detail/a_id/39511 and see if it solves the problem.

  If the camera reset does not help, use the following link to set up a repair for the camcorder.

  https://eService.Sony.com/

  If my post answered your question, please mark it as an "accepted Solution".